Mesin pemotong laser

TRUMPF TRUMPF TruLaser Cell 7040

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 600 mm, tegangan masuk: 400 V, berat keseluruhan: 3.560 kg, tinggi benda kerja (maks.): 170 mm, The high-speed deburring machine for deburring, edge rounding, and finishing of steel parts up to 600 mm width. This deburring and finishing machine from Q-Fin is specifically designed for applying a large radius of up to 2 mm on steel sheets. With the Q-Fin SER600 Super Edge Rounder, it is possible to deburr, grind, edge-break, round, deslag, remove oxide layers, or create a line finish on sheet metal parts up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2025 model is equipped with a magnetic support, making it suitable for processing steel cut parts and other ferromagnetic materials. The machine features 5 processing stations and is conveniently operated via an HMI touchscreen on the machine's front. The first station of the SER600 consists of a grinding unit. The abrasive belt of this unit removes burrs and/or burn marks from the product surface. If no burrs are present, the abrasive belt can be omitted or removed. It is also possible to finish the product with a finer abrasive belt or with a Scotch-Brite belt. The second and third stations consist of a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations comprise 2 round brushes rotating in opposite directions (left/right). With the brushes, you can break sharp edges or—thanks to the unique combination of two brush systems—apply a radius of up to R=3 mm. By installing special brushes, the SER600 with magnet system is also highly effective for removing oxide layers from steel products or slag from plasma-cut parts. Kjdpfx Ajl Dw D Ejglowt We offer the combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set'. The WES6000 was developed by Q-Fin to safely extract grinding dust without pressure loss. This extraction system, made entirely of stainless steel, is a wet operating unit that removes grinding dust from stainless steel, steel, and aluminum, eliminating fire and explosion risks. According to Q-Fin, it is the safest, simplest, and most sustainable way to extract grinding dust. With the WES6000, there is no more grinding dust in the air and/or in the work environment. Currently, we have 2 units of the SER600 in stock: 1x new (year of manufacture 2025) 1x only a few months in use, like new (year of manufacture 2024) Both machines can be viewed by appointment in Bergeijk. Both machines have a 1-year warranty on the structure and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. - Connected load for the SER600: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Kondisi: baik (bekas), Tahun pembuatan: 1999, nomor mesin/kendaraan: 20403, en-GB-1 Kwedpfxswncaie Aglst

Kondisi: baru, Number of drawers: 9 pcs. Dimensions (L x W x H): 1.36 x 0.46 x 0.95 m Net weight: 115 kg Drawer cabinet Drawer 1 dimensions: 124.5 x 40 x 10 cm (W x D x H) Drawers 2 to 5 dimensions: 56.5 x 40 x 6 cm (W x D x H) Kedeu Imqkepfx Aglswt Drawer 6 dimensions: 56.5 x 40 x 14 cm (W x D x H) Drawers 7 and 8 dimensions: 31 x 37 x 53 cm (W x D x H) Worktop thickness: 4 cm External dimensions of storage bins: 10.5 x 13.5 x 7.5 cm (W x D x H) External dimensions of waste container: 25.5 x 32 x 38 cm (W x D x H)

Kondisi: bekas, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m As a world leader in the field of Kellenberger overhauling/retrofit, we are not only able to deliver machines in new-machine quality and with warranty, but can also provide service for your machines: Kellenberger Kel-Varia series with Kelco 90 control. Mechanical overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New user-friendly enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control with BEMA round grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales on x and z axes - New absolute rotary encoder (for B axis) Standard equipment: - Tailstock with Morse taper MK5, optionally with MK5/short taper adapter - Steady rest with MK4 taper, optionally with fine adjustment - Grinding spindle stock T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding device belt-driven via grinding spindle motor - Grinding spindle motor 4.4 kW - High-resolution B axis - Marposs measuring system for grinding wheel measurement - Longitudinal positioning Marposs - GAP control (sensor on grinding spindle stock) ELASO integrated into control interface - Semi-automatic balancing from ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra charge: - HF internal grinding spindle - High-precision, highly tilt-resistant workpiece spindle stock Ksdpfeuwv H Tsx Agljwt - Measurement control - Extraction system - Paper band filter Control: Grinding basic cycles: - Zero the workpiece with Z-position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Measuring dressing diamonds - Corrections - External and internal cylindrical grinding (plunge and traverse grinding) - External and internal taper grinding (swivelling the B-axis, dressing with straight wheel) - External and internal radius grinding (radius dressed onto the wheel) Optional grinding cycles: - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. Kwedpjfxyhfefx Aglot In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Tahun pembuatan: 1976, Kondisi: baik (bekas), Bandwidth: 300 - 1,350 mm Strip thickness: 0.35 - 3 mm Coil weight: 12.5 t Mandrel Ø: 508 mm Kedpfx Agobh Ubwjlowt

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2015, Machine - Enclosed machine frame - Automatic pallet changer (longitudinal direction) - Torque drive combined with linear direct drives - Enclosed beam guidance via fiber optic cable (LLK) - Machine cooling unit (water-air) - Integrated control cabinets with internal lighting - TruDisk power supply through the machine - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Oil spray unit - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and installation device TRUMPF Laser - Solid-state laser TruDisk with 1 fiber optic output (LLK) - Laser cooling unit (water-air) - Pump diode excitation - Laser power control Cutting Unit - Universal cutting unit with fully adaptive lens system - Single cutting head strategy - Protective glass for lens contamination prevention - Protective glass condition monitoring - ControlLine: Height control and sheet edge detection Control - Advanced shop-floor programming (TruTops via network access) Kjdoxw Uryepfx Agljwt - Fast re-production - 17" touch color display - Integrated technology data - Automatic shut-off - Programmable cutting gas/pressure selection - ContourLine - Microweld - FastLine - FlyLine - AdjustLine - Remote service via Internet - Integrated e-shop Data Transmission - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extractor - Machine enclosure with certified viewing window (right door) - Roll-up roof Special Equipment: • 3001 upgraded to TruDisk 4001 • Extended pallet extension • Dust protection sheet metal • Viewing window, left • Viewing windows, right side • Storage interface • BrightLine Fiber • Titanium cutting package • Brass cutting package • Copper cutting package • Nozzle changer

Kondisi: bekas, CNC cylindrical grinding machine STUDER S31 CNC LeanPro with "Pictogramming" Distance between centres: 1000 mm Centre height: 175 mm Swivelling grinding head (B axis) 360° (1° increments) 2 external grinding wheels 1 internal grinding wheel External grinding wheel: 400 mm x 40 mm x 127 mm Overhauled spindle > see photos Tailstock: Morse taper 4 (CM 4) Speed range: 0–1000 RPM CNC control: Fanuc Programming: Pictogramming Heidenhain linear encoders The machine is under power in our warehouse in Gussago (BS), Italy. Ksdpfx Agswim U Hslowt

Kondisi: baik (bekas), Tahun pembuatan: 2000, tinggi total: 47.000 mm, lebar total: 27.000 mm, panjang total: 25.000 mm, lebar meja: 1.000 mm, panjang meja: 1.800 mm, berat keseluruhan: 43.000 kg, lebar pelat tuas: 600 mm, langkah bantalan cetakan: 200 mm, Siemens Simatic OP 27 control system Kedpfetiwgiox Aglswt Sick photoelectric sensor Separate Rittal control cabinet Side walkways Floor-level installation

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 55.806 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.500 kN, diameter sekrup: 45 mm, panjang total: 4.700 mm, lebar total: 1.700 mm, tinggi total: 2.000 mm, berat keseluruhan: 4.850 kg, For sale: Injection moulding machine by Arburg, model 470 C 1500-400. The offer includes an Arburg handling system, type Multi Select, X/Y/Z axis 600/600/1400 mm. The machine is in excellent condition and ready for immediate use. Technical Details: Year of manufacture: 2011 Clamping force: 1,500 kN Kwjdpfx Asw E Itijglet Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Operating hours (pump): 55,806 h Injection unit: Ø 45 / SP 400 Injection volume: approx. 254 cm³ Shot weight: approx. 232 g Injection pressure: up to 1,580 bar Dimensions (LxWxH): approx. 4700 x 1700 x 2000 mm Weight: 4,850 kg Transport and loading can be arranged across Europe at an additional cost if required. Prices plus VAT. Viewing possible by appointment. Please contact us; our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell your existing equipment? For further information or contact options, please visit our website.