TORNOS DECO 10e

TORNOS DECO 10e

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Diameter batang (maks.): 10 mm, jumlah sumbu: 7, This Tornos DECO 10e was manufactured in 2010. It is a Swiss sliding headstock lathe featuring a direction-dependent spindle stop and an independent sub-spindle. The machine comes equipped with a drum-type bar feeder and an integrated 25-liter hydraulic unit. Designed for precise turning operations in small batch production, it supports bar diameters from 1 to 10 mm, with processing up to 8 mm possible without bar end preparation. Please contact us for further information regarding this machine. Giedpfox D Dndjx Ah Dep Additional Information • Electrical control cabinet • Cross slide with 4 tool holders (T11–T24) with vertical and horizontal movement • 3 preset turning tool holders • 4 fixed tool holders • Thread cutting device for ESX 12 collet • Sliding headstock • Independent sub-spindle • Swivelling workpiece holder on sub-spindle • Lubrication device for guide bushing with filter • Drum-type bar feeder • Integrated 25-liter hydraulic power unit with filter • Front and rear support pedestal, center height 1100 mm • "HYBRID 10+5" drum with 14 guide tubes for 1–4 mm bars and 14 guide tubes for 4.1–10 mm bars, allowing up to 8 mm without bar end preparation • Motor voltage 400 V • Control voltage 24 V • Spindle drive motor speed n = 12,000 rpm Optional: Comprehensive measuring equipment package Technical Specification Counter Spindle: Yes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Max. workpiece diameter: 25 mm, max. workpiece length: 100 mm, max. bar diameter: 25 mm, max. travel X/Z: 42 mm/50 mm, rapid traverse: 40 m/min, number of spindles: 6, spindle speed: 12,000 rpm, control: Siemens 840D Powerline. Gedpfxetqfq Us Ah Doip

Kondisi: baik (bekas), Multispindle automatic lathe Tornos SAS 16 6.6 Condition: Very good Gsdpfx Aowh Snveh Djip Machine description: Automatic lathe with sliding headstock Manufacturer: Tornos Model: SAS 16 6.6 Condition: good (used) 2 pieces Tornos SAS 16 6.6 automatic lathes including 1 machine with NC slide

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7/5.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 / 5.5 kW - Minimum C-axis resolution: 0.001° - Number of turret heads: 1 LOWER TURRET HEAD - Number of positions: 12 - Travel X/Z: 90 x 65 mm - Travel Y: 50 mm - Number of bush holders: 2 BUSH HOLDER 1 - Number of positions: 10 - Number of driven positions: 4 - Travel X/Y: 90 / 319 mm FRONT UNIT Gedpfx Ahouhbdie Doip - Number of positions: 12 - Travel X/Z: 215 x 305 mm ELECTRICAL SUPPLY - Supply voltage: 400 V DIMENSIONS AND WEIGHT - Space requirement: 2000 x 1280 mm - Machine height: 1720 mm - Machine weight: 3,600 kg MACHINE HOURS - Power-on hours: 23,167 h EQUIPMENT - Control: Fanuc 31i-B - Interface: Ethernet / RS232 / USB / PCMCIA - 3-color status lamp - Driven guide bushing - Parts catcher - Parts ejector - Coolant tank - Bar feeder: Iemca Elite 220 (2010) - Fire extinguishing system * NB: Functionality not guaranteed. To be checked by a qualified company appointed by the buyer.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2410, Year 2001 with Fanuc Deco and 10 axes Fully checked and partially overhauled as per inspection report. Country of manufacture Switzerland Net weight 1,500 kg Customs tariff number 8458.11 20 Dimensions 1650x1050x1850 mm TECHNICAL SPECIFICATIONS (standard configuration) Headstock (Z1 axis) (+C axis optional) Maximum bar capacity dia. 10 mm Maximum part length, depending on guide bush type 60/90 mm Programmable spindle speed 0–16,000 rpm Programmed stop and index, increment 0.1° Maximum spindle power 1.1 (3.7) kW Tool post (X1/Y1) (X2/Y2) Number of tools on turret (2 slides; 2 x 2 axes) 2 x 4 Tool section 8 x 8 mm Number of cross drills/milling tools on turret 4 Programmable speed range 0–12,000 rpm End working attachment (X3/Y3) Max. number of end working tools 3 Programmable speed range 0–12,000 rpm Sub spindle and secondary operations (X4/Z4) (+C axis optional) Maximum clamping capacity 7 mm Gisdpfow T Tfrox Ah Dep Programmable spindle speed 0–16,000 rpm Programmed stop and index; increment 0.1° Maximum number of secondary operations 4 Number of fixed or live spindles 4 Maximum spindle speed 9,000 rpm Specific Tornos-Bechler/Fanuc CNC CPU type 486 DX2 Number of simultaneous axes 10 Machine versions 9 axes + spindle C axis and/or sub-spindle C axis All technical details provided are subject to possible error or omission and are not binding.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, produsen pengendali: FANUC, model controller: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity of 2 to 10 mm. The machine is equipped with a Robobar SSF 3m magazine loader and a FANUC 16i-TB control unit, ensuring precise and efficient operation. Ideally suited for complex Swiss-type turning operations. Contact us for more details about this machine. 2 similar machines available! Additional information: • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm Giodpfx Ahjx D Dlio Dsp • Maximum diameter without preparation: 8 mm (without collet) • Motor voltage: 400 V • Control voltage: 24 V • Independent sub-spindle (S4) • FANUC 16i-TB control • 1 cross slide with 4 tool holders • Tool breakage detection sensor • Center height: 1100 mm • Automatic and integrated oil-bath bar loader • Robobar SSF 3m magazine loader • Front and rear support feet • "HYBRID 10+5" drum with 14 guide holes for 1-4 mm and 14 guide holes for bars 4.1-10 mm without bar preparation up to 8 mm • Electrical control cabinet • Integrated 25-liter hydraulic unit with filter • Movable headstock • Oriented spindle stop Optional: Extensive set of measuring devices

Kondisi: bekas, TECHNICAL SPECIFICATIONS - Number of spindles: 6 - Max. bar diameter: 20 mm; 25 mm optional - Number of cross slides: 4 - Max. feed length: 100 mm - Spindle speed: 420 - 5000 rpm - Indexing time: 0.7 s Gjdpfx Ahouharrs Doip - Machining time: 1.4 - 60 s - Power: 11 kW - Dimensions: 5800 x 1500 mm - Weight: 6000 kg EQUIPMENT - 4 cross slides, positions 1, 2, 4, 5 - 1 chip conveyor - 5 drills - 1 bar loader IEMCA PRA41/31/P

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Produsen: TORNOS Tipe: DECO 2000/07 Tahun: 1996 No. Mesin: T 62136 Negara: Swiss Spesifikasi: Giodpsxq D Svofx Ah Dop Maks. kapasitas di collet: 7 mm Kontrol: FANUC 16 T-B Penghitung jam, mesin aktif: 24.095 jam Dilengkapi dengan: Perangkat penjepit collet Majalah pengisi batang Sumbu C penuh Penjepit benda kerja Pemegang alat Sistem pendingin Kunci operator, dll.

Kondisi: baik (bekas), Tahun pembuatan: 2006, CNC Swiss-Type Automatic Lathe Citizen Cincom M16 Technical Data Year of manufacture: 2006 Max. machining diameter: ø16 mm Max. machining length: 200 mm per chucking Max. diameter for frontal drilling: ø6 mm Max. diameter for frontal thread cutting: M6 Main spindle bore diameter: ø16 mm Main spindle speed: 200 to 10,000 rpm C-axis main spindle: 0.001° Max. collet diameter sub spindle: ø16 mm Max. backworking length: 125 mm Max. part overhang sub spindle: 25 mm Max. drilling diameter on backworking: ø5 mm Max. thread cutting diameter on backworking: M5 Sub spindle speed: 200 to 10,000 rpm Tool holder group: max. drilling diameter ø5 mm max. thread cutting diameter M4 Spindle speed: 200 to 8,000 rpm Turret: max. drilling diameter ø5 mm max. thread cutting diameter M5 Spindle speed: 200 to 6,500 rpm Number of mountable tools: up to 21+α Axis traverse rates: 20 m/min Minimum input increment: 0.001 mm Axis travels: X1 60.5 mm Gsdpfx Aex Emnrjh Doip Y1 208 mm Z1 205 mm X2 107.5 mm Z2 133 mm X3 195 mm Z3 280 mm Main spindle drive power 2.2 kW Sub spindle drive power 0.75 kW Driven tool spindle power: 0.75 kW Description: The Citizen Cincom M16 is a high-precision CNC Swiss-type automatic lathe designed for demanding series production of small and precision parts. With a machining diameter of up to ø16 mm, a machining length of up to 200 mm, and high spindle speeds up to 10,000 rpm, the machine is ideally suited for complex machining tasks. The integrated C-axis on the main and sub spindles allows for precise positioning as well as sophisticated milling and drilling operations. The machine offers extensive tooling capacity with up to 21 tools and multiple driven tool stations, enabling even complex machining processes to be performed in a single setup. Generous axis travels and precise feed increments of 0.001 mm ensure top manufacturing quality with minimal tolerances. Scope of delivery includes an LNS Express-220 bar feeder from 2011, which enables automated material loading, significantly increasing productivity and process reliability. A variety of tool holders are also included in the package. The machine is robustly constructed and designed for continuous industrial use—ideal for producing watch, medical, electronics, or automotive components. No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Diameter batang (maks.): 10 mm, jumlah sumbu: 9, This TORNOS DECO 10a was manufactured in 2010. It features a sliding headstock, direction-dependent spindle stop, and cross slides equipped with tool holders. The machine is equipped with an independent counter spindle, a swiveling workpiece holder, and a lubrication system. Additional equipment includes a bar feeder, an integrated hydraulic unit, and an electrical control cabinet. If you are looking for a high-quality lathe, the TORNOS DECO 10a we are offering for sale is an excellent choice. Please contact us for further information. Gijdjx D Dmtepfx Ah Dep Additional Information: • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • 3 presettable turning tool holders • 4 stationary tool holders • Sliding headstock • Direction-dependent spindle stop S1 • Independent counter spindle • Swiveling workpiece holder at the counter spindle • Lubrication device for guide bushings with filter • Thread cutting device for collet chuck ESX 12 • Drum-type bar feeder • Integrated 25-liter hydraulic unit with filter • Support foot front/rear, center height 1100 mm • "HYBRID 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, no bar preparation required up to 8 mm • Electrical control cabinet • Motor voltage 400 V • Control voltage 24 V Optional: Comprehensive gauge package Technical Specification: Counter Spindle: Yes