Pusat penggilingan balik CNC

Takisawa TS 3000 YS

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2017, jam operasional: 132 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20731, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 300 mm, gerak cepat sumbu X: 90 m/menit, pergeseran cepat sumbu Y: 90 m/menit, pergerakan cepat sumbu Z: 90 m/menit, daya nominal (semu): 35 kVA, produsen pengendali: Fanuc 31I, kecepatan spindel (maks.): 42.000 rpm, jam operasional spindle: 132 h, pasokan pendingin: 20 batang, daya motor spindle: 15 W, hidung spindel: HSK E40, tegangan masuk: 415 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Die Maschine befindet sich in einwandfreiem Zustand. Die Bearbeitungsgenauigkeit beträgt +/- 0,0015 mm (gemessen mit Zeiss Micura). Die Maschine ist mit Renishaw OMP400 und BLUM Pico zur Werkstück- und Werkzeugvermessung ausgestattet. Die Wiederholgenauigkeit liegt bei +/- 0,001 mm. Hochgeschwindigkeits- und Hochgenauigkeitsoption auf Fanuc ist vorhanden. Die Maschine kann unter Strom besichtigt werden. Gijdpfovcfi Dox Adtel

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with 225 mm centre height Base Model: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - B-axis infinitely variable, high resolution - Marposs measurement system for tool setting - Active longitudinal positioning - GAP control at T1 and T2 from ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt-driven Options at Additional Cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (lead time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic leadscrew in X - New hydrostatic system with only one pump and accumulator for better energy efficiency - Monitoring of water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New state-of-the-art CNC cylindrical grinder control system with BEMA cylindrical grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical wiring, Berus pressure switch, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s equipment. Basic software - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zeroing - Grinding wheel zeroing - Measurement of dressing diamonds - Two form diamonds - One form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - Three flat dressers - Corrections - Z-position measurement (probe required) - GAP touch detection (touch dressing device required) OPTIONS at additional cost: Software for profile plunge grinding: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single and multi-start external and internal thread grinding with threads dressed on the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Trapezoidal thread grinding software: Giodsuxfucopfx Adtel - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Non-circular grinding software: Non-circular grinding requires the workpiece axis to be equipped with a high-resolution rotary encoder to operate the axis as a C-axis. The non-circular...

Tahun pembuatan: 1990, Kondisi: baik (bekas), nomor mesin/kendaraan: 92041, Table clamping surface: 410 x 900 mm Gsdpfedhhprex Adtsil Travel (X/Y/Z): 560 / 410 / 380 mm Spindle taper: SK 40 Spindle speeds: 22 - 6000 rpm Feed rates: X and Z up to 10,000 mm/min, Y up to 240 mm/min Required floor space: 2,600 x 2,000 x 2,300 mm Weight: 3,500 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.160 mm, jarak lintasan sumbu Y: 762 mm, jarak gerak sumbu Z: 650 mm, gerak cepat sumbu X: 24 m/menit, pergeseran cepat sumbu Y: 24 m/menit, pergerakan cepat sumbu Z: 24 m/menit, produsen pengendali: FANUC, model controller: FANUC 0i-MD, tinggi total: 3.170 mm, panjang total: 5.500 mm, lebar total: 2.892 mm, lebar meja: 760 mm, panjang meja: 2.160 mm, beban meja: 1.800 kg, berat keseluruhan: 15.000 kg, kecepatan spindel (min.): 60 rpm, kecepatan spindel (maks.): 12.000 rpm, pasokan pendingin: 20 batang, jarak dari tengah meja ke hidung spindel: 800 mm, daya motor spindle: 18 W, hidung spindel: ISO 40, jumlah spindel: 1, jumlah slot dalam magazin alat: 40, panjang alat: 300 mm, diameter alat: 80 mm, berat alat: 8 g, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Used vertical machining center “DOOSAN model DNM 750L-” with FANUC 0i-MD CNC Godpow D Aynefx Adtoil

Tahun pembuatan: 1983, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General Information / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition - Pulling force: 16,000 kg - Broaching length: 1,250 mm - Broaching stations: 3 units - Distance between broaching stations: 125 mm - Clamping diameter for draw heads: 3 x Ø 80 mm - Pass-through width between cylinders: max. 435 mm Gedod Nb A Nopfx Adtoil - Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min - Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min - Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit base) - Power supply / rated connected load: 380 Volt, 50 Hz / 22 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-operated draw heads according to DIN 1417/18 for locking broaching tools in the draw bridge. The needle extractor heads in the tool feeder are hydraulically locked. The machine includes a coolant system with integrated magnetic band chip conveyor for installation in a pit. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in serial production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle extractors are available upon request. The machine can be inspected at our warehouse.

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 10.000 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.105 mm, diameter pembubutan: 610 mm, kecepatan spindel (maks.): 3.500 rpm, lubang spindel: 70 mm, jarak pergerakan sumbu X: 580 mm, jarak lintasan sumbu Y: 210 mm, jarak gerak sumbu Z: 1.137 mm, diameter pemasangan: 63 mm, kecepatan rotasi (maks.): 6.000 rpm, jenis arus masuk: AC (pendingin udara), Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, The machine is in good condition. Major maintenance work carried out in recent years: 30.04.2020 Spindle overhaul CHF 35,000 16.07.2021 Software update (Wenk AG) CHF 1,600 20.06.2022 Central lubrication pump replaced CHF 400 (All prices quoted in CHF) Known defects: · Error message during startup · Coolant leaks at the rear of the milling spindle during internal cooling · Overload warning when machine is cold and at 100% rapid traverse · Over 150 assorted tool holders included · Spare tool magazine bushings Gijdexp Hmajpfx Adtsl · Spare limit switches for tool changer position monitoring · 2 pcs. 3-jaw chucks, diameter 250 mm (mounted for inspection) · 1 pc. 3-jaw chuck, diameter 250 mm · 1 pc. 3-jaw chuck, diameter 300 mm · 1 pc. 4-jaw chuck, diameter 400 mm · 2 sets of hard jaws for external clamping, short version · 1 set of hard jaws for external clamping, long version · Various used sets of soft jaws · Replacement filters for Kowap high-pressure unit (5 in stock, approx. 2 at delivery – each filter approx. CHF 20–25) · Coolant cleaning unit or oil separator (custom-built) · Cabinet adapted to fit the tool magazine for KM63 holders, numbered with 80 slots · Specific clamping accessories suitable for KM63 holders, featuring direct indexable insert clamping · Iscar disc milling cutter suitable for one holder, D160mm width 4mm · Gear milling cutter suitable for one holder (custom-built – for soft jaws, p=1.5mm) · Cleaning/deburring brush suitable for one holder We are happy to provide you with leasing and financing options for this machine. An inspection appointment can be arranged by request.

Tahun pembuatan: 2012, Kondisi: baik (bekas), de-Muratec MW120 GT zu verkaufen Gebraucht, in ausgezeichnetem Zustand. Die Maschine kann nach Terminvereinbarung besichtigt werden. Gsdpfx Asifi D Tedtjil Der Transport liegt in der Verantwortung des Kunden, wir können jedoch bei Bedarf beim Verpacken und Verladen behilflich sein. Lieferung: EXW Székesfehérvár

Kondisi: hampir baru (bekas), Tahun pembuatan: 2011, jam operasional: 9.080 h, Fungsionalitas: berfungsi sepenuhnya, For sale: Well-maintained CNC turning and milling center DMG Mori Seiki NLX 2500 SY/700, year of manufacture 2011, equipped with Mitsubishi 730 BM control system! Only approx. 9,000 machining hours! Traverse paths: X-axis: 260 mm Y-axis: 100 mm Z-axis: 795 mm Features and accessories: - Tool turret: 12 positions, all driven - Max. speed of driven tools: 10,000 rpm - Parts catcher - Electrical main connection: 400 V - Power consumption: 37.6 KVA - Internal coolant system Giedpoxzqhrefx Adtsl - Main spindle chuck: Kitagawa BB210AB - Sub spindle chuck: Kitagawa B206A521F - Turning diameter: 366 mm - Turning length: 705 mm - Hollow spindle: 80 mm - Main spindle max. speed: 4,000 rpm, with three-jaw chuck - Power: 18.5 kW - Sub spindle max. speed: 6,000 rpm, with three-jaw chuck - Chip conveyor - In-process tool measurement - Manually installable measuring arm for sub spindle - Short bar loader, manufacturer: LNS - Incl. tooling: 8 fixed tools, 3 driven tools - Incl. extraction system, make: Indusa - Including complete documentation Machine available immediately! Machine is fully cleaned and inspected! Loading by us! Transport can be organized upon request!

Kondisi: bekas, Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 540 mm, gerak cepat sumbu X: 24 m/menit, pergeseran cepat sumbu Y: 24 m/menit, pergerakan cepat sumbu Z: 20 m/menit, kecepatan pemakanan sumbu X: 16 m/menit, laju pemakanan gandar Y: 16 m/menit, laju pemakanan sumbu Z: 16 m/menit, daya nominal (semu): 16 kVA, produsen pengendali: Heidenhain, model controller: ITNC 530, beban meja: 800 kg, berat keseluruhan: 5.300 kg, kecepatan spindel (min.): 10.000 rpm, jam operasional spindle: 8.500 h, daya motor spindle: 12 W, hidung spindel: ISO B40, jumlah spindel: 1, jumlah slot dalam magazin alat: 24, tegangan masuk: 400 V, jenis arus masuk: tiga fasa, Perlengkapan: dokumentasi / manual, konveyor serpihan, Machine in very good condition and maintained by the manufacturer. Available immediately. Renishaw probe. Video available upon request. Gjdpfxswxrgto Adtoil Delivery and installation by our team possible.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Double-spindle CNC lathe with 2 spindles, 3 turrets, and 3 Y axes Each turret with 15 stations, BMT 44 Giodpfx Aevxu Easdtel Driven tools 2x C-axis 3x Y-axis Control: Fanuc 32i-TB Bar capacity: 65 mm Left spindle: 15/11 kW, Hainbuch Spanntop mini Axzug size 65 Right spindle: 11/7.5 kW, Kitagawa 3-jaw chuck Finished part gripper Conveyor belt Bar loader interface Coolant system, separate tank 200 l Cooling unit High pressure at turrets 1-3 via M-function 15 bar / 40 l/min 2x Brinkmann pumps Renishaw tool measurement for all turrets Tool monitoring for spindle and AGW Spindle flushing through the sub-spindle with high-pressure coolant, Deublin rotary union Hinged belt conveyor Transformer Available immediately