Mesin bubut CNC

Traub TND 400

Kondisi: bekas, CNC lathe TRAUB Type TND 400 Serial No. 708 Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swing diameter over bed max. 470 mm Spindle bore in draw tube: 65 mm Spindle drive motor power: 22 kW Total power requirement: 35 kW Power supply: 380 Volt, 50 Hz - Electronic handwheel - RS 232 data interface - Disc turret with 12 tool stations VDI 40 - incl. 8 tool holders VDI 40 - 3-jaw power chuck Ø 225 mm SMW Autoblok, Type KNCS-N- Ø 225-65 plus a large assortment of chuck jaws - Hydraulic hollow clamping cylinder SMW, Type ZHDAS-130-67 - Chip conveyor KNOLL, Type 200 S-1/600 - Coolant system - Adjacent hydraulic power unit (L x W x H 650 x 500 x 1000 mm) Required floor space L x W x H: 4800 x 2000 x 2100 mm Main machine footprint L x W x H: 3500 x 2000 x 2100 mm Chip conveyor footprint L x W x H: 4500 x 700 x 1550 mm Weight approx. 5 tons Good condition Machine is ready for demonstration. The hollow clamping cylinder for workpiece clamping needs to be repaired. Ibodpozacwdefx Ahyjc

Kondisi: bekas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle head strokes (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] Ibjdpfx Ahouhav Doyjc - Upper turret: 6 positions - Lower turret: 6 positions - Number of live tool positions on the turret: 6 - Max. diameter at subspindle: 12.7 [mm] - Subspindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and subspindle - Brake for main spindle and subspindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various static and driven tool holders

Kondisi: siap digunakan (bekas), traub-tnd-400-de Ijdpsykutxsfx Ahyebc

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), de-001 Ibsdpey Tx Rzofx Ahyec

Kondisi: bekas, Tahun pembuatan: 2005, Turning diameter 275 mm Turning length 900 mm Control system: TRAUB TX8i Spindle bore 65 mm Drive power 100% duty cycle: 25.20 kW Drive power 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds – stepless: 1 – 5,000 rpm Spindle diameter (front bearing): 110 mm C-axis: 1 – 500 rpm Tool turret No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Ijdpfxew E Nnbe Ahyebc Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool turret No. 2 / No. 3 / No. 4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Tool turret – number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 – 6,000 rpm Drive power 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar feeder DNH61 / 3000 Bar lengths: 1,000 – 3,200 mm Bar diameter: 18 – 63 mm Max. hexagon across flats: 45 mm Total power requirement: 95.00 kW Machine weight approx. 16.00 t Space required approx. 10.00 x 3.50 x H3.00 m Equipped with control system TRAUB TX 8i, main and counter spindle with C-axis, 3 pcs. turret tool holders, 1 pc. vertical tool holder with B-axis, extraction system, chip conveyor, coolant system with coalescence separator. Bar loader TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various tool holders, non-driven 6 pcs. various driven tool holders Spare parts package Machine can be inspected under power.

Kondisi: bekas, Tahun pembuatan: 1992, translation_01 Ibjdjyuqiwepfx Ahyjc

Kondisi: bekas, Tahun pembuatan: 2011, produsen pengendali: Mitsubishi, model controller: TX8i-s, _____ Ijdpfx Aszr Dd Uohyebc Deskripsi: Spindel utama: Teknologi: Spindel motor Kecepatan putar: 5.000 RPM Daya: 22,6 kW Torsi: 180 Nm Diameter lubang batang: 65 mm Pegang benda kerja: Collet chuck, Hainbuch Spanntop Kombi Axfix Ukuran 65 Spindel penyeimbang: Teknologi: Spindel motor Kecepatan putar: 5.000 RPM Daya: 22,6 kW Torsi: 180 Nm Pegang benda kerja: Collet chuck, Hainbuch Spanntop Kombi Axfix Ukuran 65 Pengeluaran: Hidraulik dengan pembilasan Pembawa alat I (X/Y/Z): Teknologi: Turret dengan 10 stasiun Pegang alat: VDI30 Penggerak alat: 6.000 RPM, 5,5 kW, 17,5 Nm Jarak perjalanan di X/Y/Z: 175/80/650 mm Kecepatan cepat di X/Y/Z: 20/20/40 m/menit Pembawa alat II (X/Y/Z): Teknologi: Turret dengan 10 stasiun Pegang alat: VDI30 Penggerak alat: 6.000 RPM, 5,5 kW, 17,5 Nm Jarak perjalanan di X/Y/Z: 175/80/650 mm Kecepatan cepat di X/Y/Z: 20/20/40 m/menit Pembawa alat III (X/Y/Z): Teknologi: Turret dengan 10 stasiun Pegang alat: VDI30 Penggerak alat: 6.000 RPM, 5,5 kW, 17,5 Nm Jarak perjalanan di X/Y/Z: 175/80/650 mm Kecepatan cepat di X/Y/Z: 20/20/40 m/menit Peralatan/Aksesori: Pengelolaan serpihan: Konveyor serpihan Pengelolaan cairan pendingin: Sistem IKZ dengan filter pita kertas dan tekanan tinggi, 80 bar Pengaturan suhu cairan pendingin: Persiapan untuk pendingin eksternal, Deltatherm Pengumpanan bahan baku: Pengumpan batang pendek, FMB SL 80S Pengeluaran produk jadi: Sistem pengambilan portal (dikendalikan NC) dengan ban berjalan Penyedot kabut oli: Pemisah elektrostatik, LTA AC3001 Aksesori lainnya: Berbagai alat penahan alat yang digunakan

Kondisi: baik (bekas), Werkzeughalter VDI 30 Iodpfeww Hlujx Ahyjbc

Kondisi: bekas, TECHNICAL DATA - Number of spindles: 2 - Number of axes: 9 - Number of turrets: 2 MAIN SPINDLE - Spindle drive power: 6.7 / 10.7 [kW] - Spindle speed: 8,000 [rpm] - Max. bar diameter: 32 [mm] - Travel Z: 305 [mm] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Spindle drive power: 3.7 / 5.5 [kW] - Spindle speed: 6,400 [rpm] - Max. bar diameter: 30 [mm] - Minimum C-axis resolution: 0.001 [degrees] - Travel X: 140 [mm] - Travel Z: 300 [mm] TURRET 1 - Number of positions: 10 - Number of live positions: 10 - Live tool speed: 12,000 [rpm] - Live tool power: 3.4 [kW] - Travel X/Z: 140/300 [mm] - Travel Y: -40/+25 [mm] TURRET 2 - Number of positions: 10 Iodpeypxqrsfx Ahysbc - Number of live positions: 10 - Live tool speed: 12,000 [rpm] - Live tool power: 3.4 [kW] - Travel X/Z: 140/320 [mm] - Travel Y: -25/+40 [mm] ELECTRICAL SUPPLY - Total connected load: 28 [kW] WEIGHT AND DIMENSIONS - Footprint: 3,870 x 1,670 [mm] - Machine height: 2,500 [mm] - Machine weight: 6,000 [kg] MACHINE HOURS - Powered hours: 23,240 [h] - Operating hours: 19,500 [h] EQUIPMENT - Control: Traub TX 8i-p - 3-color status lamp - Coolant tank: 500 [l] * with high-pressure pump: 3, 8, 20 [bar] * with paper filter - Chip conveyor - Parts catcher - Parts conveyor belt - Bar feeder interface

Kondisi: bekas, Tahun pembuatan: 2009, e678c8a9 Ibodpfow Dud Ejx Ahyoc