CNC lathe

TRAUB TNC 42 DG

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Okuma GENOS L200E-MY CNC Lathe Technical Data Manufacturer: Okuma Model: GENOS L200E-MY Control: OSP-P300L-R Voltage: 400 V Phases: 3 P Frequency: 50/60 Hz Connected Load: 15.3 kVA Rated Current: 25.6 A Short-Circuit Resistance: 2.5 kA Max. Turning Diameter: Ø 200 mm Max. Turning Diameter x Length: Ø 200 x 380 mm Swing Over Bed: Ø 450 mm Swing Over Cross Slide: Ø 300 mm Workpiece Weight (one-sided support): 120 kg Spindle Diameter: Ø 100 mm Spindle Nose: JIS A2-6 Spindle Bore: Ø 66 mm Spindle Speed Range: stepless Spindle Speed: 75 to 3000 rpm Number of Tool Stations: 12 Turret Type: Multitasking V12 Turret Tool Mounting External Turning Tools: 20 x 20 mm Djdpfey R A N Ajx Aavjcp Tool Mounting Internal Turning Tools: Ø 32 mm Driven Tool Speed: 6000 rpm Travel Distance Z-Axis: 400 mm Travel Distance X-Axis: 165 mm Travel Distance Y-Axis: 80 mm Feed Rate Range: 0.001 to 1000 mm/rev Rapid Traverse Z-Axis: 25000 mm/min Rapid Traverse X-Axis: 20000 mm/min Rapid Traverse Y-Axis: 10000 mm/min Tailstock Quill Diameter: Ø 55 mm Tailstock Quill Stroke: 80 mm Machine Height: 2040 mm Installation Area: 2120 x 1750 mm Machine Weight: 4800 kg Year of Manufacture: 2015 No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Kondisi: bekas, Tahun pembuatan: 1999, jam operasional: 65.090 h, Fungsionalitas: berfungsi sepenuhnya, ET365 GS dengan loader batang dan konveyor serpihan Dcodjycvaqspfx Aavep Mesin ini dilengkapi sepenuhnya - Nampan penampung - Pompa tekanan tinggi - Pendingin lemari kontrol listrik - Loader Kupa - Mesin dibeli dari operasi berjalan dan telah diperiksa secara teknis - Geometri telah diukur dan semua telah disetel - Suku cadang aus telah diganti - Semua fungsi telah dicek dan disetel Mesin sepenuhnya berfungsi dan siap langsung untuk produksi Mesin tersedia segera

Kondisi: bekas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle head strokes (fixed/driven guide bushing): 130/80 [mm] Dcsdpfx Aasuhav Djvop - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of live tool positions on the turret: 6 - Max. diameter at subspindle: 12.7 [mm] - Subspindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and subspindle - Brake for main spindle and subspindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various static and driven tool holders

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), de-20240622-01 Dcodsxg Rhvjpfx Aavjp

Kondisi: bekas, Tahun pembuatan: 2004, Technical details: x-travel: 600 mm y-travel: 700 mm z-travel: 60 mm Tool holder: SK40 Djdsw Dud Sopfx Aavocp Magazine positions: 30 pcs Table clamping surface: 630 mm Machine type: 5-axis CNC milling machine Manufacturer: DMG Model: DMU 60 P

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 9 - Number of turrets: 2 MAIN SPINDLE - Spindle drive power: 6.7 / 10.7 [kW] - Spindle speed: 8,000 [rpm] - Max. bar diameter: 32 [mm] - Travel Z: 305 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle drive power: 3.7 / 5.5 [kW] - Spindle speed: 6,400 [rpm] - Max. bar diameter: 30 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel X: 140 [mm] - Travel Z: 300 [mm] TURRET 1 - Number of positions: 10 - Number of live positions: 10 - Live tool speed: 12,000 [rpm] Dedeypxqrepfx Aavscp - Live tool power: 3.4 [kW] - Travel X/Z: 140/300 [mm] - Travel Y: -40/+25 [mm] TURRET 2 - Number of positions: 10 - Number of live positions: 10 - Live tool speed: 12,000 [rpm] - Live tool power: 3.4 [kW] - Travel X/Z: 140/320 [mm] - Travel Y: -25/+40 [mm] ELECTRICAL SUPPLY - Total connected load: 28 [kW] WEIGHT AND DIMENSIONS - Footprint: 3,870 x 1,670 [mm] - Machine height: 2,500 [mm] - Machine weight: 6,000 [kg] MACHINE HOURS - Powered hours: 23,240 [h] - Operating hours: 19,500 [h] EQUIPMENT - Control: Traub TX 8i-p - 3-color status lamp - Coolant tank: 500 [l] * with high-pressure pump: 3, 8, 20 [bar] * with paper filter - Chip conveyor - Parts catcher - Parts conveyor belt - Bar feeder interface

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2016, jam operasional: 90 h, Fungsionalitas: fungsi terbatas, jenis bahan bakar: diesel, daya: 44 kW (59,82 hp), daya nominal: 44 kW (59,82 hp), daya kontinu: 44 kW (59,82 hp), daya semu kontinu: 55 kVA, For sale: Diesel generator ETT-55E (55 kVA) Condition: Used. The cooling pump is not functioning; oil is entering the engine and the oil pump needs replacement. Otherwise, technically in good condition. Start-up is possible. New fuel pump included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous operation in industrial or construction environments. Technical specifications: Model: ETT-55E Operating hours: 90 h Power (Standby): 55 kVA / 44 kW Power (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Generator (alternator): WHI224D, brushless, with automatic voltage regulation (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Control and equipment: Dsdpjxlngaefx Aavjcp Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switchboard – for mains/generator control Protection against overvoltage, overload, and low oil pressure Soundproof enclosure – reduced noise level Manual or automatic operation modes Application: The generator is suitable for: • Industrial enterprises, warehouses, and production facilities • Construction sites and mobile workstations • Backup power supply for hotels, hospitals, office buildings, or farms A reliable solution when a stable, uninterrupted power supply is required. If you have any further questions, we will be happy to assist.

Kondisi: bekas, Tahun pembuatan: 1961, de2c1c73 Dedpewwl I Ijfx Aavscp

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 23.532 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 550 mm, daya motor spindle: 31.500 W, kecepatan spindel (maks.): 6.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 110 mm, jarak lintasan sumbu Y: 100 mm, jarak gerak sumbu Z: 320 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 50 m/menit, kecepatan rotasi (maks.): 6.000 rpm, jenis arus masuk: tiga fasa, torsi: 170 Nm, saluran batang: 65 mm, tinggi total: 2.490 mm, panjang total: 6.910 mm, diameter luar chuck: 160 mm, lebar total: 2.092 mm, Diameter batang (maks.): 65 mm, hidung spindel: 140, berat keseluruhan: 9.000 kg, gaya umpan sumbu X: 5.000 N, gaya umpan sumbu Y: 5.000 N, gaya makan sumbu Z: 5.000 N, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Dijual sebuah mesin bubut CNC INDEX C200, tahun pembuatan 2018, dari inventaris mesin kami sendiri. Mesin ini berfungsi penuh dan dapat diperiksa serta didemonstrasikan dalam kondisi beroperasi di lokasi kami. C200 dilengkapi dengan fitur lengkap yang meliputi spindel utama dan spindel kontra, tiga dudukan perkakas, serta perkakas yang digerakkan, dan sangat cocok untuk produksi massal yang efisien dari komponen bubut presisi yang kompleks. Data Teknis / Fitur: - Produsen: INDEX - Model: C200 - Tahun Pembuatan: 2018 - Pengontrol: INDEX C200-si berbasis Siemens Sinumerik 840D SolutionLine - Spindel Utama D65 - Spindel Kontra D65 - Diameter benda kerja: maks. 65 mm - Kecepatan spindel utama: maks. 6.000 RPM - Kecepatan spindel kontra: maks. 6.000 RPM - 3 dudukan perkakas - 14 stasiun per dudukan perkakas - Perkakas yang digerakkan - Sumbu Y pada dudukan perkakas 1 dan 2 - Sumbu C pada spindel utama dan spindel kontra - Sistem suplai pendingin bertekanan tinggi - Konveyor serpihan - Sistem pembuangan benda kerja / perangkat pengambilan portal - Antarmuka untuk magasin pemuat batang UNIMAG4 - Antarmuka pengguna iXpanel - Koneksi: 400 V / 50 Hz - Daya terukur: 54 kW - Daya sambungan: 65 kVA - Arus terukur: 94 A Dsdpjz Hmxnsfx Aavscp - Sekering maksimum: 100 A Fitur dengan tiga dudukan perkakas, spindel utama dan spindel kontra, serta teknologi otomatisasi dan periferal yang ada, memungkinkan pemrosesan lengkap yang fleksibel dan produktif dari komponen massal. Konfigurasi teknis didokumentasikan dalam konfirmasi pesanan INDEX asli. 20260930101605 Jam operasi saat ini menurut pengontrol mesin: - Waktu operasi: sekitar 23.532 jam - Sistem hidrolik: sekitar 22.288 jam - Waktu operasi spindel / penggerak menurut penghitung jam operasi: - S1: sekitar 2.298 jam - S2: sekitar 4.189 jam - S3: sekitar 1.954 jam - S4: sekitar 5.998 jam - S5: sekitar 8.006 jam Saat ini, mesin tersebut berada di pabrik kami dan dapat diperiksa serta didemonstrasikan dalam kondisi beroperasi setelah perjanjian sebelumnya. Gambar detail tambahan, dokumen teknis, serta penawaran resmi dengan daftar fitur lengkap akan kami sediakan dengan senang hati jika ada minat yang konkret.

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), Base machine CTX 200E with driven tools, C-axis, and 1x sub-spindle machining. Includes DATAPILOT software package TurnPlus, control cabinet cooling unit, hinged belt chip conveyor, discharge height: 1100 mm including coolant tank, set of tool holders for the universal disc turret with tool holders for external machining, boring bar holders, tools with cylindrical shank interface, sealing plugs, reduction sleeves. Complete axial bar gripper, workpiece pick-up unit, 3x axial tool spindles for drilling/milling/tapping, 1x radial spindle for drilling/milling/tapping, 1x for saw blades, complete collet chuck for main spindle, complete collet chuck for sub-spindle, 17x round DIN collets 173E, Ø 3–40 mm, 2x hex DIN collets 173E, SW 7 and 12 mm, 2x square DIN collets 173E, SW 8 mm. Bar feeder magazine IEMCA BOSS 542/32, guide channel set LW 13, additionally for IEMCA BOSS 542, 13x guide jaws for bar feeder IEMCA BOSS 542/32, Ø 8–41 mm. Complete documentation included. The machine has been idle for one year as the turret head is missing; no further defects known, operating hours unknown, no maintenance records available. Includes bar loader and numerous tools. Dcodew Tl Ifepfx Aavjp