Mesin bubut tipe Swiss CNC

TORNOS DECO 10

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, This TORNOS DECO 2000-10 was manufactured in 1999. It is equipped with a drum-type bar feeder, an integrated hydraulic power unit, and supports both front and rear with a center height of 1100 mm. It features a movable spindle headstock, a directional spindle stop, and a cross slide with tool holders. This machine is ideal for precision turning operations and operates with AC drive motors and an absolute measuring system. Please contact us for further information on this machine. Additional Information • Maximum bar length: 3040 mm Dedpfx Abjx D D Ikjhokh • Electrical control cabinet • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable spindle headstock • Cross slide with 4 tool holders T11-T14 with vertical and horizontal movement • Absolute measuring system • 9 axes with C1 and C4 • Drum-type bar feeder "HYBRIDE 10+5" • 14 guide tubes for 1-4 mm bars • 14 guide tubes for 4.1-10 mm bars, without bar preparation up to 8 mm • Collet for Tryton • 2 different hybrid drums • Directional spindle stop S1 • Can be equipped with Robobar SSF 3 m bar feeder

Kondisi: bekas, x-travel 1050 mm y-travel 600 mm z-travel 600 mm Control: Fanuc Machine weight approx. 7200 kg 8000 rpm Tool holder: 24 Dksdpfxovnh Ume Abhoh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, produsen pengendali: FANUC, model controller: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It comes equipped with an integrated bar feeder with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine features a Robobar SSF 3m loading magazine and a FANUC 16i-TB control unit, ensuring precise and efficient operation. Ideally suited for complex Swiss-type turning applications. Contact us for further details about this machine. Additional information: • Maximum bar length: 3200 mm • Bar capacity: minimum 2 mm, maximum 10 mm • Maximum diameter without preparation: 8 mm (without collet) • Motor voltage: 400 V • Control voltage: 24 V • Independent sub-spindle (S4) • FANUC 16i-TB control • 1 cross slide with 4 tool holders • Tool breakage detection sensor • Center height: 1100 mm • Automatic and integrated oil bath bar loader • Robobar SSF 3m loading magazine • Front and rear support stands • "HYBRID 10+5" drum with 14 guiding holes for 1-4 mm and 14 guiding holes for bars 4.1-10 mm, no bar preparation needed up to 8 mm • Electrical control cabinet • Integrated 25-liter hydraulic unit with filter Dkjdex D Dliepfx Abhjh • Movable headstock • Programmable spindle stop. Optional: Comprehensive set of measuring instruments.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 37.578 h, en Dodpfx Aox D Dm Tobhskh

Kondisi: baik (bekas), Tahun pembuatan: 2008, Teile, die von Hand gezeigt werden, sind nicht enthalten. 12.000 U/min X 610 mm Y 420 mm Z 450 mm Dkodpfxjuc Tpge Abhsh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, This TORNOS DECO 10e was manufactured in 2007. It is a Swiss sliding headstock lathe featuring direction-dependent spindle stop and multiple tool holders for versatile operations. Includes an independent sub-spindle, lubrication system, and drum-type bar feeder. Ideal for precision turning operations with a bar capacity of 10 mm. Take the opportunity to acquire this Swiss lathe TORNOS DECO 10e. Contact us for further information. Additional Information: • Sliding headstock Dkjdpfex D Dmmex Abhoh • Direction-dependent spindle stop S1 • Cross-slide with 4 tool holders T11-T24, vertically and horizontally adjustable • Independent sub-spindle • Pivoting workpiece holder on the sub-spindle • Lubrication system for guide bushing with filter • 3 presettable turning tool holders • Motorization S2 • Collet threading device ESX 12 • 4 fixed tool holders • Drum-type bar feeder • Integrated 25-liter hydraulic unit with filter • Front and rear support foot, center height 1100 mm • "HYBRID 10+5" drum with 14 guide tubes for 1–4 mm bars and 14 guide tubes for 4.1–10 mm bars, allows processing of bars up to 8 mm diameter without preparation • Electrical switch cabinet • Motor voltage 400 V • Control voltage 24 V • Max. turning diameter 10 mm Optional: Comprehensive set of measuring devices.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, This Tornos DECO 10e was manufactured in 2010. It is a Swiss-made lathe featuring a sliding headstock, direction-dependent spindle stop, and an independent sub-spindle. The machine comes equipped with a drum-type bar loader and an integrated 25-liter hydraulic unit. This model is ideal for precision turning in small batches, supporting bar diameters from 1 to 10 mm, and up to 8 mm without prior preparation. Contact us for further information about this machine. Additional information: • Electrical control cabinet • Cross slide with 4 tool holders T11-T24, with vertical and horizontal movement • 3 presettable turning tool holders • 4 fixed tool holders • Thread cutting device for collet ESX 12 • Sliding headstock • Independent sub-spindle • Pivoting workpiece holder on the sub-spindle • Lubrication device for the guide bush with filter Dodpfx Abox D Dndjhjkh • Drum-type bar loader • Integrated 25-liter hydraulic aggregate with filter • Front and rear support feet, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, up to 8 mm without bar preparation • Motor voltage: 400 V • Control voltage: 24 V • Drive motor speed: 12,000 rpm Optional: Comprehensive package of measuring devices

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, 7 axes Control: FANUC 18i-TB Max. bar diameter: 16 mm (main spindle) Max. bar diameter: 16 mm (sub spindle) Dodpfxownd Dpe Abhskh Max. spindle stroke: 205 mm Max. spindle speed: 10,000 rpm Tools 5-position turning tool holder on linear slide 4-position drilling unit incl. drill holders (front/rear) 3 driven tools for cross machining on linear slide 4 tools incl. drill holders for rear-side machining

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, This TORNOS DECO 10a was manufactured in 2010. It features a movable spindle headstock, a direction-dependent spindle stop, and cross slides with tool holders. The machine is equipped with an independent sub-spindle, a swiveling workpiece holder, and a lubrication device. Additionally, it includes a bar feeder, an integrated hydraulic unit, and an electrical control cabinet. If you are looking for a high-quality lathe, you should consider the TORNOS DECO 10a we have available for sale. Please contact us for more information. Additional Information • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • 3 presettable turning tool holders • 4 fixed tool holders • Movable spindle headstock • Direction-dependent spindle stop S1 • Independent sub-spindle • Swiveling workpiece holder at the sub-spindle Djdpfxex D Dmts Abhskh • Lubrication device for guide bushing with filter • Thread cutting device for ESX 12 collet chuck • Drum-type bar feeder • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, no bar preparation required up to 8 mm • Electrical control cabinet • Motor voltage 400 V • Control voltage 24 V

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2410, Year 2001 with Fanuc Deco and 10 axes Fully checked and partially overhauled as per inspection report. Country of manufacture Switzerland Net weight 1,500 kg Customs tariff number 8458.11 20 Dimensions 1650x1050x1850 mm TECHNICAL SPECIFICATIONS (standard configuration) Headstock (Z1 axis) (+C axis optional) Maximum bar capacity dia. 10 mm Maximum part length, depending on guide bush type 60/90 mm Programmable spindle speed 0–16,000 rpm Programmed stop and index, increment 0.1° Maximum spindle power 1.1 (3.7) kW Tool post (X1/Y1) (X2/Y2) Number of tools on turret (2 slides; 2 x 2 axes) 2 x 4 Tool section 8 x 8 mm Number of cross drills/milling tools on turret 4 Programmable speed range 0–12,000 rpm End working attachment (X3/Y3) Max. number of end working tools 3 Programmable speed range 0–12,000 rpm Sub spindle and secondary operations (X4/Z4) (+C axis optional) Maximum clamping capacity 7 mm Programmable spindle speed 0–16,000 rpm Programmed stop and index; increment 0.1° Maximum number of secondary operations 4 Number of fixed or live spindles 4 Maximum spindle speed 9,000 rpm Dodpow T Tfrsfx Abhekh Specific Tornos-Bechler/Fanuc CNC CPU type 486 DX2 Number of simultaneous axes 10 Machine versions 9 axes + spindle C axis and/or sub-spindle C axis All technical details provided are subject to possible error or omission and are not binding.

Kondisi: bekas, Tahun pembuatan: 1995, Mesin Frais CNC Universal Produsen: HERMLE Tipe: UWF 902 S Tahun pembuatan: 1995 Jam operasi: 65.071 Kontrol: HEIDENHAIN TNC 426 Area kerja X/Y/Z: 600 x 450 x 500 mm Rentang kecepatan putar: 20 - 6.300 rpm Holder alat: SK 40 Probe 3D M & H (untuk pengukuran benda kerja) Perangkat milling vertikal-horizontal Quill bor Sistem pendingin Meja sudut: 900 x 458 Djdpfx Abjv Rxa Sehskh Berat: 4.000 kg Dimensi mesin P x L x T kira-kira: 3.900 x 2.000 x 2.000 mm ä3226

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, TORNOS DECO 10a ini diproduksi pada tahun 2003. Mesin ini dilengkapi kepala gerak, penghenti spindle dua arah, serta beberapa cross-slide dengan pemegang alat untuk pemesinan serbaguna. Dilengkapi kontra-spindle dan perangkat lunak pemrograman dalam lima bahasa, sangat cocok untuk pekerjaan bubut yang kompleks. Termasuk antarmuka untuk pemasuk batang dan deteksi patah alat. Silakan hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Djdpfxox D Dm Ho Abhokh Pembubutan

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 10 mm Dkedpfx Ajuhbadjbheh - Travel: 66 mm - Spindle speed: 16,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° TOOL HOLDER 1 - Number of positions: 4 TOOL HOLDER 2 - Number of positions: 4 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm FRONT TOOL POST - Number of positions: 3 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm SUBSEQUENT MACHINING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 9,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required space: 1,700 x 1,010 mm - Machine height: 2,000 mm - Machine weight: 1,500 kg EQUIPMENT - CNC control: Fanuc - Driven tool motorization at: S2, S3, S5 - Fixed guide bushing - Parts removal - Parts ejector - Coolant tank - Number of driven tool holders: 4 - Number of fixed tool holders: 5 - Number of turning tool holders: 6

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, en-GB: Universal Milling Machine Deckel FP2, repowered by FPS, year of manufacture 2013, with 3-axis digital readout Heidenhain ND 780 - As New Condition!! Technical Specifications: - Machine No.: 2202-7020, FPS No.: 3364, Year: 2013 - Fixed angle table - Spindle speed: 40 - 2,000 rpm - Feed and rapid traverse on 3 axes - Drive power: 2.2 kW - Travel X/Y/Z: 400 / 200 / 400 mm - Features: Vertical and horizontal spindle - Extendable vertical and horizontal quill - SK 40 - Drawbar system S20x2 - Weight approx. 1,100 kg Accessories and Equipment: - 3-axis digital readout Heidenhain ND 780 - Brake motor for immediate spindle stop - Centralised lubrication - 2 x emergency stop buttons - Operating manual Dkodpfx Abovbifgshjh - Coolant system About the machine: Offered here is a Universal Milling Machine Deckel FP2 repowered by FPS, in almost new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has automatic centralised lubrication, and for safety is fitted with two emergency stop switches. Status as of 2013. Mechanically and electrically tested. The Heidenhain digital readout makes machining easier and even more precise. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.