Mesin bubut batang otomatis

TORNOS Deco 10

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 37.578 h, Diameter batang (maks.): 8 mm, jumlah sumbu: 9, en Fjdey S Aq Ajpfx Airegc

Kondisi: bekas, Tahun pembuatan: 1998, Technical Details: Swing diameter: 830 mm Turning length: 4,000 mm Swing diameter over cross slide: 540 mm Spindle bore: 130 mm Speed range: 2 – 1,600 rpm Rapid traverse speed: 4 / 5 m/min Feed speed: 1 – 2,000 mm/min Total power requirement: 55 kW Machine weight approx.: 7.5 t Floor space required approx.: 7 x 2.2 x 2 m Fgedpfxowwlt Re Airjc Equipped with R&D MTC-K cycle control MULTIFIX tool post, size D Coolant system

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, produsen pengendali: FANUC, model controller: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity of 2 to 10 mm. The machine is equipped with a Robobar SSF 3m magazine loader and a FANUC 16i-TB control unit, ensuring precise and efficient operation. Ideally suited for complex Swiss-type turning operations. Contact us for more details about this machine. 2 similar machines available! Additional information: • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Maximum diameter without preparation: 8 mm (without collet) • Motor voltage: 400 V • Control voltage: 24 V • Independent sub-spindle (S4) • FANUC 16i-TB control • 1 cross slide with 4 tool holders • Tool breakage detection sensor • Center height: 1100 mm • Automatic and integrated oil-bath bar loader • Robobar SSF 3m magazine loader • Front and rear support feet Fgedoy S Aqiopfx Airjc • "HYBRID 10+5" drum with 14 guide holes for 1-4 mm and 14 guide holes for bars 4.1-10 mm without bar preparation up to 8 mm • Electrical control cabinet • Integrated 25-liter hydraulic unit with filter • Movable headstock • Oriented spindle stop Optional: Extensive set of measuring devices

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 10 mm - Travel: 66 mm - Spindle speed: 16,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° BUSH HOLDER 1 - Number of positions: 4 BUSH HOLDER 2 - Number of positions: 4 - Number of powered positions: 3 - Driven tool speed: 12,000 rpm FRONT ATTACHMENT - Number of positions: 3 - Number of powered positions: 3 - Driven tool speed: 12,000 rpm SUB MACHINING - Number of positions: 4 - Number of powered positions: 4 - Driven tool speed: 9,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 1,700 x 1,010 mm - Machine height: 2,000 mm - Machine weight: 1,500 kg EQUIPMENT - Control: Fanuc - Driven tool motorization at: S2, S3, S5 - Powered guide bushing - Parts ejector - Coolant tank Fgodpfx Asy Aprnoirec - Bar feeder: LNS TRYTON

Kondisi: bekas, en-TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Travel: 205 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 1° TOOL HOLDER 1 - Number of positions: 10 - Number of driven positions: 4 - Driven tool speed: 8,000 rpm SUB OPERATIONS - Number of positions: 5 - Number of driven positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS Fgodpfx Aouwd Ryjiroc - Required space: 2,269 x 1,160 mm - Machine height: 1,693 mm - Machine weight: 1,800 kg EQUIPMENT - Control system: Mitsubishi MELDAS - Powered guide bushing - Parts removal - Parts ejector - Coolant tank - Bar feeder: LNS Hydrobar Express 332 - Fire extinguishing system * NB: Operational functionality not guaranteed. Please have checked by a qualified company of the buyer.

Kondisi: bekas, en-20240616-01 Fodoy Aprhspfx Airjgc

Kondisi: bekas, en-001 Fjdpfx Aoy Aprbjiregc

Kondisi: baik (bekas), Tahun pembuatan: 1995, nomor mesin/kendaraan: 0540/98, Fungsionalitas: berfungsi sepenuhnya, Fertigungsnummer: 0540/98. Baujahr: 1998. Presskraft: 400 Tonnen. Hubweg: 300 mm. Hubzahl: 10–40 / min. Stößelverstellung: 300 mm. Einbauhöhe: 700 mm. Tischabmessungen: 1600 x 1300 mm. Eigengewicht: 45 Tonnen. Ständerdurchgang: 1600 mm. Außenmaße: 2 x 3 x 6 Meter. Steuerung: MEAB. Fsdpjicbbzsfx Airegc Walzenricht- und Zufuhrgerät: iRON RNE 50B / 11. Abwickelhaspel: iRON SA6000, max. Bandbreite 700 mm.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It is equipped with a drum-type bar loader, an integrated hydraulic unit, and supports both at the front and rear with a center height of 1100 mm. The machine features a movable headstock, a directional spindle stop, and a cross slide with tool holders. It is ideally suited for precision turning operations and operates with AC drive motors and an absolute measurement system. Contact us for further information regarding this machine. Overhauled in 2017, with two additional similar machines available (both overhauled in 2018) 2017 Overhaul Details: Standard overhaul package: Block III maintenance, cleaning, and recommissioning. Overhaul of the guide bushing and overhaul of spindles S1, S2, and S4. Replacement of all ball screws, including bearings, and the guides on all axes. Replacement of coolant pump, all coolant lines, and the coolant sensor. Replacement of wipers on the cross slides. Replacement of all pneumatic lines and valves. Replacement of machine lighting, viewing panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). New central lubricating system installed. Replacement of bellows coupling, external encoders, and monitor. Replacement of the control and amplifier fans. Upon recommissioning, the 'Spindle Positioning S4' option was also activated and the bar loader was set up. Fsdpfx Ajx D D Ikeiregc Additional Information • Maximum bar length: 3040 mm • Electrical control cabinet • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14, with vertical and horizontal movement • Absolute measurement system • 9 axes with C1 and C4 • Drum bar loader 'HYBRIDE 10+5' • 14 guide tubes for 1–4 mm bars • 14 guide tubes for 4.1–10 mm bars, without bar preparation up to 8 mm • Tryton collet • 2 different hybrid drums • Direction-dependent spindle stop S1 • Can be equipped with Robobar SSF 3 m bar loader Technical Specification Counter spindle: Yes

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 10 mm - Travel: 66 mm Fedpfx Aieuhbakorsgc - Spindle speed: 16,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° TOOL HOLDER 1 - Number of positions: 4 TOOL HOLDER 2 - Number of positions: 4 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm FRONT TOOL POST - Number of positions: 3 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm SUB TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 9,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 1700 x 1010 mm - Machine height: 2000 mm - Machine weight: 1,500 kg MACHINE HOURS - Power-on hours: 89,897 h ACCESSORIES - Control: Fanuc - Driven tool motorization on: S2, S3, S5 - Driven guide bushing - Parts removal - Parts ejector - Coolant tank - Number of driven tool holders: 4 - Number of fixed tool holders: 6 - Number of turning tool holders: 7

Kondisi: baru, Tahun pembuatan: 2025, diameter putar di atas sled silang: 250 mm, panjang pembubutan: 730 mm, diameter pembubutan: 500 mm, kecepatan spindel (maks.): 1.800 rpm, de Fgodpfx Aiexdmgvjrec

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 10 mm - Travel: 66 mm - Spindle speed: 16,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° TOOL HOLDER 1 - Number of positions: 4 TOOL HOLDER 2 - Number of positions: 4 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm Fjdpfjuhbadox Airsgc FRONT TOOL POST - Number of positions: 3 - Number of driven positions: 3 - Driven tool speed: 12,000 rpm SUBSEQUENT MACHINING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 9,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required space: 1,700 x 1,010 mm - Machine height: 2,000 mm - Machine weight: 1,500 kg EQUIPMENT - CNC control: Fanuc - Driven tool motorization at: S2, S3, S5 - Fixed guide bushing - Parts removal - Parts ejector - Coolant tank - Number of driven tool holders: 4 - Number of fixed tool holders: 5 - Number of turning tool holders: 6