Sistem pengelasan ultrasonik

Telsonic/ Maschinenbau Raab TSP-3000-1P

Tahun pembuatan: 2022, Kondisi: hampir baru (bekas), Piovan dryer SIST. DEUM. GMP150+2xPTUN2000 COOLING SYSTEM Iajdpovhb S Sjfx Afier Like new, unused The PTUN... module is an individual drying unit for plastic material. The machine consists of the following components: • Hopper • Support frame • Heating chamber • Connecting pipes • Air control valves.

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 3.500 h, gaya penjepit: 120 kN, volume langkah: 36 cm³, tekanan injeksi: 2.200 batang, berat keseluruhan: 5.400 kg, diameter konveyor sekrup: 22 mm, Dasar Pengiriman: ex lokasi Iasdpsxwy Utofx Afijr Waktu Pengiriman: sesuai kesepakatan Syarat Pembayaran: 100% sebelum pengambilan mesin, bersih tanpa potongan

Kondisi: bekas, Tahun pembuatan: 2003, Dual-mode excavator designed for loosening spoil for stockpiling or for loading onto a transport vehicle. The machine is suitable for: - work on railway and tram tracks - track maintenance and trackside operations - earthworks and road construction Manufacturer: ATLAS Model: 1604 KZW Year of manufacture: 2003 Iaedpfxehutkfo Afier Operating weight: 22,000 kg Dimensions: 5.9 x 2.5 m, height: 3.0 m Engine power: 90 kW Equipment: - air conditioning - Webasto heater - triple-articulated boom - front and rear coupler - additional hydraulic line for a hydraulic breaker - reversing camera - four hydraulic outriggers - joystick control Technical condition: used, fully operational

Kondisi: baru, Dimensions (L x W x H): 1360 x 500 x 1970 mm Weight: 115 kg Number of drawers: 7 units Load capacity: 700 kg Professional workbench / tool trolley Dimensions of top drawers: 1240 x 400 x 100 mm Dimensions of middle drawers: 770 x 400 x 60 mm Cabinet compartment dimensions: 500 x 420 x 540 mm Tool wall dimensions: 1050 x 610 mm Dimensions of hanging cabinets (2 pcs.): 680 x 280 x 350 mm each 4 wheels, each 125 x 50 mm 4 x hangable storage bins, 10.5 x 14 x 7.5 cm 3 x hangable storage bins, 14 x 22 x 12 cm 2 x steel containers, 33 x 10 x 10 cm 2 x U-hooks, 55 x 25 x 6 mm, for tool wall 4 x double hooks, 85 x 6 mm, for tool wall 2 x universal hanging racks, 37 cm wide 2 x hanging racks for socket wrenches. Iedpfx Afeu Imfnjiear

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SÇ 521 PVC ÜÇLÜ SU TAHLİYE MAKİNESİ, • Possibility of opening water drainage channels in PVC profiles • Independent operation of three separate groups • Ability to operate the water drainage system in an angled position • Pneumatic profile clamping system Isdpfjra Nqtsx Afijar • Fully automatic operation system

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036946, gaya penjepit: 800 kN, diameter sekrup: 40 mm, volume langkah: 201 cm³, tekanan injeksi: 1.860 batang, berat injeksi: 183 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.850 mm, berat keseluruhan: 5.600 kg, kapasitas pemanasan: 11,5 kW (15,64 hp), jenis penggerak: Vollelektrisch, bentang bebas: 735 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The precisionMolding base injection moulding machine offers the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. This machine can be used in a wide variety of application areas such as packaging industry, electrical and electronics industry, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Fast delivery times through a base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL UNIT - MC P1 with 15” TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Tie bar spacing (h x v): mm 470 x 420 - Platen size (h x v): mm 610 x 560 - Min. – max. mould height: mm 150 – 400 - Opening stroke: mm 750 Iaedpeud H Dmofx Afier - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force forward/backward: kN 22 / 22 - Ejector speed forward/backward: mm/s 300 / 300 - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter/type: mm 40 / Standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Shot volume: cm³ 201 - Shot weight at max. stroke for PS: g 183 - Injection speed: mm/s 200 - Injection flow rate: cm³/s 251 - Screw drive/speed: rpm 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight with control cabinet: t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising unit - BluePower full insulation of plasticising cylinder - Open nozzle - Air valve 1-fold (BWAP) - Pneumatic control for hot runner shut-off 1-fold - Electrical cascade interface 4-fold - Euromap interface for handling E18, E63 - Euromap interface (central computer) E67, E77 - Water battery 4-fold - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression control - Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 200 h, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), daya laser: 700 W, daya: 3 kW (4,08 hp), Perlengkapan: unit pendingin, Continuous-wave fiber laser with 750 watts as a stand-alone system or for integration into machines and production lines. This water-cooled laser, due to its high output power, is particularly suitable for applications requiring substantial heat input to the workpiece, such as welding metals or plastics, cutting, material removal, or structuring. By optionally using a 2D galvanometer scanner, the laser beam can also be software-controlled and precisely guided over the workpiece. The laser can be modulated both digitally and analogously (for power control) and can be monitored and controlled via control software. The images show a setup with a galvo scanner. Optionally, the system can also be equipped with a welding head or a cutting head. By installing side panels and a front door with a laser safety window (all components included), laser class 1 can also be achieved. The working area is height-adjustable via an electrically controlled Z-axis. Iasdpsph U Anjfx Afior The laser system is prepared for integration into a higher-level system, but can also be used as a stand-alone solution. For integration, interfaces for interlock, emergency stop, external laser control, etc. are available. Individual components of the system can also be integrated into a customer’s installation as required. We are happy to support customers with consultation and based on their specifications. Some technical data: - Maximum optical output power: 700 watts - Wavelength: 1080 nm - Power consumption (without chiller): < 3,000 watts - Supply: single-phase; 230 VAC / 50 Hz - Analog modulation (usable for power adjustment, among other functions) - Digital modulation up to 20 kHz

Kondisi: bekas, Tahun pembuatan: 2014, jam operasional: 4.136 h, 2014 | Komatsu PC45MR-3 | Used Mini Excavator < 7t | 4,136 operating hours Iajdpfex Tiiuox Afijr 📍 Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 24,200 or Make an Offer. Payment upon delivery available for a low fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points – 61 approved ✅ 0 imperfect ℹ️ 4 issues ⚠️ 📌 Inspector's Comment: Very well-maintained machine, stick fully rebushed. New rubber tracks are available for purchase. 📄 Want to see the full inspection report, extra photos, or a video? Tip: The reference "39999 Equippo" is commonly used when searching for more details online. 💡 Why choose this machine and our service: ✔ Comprehensive professional inspection ✔ Jobsite delivery available ✔ Money-back guarantee ✔ Secure and flexible payment options 🔄 Considering other equipment? We provide practical tools and resources for all machine owners and operators – easily accessible on our platform.

Kondisi: bekas, Tahun pembuatan: 1993, nomor mesin/kendaraan: 9384, Case bender Orient CX, year 1993 – serial no. 9384/15344 Maximum working width: 500 mm Online video inspection possible via Skype We would be pleased to welcome you for a visit – further machines available in stock. Immediate availability – inspections possible Iaodpfeh Aydrex Afior In stock at Emskirchen / Nuremberg – machine can be tested on site

Tahun pembuatan: 1978, Kondisi: siap digunakan (bekas), Suitable for PVC films, working width: 940 mm, welding power: 42 kVA, welding area: 940 x 720 mm, throughput: 400 cycles/h, length: 8,000 mm. Iasdpfx Afsqu Ubuoijr