Mesin bubut batang otomatis

Traub TNL12

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, TECHNICAL DATA Headstock Max. bar diameter (mm): 13.0 Material tolerance (DIN 671) (mm): Ø X h9 Collet chuck: optional passage Guide bush: optional passage Max. turning length / headstock stroke with fixed guide bush (mm): 130 with rotary guide bush (mm): 80 with programmable guide bush (mm): 80 Spindle speed: 12,000 rpm C-axis electronic resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool Carrier 1 Slide travel X1 (mm): 35 Slide travel Y1 (mm): 38 (-10 +28) Rapid traverse X1 / Y1 (m/min): 15 Tool stations (number): 6 (12) Turning tool cross section (mm): 8x8 or 12x12 Clamping range diameter for powered drilling tools (mm): 0.5 - 7 Tool change time (s): 0.3 Tool Carrier 2 Slide travel X2 (mm): 35 Slide travel Z2 (mm): 50 Rapid traverse X2 / Z2 (m/min): 15 Tool stations (number): 6 Turning tool cross section (mm): 8x8 or 12x12 Clamping range diameter for powered drilling tools (mm): 0.5 - 7 Tool change time (s): 0.3 Tool Drive for Tool Carriers 1 & 2 Speed (rpm): 0...8000 Max. tools (number): 2x6 Clamping diameter for drilling tools (mm): 0.5 - 7 Subspindle / Front Attachment Max. bar diameter (mm): 13.0 Lodpfx Afoyr N Dzoiori Max. longitudinal stroke Z3, Z4 / X3 (mm): 140 / 228 Rapid traverse Z3, Z4 / X3 (m/min): 30 Tool stations (number): 4 Spindle speed: 12,000 rpm C-axis electronic resolution (degrees): 0.001 Back Working Attachment - Synchronized / Fixed Travel Z (synchronized with main spindle, mm): 80 Tool holder diameter (mm): 20 Tool stations (number): 3 Back Working Attachment (X4 Axis) Travel X4 (mm): 39 Rapid traverse speed (m/min): 15 Tool holder diameter (mm): 28 Tool stations (number): 4 Powered Tool Drive for Back Working Attachment (with X4 Axis) Speed: 0...10,000 rpm Max. driven tools (number): 4 Clamping diameter for drilling tools: driven (mm): 0.5 - 7 not driven (mm): 0.5 - 10 Coolant System Pump pressure single-stage (bar): 3 120 bar pump for front/rear attachments Tank capacity (l): 180 Delivery rate (l/min): 40

Kondisi: bekas, Tahun pembuatan: 2005, Technical Details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power: 25% duty cycle 5.8 kW Tool holder: DIN 69880 40 x 63 Total connected load: 95 kW Machine weight approx.: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m with CNC TRAUB TX 8i, bar loader TRAUB Stamag DNH61 / 3000, Main and counter spindle with C-axis 1 vertical tool carrier with B-axis Ledpfx Afswp D Nbsieri 3 turret tool carriers Extraction unit, coolant system with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH Spanntop collet chucks 40 pcs. various non-driven tool holders 6 pcs. various driven tool holders Spare parts package

Kondisi: bekas, Tahun pembuatan: 2008, drehdurchmesser-127-mm-drehlaenge-50-mm-steuerung-traub-system-t x-8i-drehzahl-12000-u-min-c-achse-0001-abgreifstation-127-mm-dreh zahlen-12000-u-min-eilgang-15-m-min-revolverkopf-x-fach-6-werkzeu gsystem-53-werkzeugsystem-3-werkzeugsysteme-ges Lrodpfxjygm R Ie Afisi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 19.441 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6000816, panjang pembubutan: 50 mm, kecepatan spindel (maks.): 12.000 rpm, saluran batang: 12 mm, model controller: Mitsubishi TX-8i, kecepatan spindle sekunder (maksimal): 12.000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Sub Spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Turret I (X/Y) Technology: 6-station turret (live tooling) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Turret II (X/Z) Technology: 6-station turret (live tooling) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Tool Attachment Number of stations: 4 Tool holder: Ø28 mm Pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Tool Attachment Number of stations: 4 Tool holder: Ø28 mm Pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control: Mitsubishi TX-8i Dimensions & Weight Spindle height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with electrical cabinet, max. configuration: 2,000 kg Weight without electrical cabinet, max. configuration: 1,600 kg Weight with electrical cabinet, min. configuration: 1,200 kg Weight without electrical cabinet, min. configuration: 850 kg Operating Hours Control on-time: 19,441 h Automatic mode 1: 7,607 h Automatic mode 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Lrsdpfx Afsx Hxv Doiji Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge unit (tube) Interface mechanically prepared Assorted fixed tool holders Rinsing gun

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, 1.0 pc. ultrasonic cleaning device Manufacturer: AIR FRESH SERVICE INDUSTRIEFILTER Type: 1-chamber cleaning system Internal tank: 750 x 600 x 770 mm Year of manufacture: 2022 THE DEVICE HAS NEVER BEEN USED. Lrsdpfx Aov Nztxjfioi

Kondisi: baik (bekas), Tahun pembuatan: 2002, TRAUB TNL 12/7 CNC Sliding Headstock Automatic Lathe TECHNICAL DATA Bar capacity: 12 mm Main spindle stroke: 130 / 80 mm Spindle power: 4 kW Main spindle speed: 12,000 rpm Upper turret: 6 positions Lower turret: 6 positions Number of driven tools, turret: 6 Max diameter, sub spindle: 12 mm Sub spindle speed: 12,000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF SUPPLY Including (list not exhaustive): - Traub TNL 12/7 CNC Lathe - Meyrat high-frequency spindles, 2 pieces - Tool holders (driven and static) - FMB Minimag 3200 C bar feeder - Hydraulic unit - High-pressure pump - Chip conveyor Lrodpfx Ajt E Dbyefiji Exact scope of delivery as per photo documentation No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Kondisi: bekas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle head strokes (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] Ledpjuhav Dsfx Afieri - Upper turret: 6 positions - Lower turret: 6 positions - Number of live tool positions on the turret: 6 - Max. diameter at subspindle: 12.7 [mm] - Subspindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and subspindle - Brake for main spindle and subspindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various static and driven tool holders

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Traub TNL 18-7B CNC Turning Automatic Base Machine: Dimensions: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Travel Z: 205 mm Rapid Traverse: 40 m/min Positioning Accuracy Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper mount Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Clamping Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth (Workpiece): 180 mm Max. Speed: 12,000 rpm Strokes: X: 120 mm | Y: -20/+40 mm | Z: 250 mm Lrsdpfxjwg Taks Afioi Rapid Traverse: X: 20 m/min | Y: 20 m/min | Z: 40 m/min Max. Clamping Pressure: 30 bar Min. Clamping Pressure: 10 bar Upper Tool Turret with B-Axis Number of Stations: 8 Shank Cross-section (Turning Tool): 16 x 16 mm Travel: X: 120 mm | Y: -25/+40 mm | Z: 250 mm Rapid Traverse: X: 20 m/min | Y: 20 m/min | Z: 40 m/min Tool-to-Tool Time: 0.5 sec Positioning Accuracy: X: 0.0005 mm | Y: 0.0005 mm | Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section (Turning Tool): 16 x 16 mm Travel: X: 120 mm | Y: -20/+40 mm | Z: 250 mm Rapid Traverse: X: 20 m/min | Y: 20 m/min | Z: 40 m/min Tool-to-Tool Time: 0.5 sec Positioning Accuracy: X: 0.0005 mm | Y: 0.0005 mm | Z: 0.001 mm Driven Tool System for Upper Tool Turret Number of Driven Stations: max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tool System for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tool System for Rear Unit Number of Stations: 7 Number of Powered Stations: max. 3 Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF SUPPLY Includes (not limited to): - Traub CNC Lathe - Tool holders, driven and static - High-pressure and band filtration system - Oil mist separator - Fire extinguishing system - Chip conveyor - Bar feeder - Operating documentation Exact scope of supply as per photo series. No guarantee for the accuracy, completeness or currency of the information provided.

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 [mm] - Max. machining length: 130 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 12.7 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 2 UPPER TURRET - Number of positions: 6 - Number of driven positions: 6 - X-axis travel: 35 [mm] - Y-axis travel: -9.5/+28 [mm] - Z-axis stroke: 48 [mm] LOWER TURRET Lrodpsuhaw Ujfx Afiji - Number of positions: 6 - Number of driven positions: 6 - X/Z-axis travel: 35/79.5 [mm] FRONT TOOL STATION - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] - X/Z-axis travel: 415/138.5 [mm] OPPOSITE MACHINING - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 10,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] ACCESSORIES - Control unit: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: FMB Minimag

Kondisi: bekas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Number of turrets: 2 UPPER TURRET - Number of positions: 6 - Number of powered positions: 6 - X travel: 35 mm - Y travel: -9.5/+28 mm - Z stroke: 48 mm LOWER TURRET - Number of positions: 6 - Number of powered positions: 6 - X/Z travel: 35/79.5 mm Lredjuhaxfjpfx Afiji FRONT TOOL POST - Number of positions: 4 - Number of powered positions: 4 - Driven tool speed: 10,000 rpm - X/Z travel: 415/138.5 mm SUB MACHINING - Number of positions: 4 - Number of powered positions: 4 - Driven tool speed: 10,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V ACCESSORIES - Control system: Traub TX8i - Driven guide bushing - Coolant tank - Bar feeder: LNS TRYTON HYBRID

Kondisi: baik (bekas), Tahun pembuatan: 2005, jam operasional: 32.870 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6030578, diameter pembubutan: 32 mm, kecepatan spindel (maks.): 8.000 rpm, Diameter batang (maks.): 32 mm, We offer for sale a Traub TNL26K automatic lathe. The machine is connected to power and can be inspected in operation by prior appointment. Year of manufacture: 2005 Spindle bore: 32 mm Main spindle: 6.7/10.7 kW; 8000 rpm Lrsdpfx Ajvldx Asfisi Counter spindle: 6.7/10.7 kW; 8000 rpm Upper turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Lower turret: 12 positions, 12x12/16x16 mm, driven tools 2/5.5 kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24 kW Bar feeder: FMB Turbo 5-42/4200 mm Swarf conveyor: Knoll 240 S1/100 Coolant compact band filter: Resy The machine comes with a large number of both static and driven tool holders—the list is shown in the attached photo.

Kondisi: bekas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 1 MAIN SPINDLE - Max. bar diameter: 12.7 mm - Max. machining length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum resolution C-axis: 0.001° SUB SPINDLE - Max. bar diameter: 12.7 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW LOWER TURRET - Number of positions: 6 - Number of driven positions: 6 - Travel X/Z: 35/50 mm - Driven tool speed: 8,000 rpm FRONT TOOL HOLDER - Number of positions: 4 COUNTER OPERATIONS - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 12,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power requirement: 18 kW EQUIPMENT - Control: Traub TX8i Lrodpfxsuhawze Afiji - Interface: RJ45 / PCMCIA - Spindle brake: on main spindle - Parts removal - Coolant tank: 200 l - Chip conveyor: KNOLL - Bar loader: FMB Minimag 3200 C - Number of driven tool holders: 2 - Number of fixed tool holders: 14 - Set of collet chucks for feed: F20 - Set of collet chucks for feed: F16 - Sleeve: 4 - Set of tubes and collets for bar feeder - Set of spare parts

Kondisi: bekas, CNC mesin otomatis bubut panjang TRAUB TNL 12/7 Lrsdpfxoxbtz Ue Afiei

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 83 kW (112,85 hp), berat keseluruhan: 6.000 kg, panjang total: 460.000 mm, lebar total: 4.000 mm, tinggi total: 4.300 mm, Tahun pembuatan: 2024, jam operasional: 300 h, jenis arus masuk: tiga fasa, Kami menjual gunting scrap/alligator shear yang berfungsi penuh. Baru saja direkondisi total oleh ATM pada akhir tahun 2023. - Siap pakai segera - Tidak perlu perbaikan Ljdpfx Afeq Nmw Ijieri - Termasuk 4 ring washer Bidang aplikasi: - Memotong katoda Cu, Zn, timah hingga 25 mm - Memotong radiator mobil hingga tinggi 105 mm - Memotong plat, profil, batang, pipa aluminium hingga 25 mm - Memotong pipa Cu, Al, timah hingga tinggi 105 mm - Memotong plat stainless steel hingga 16 mm - Memotong pipa profil Fe, plat, pipa, batang, besi strip Alligator shear, scrap shear, gunting katoda, gunting, gunting guillotine, gunting hidraulik, gunting plat, gunting meja, gunting katalisator, gunting radiator mobil, gunting kabel, gunting pipa

Kondisi: bekas, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 13 mm - Max. machinable length: 130 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Spindle hours: 26,709 h SUB-SPINDLE - Max. bar diameter: 13 mm - Spindle speed: 12,000 rpm - Spindle drive power: 2.5 kW - Minimum C-axis resolution: 0.001° - Spindle hours: 16,854 h - Number of turret heads: 2 UPPER TURRET HEAD - Number of positions: 6 - Number of live positions: 6 - X-axis travel: 35 mm - Z-axis stroke: 50 mm - Driven tool speed: 8,000 rpm LOWER TURRET HEAD - Number of positions: 6 - Number of live positions: 6 - X-axis travel: 35 mm * Y-axis travel: -9.5 / +28 mm - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 16 kVA WEIGHT AND DIMENSIONS Lredpfx Aeuhawhefiji - Space requirement: 2,850 x 1,100 mm - Machine height: 1,480 mm - Machine weight: 2,000 kg EQUIPMENT - CNC control: Traub TX 8i - Driven guide bushing - Parts removal unit - Parts conveyor belt - Chip conveyor: KNOLL 160 S-1 - Coolant tank: 500 l * with paper filter - Bar feeder: FMB Minimag 18 / 3200 C - Oil mist extractor: UAS SMOG HOG SH-05 - Number of fixed tool holders: 5