Aufspann-richt-schweisstisch

UNBEKANNT System 28

Tahun pembuatan: 2018, Kondisi: hampir baru (bekas), Dumeta hydraulic height-adjustable welding positioner Lasdpehua Dqefx Al Nsd 500 kg load capacity, height-adjustable welding positioner with through-hole, 100 - 200 mm Plate diameter: 700 mm Horizontal height: min. 0.6 m, max. 1.2 m Tilted height: min. 0.40 m, max. 1.0 m Rotational speed: 0.11 - 1.25 rpm Weight: 750 kg Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Kondisi: siap digunakan (bekas), lathe-spec-001 Lajdpfxoxmakye Al Njd

Kondisi: sangat baik (bekas), Tahun pembuatan: 1981, Centre height 130 mm Swing over bed 260 mm Swing over cross slide 140 mm Centre distance 600 mm Spindle bore 30 mm Bed width 255 mm Spindle mount DIN 55027 size 5 Speed range 35.5 - 3150 rpm Lajdexz Rfkepfx Al Nod Longitudinal feed range 0.04 – 0.4 mm/rev Cross feed range 0.02 – 0.2 mm/rev Metric threads 0.2 – 18 mm Inch threads 2 – 76 tpi Module threads 0.4 – 13.5 module Diametral pitch threads 2.6 - 36 DP Tailstock taper MT 4 Drive power 3 kW Dimensions (L x W x H) 2140 x 850 x 1400 mm Weight 1100 kg Equipment / Special Features: • 3-jaw wedge-bar chuck FORKARDT F 160 with jaw safety, Ø 160 mm • Quick-change toolholder system "Multifix" size B • Coolant system with chip guard rear wall • Chuck guard • Hardened bed ways • Machine light • Bed stop • Emergency stop switch New brake linings, new drive clutch, new V-belts, and new gearbox and V-belt bearings in 2026, repair costs €3,950.00 net. Options: New 2- or 3-axis digital readout K+C, fully installed on request Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Tahun pembuatan: 2018, Kondisi: seperti baru (mesin pameran), Welding positioner KT 50 Load capacity horizontal: 50 kg, tilted: 25 kg Power supply: 220V, 50 Hz Table diameter: 320 mm Table height: 400 mm, tilted to center: 300 mm Length: 650 mm, width: 650 mm Tilt range: stepless adjustment via geared crank motor, 0 – 90° Speed: 1.7 – 15 rpm Incl. foot remote control Lajdpfx Alsd A Etyj Nsd

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2023, jam operasional: 813 h, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 900 mm, kinerja area: 5.700 m²/jam, berat keseluruhan: 957 kg, kapasitas tangki air: 200 l, tegangan baterai: 36 V, 1 Lajdpfxsxx Ta Ee Al Nod

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Kontrol 3-sumbu, kontrol lintasan aktif Heidenhain TNC 123 Kecepatan putar 40 - 2000 rpm, transmisi langsung berjenjang geometris dengan 16 tingkat gigi untuk torsi maksimum / performa milling Feed 5 sampai 500 mm/menit, dapat diatur tanpa langkah Laedpfsyg I Nfox Al Nod Rapid traverse 1,2 m/menit Pinole: Pinole dapat ditarik, vertikal 60 mm, SK40 ulir penarik M16 Sumbu X/Y/Z 300/160/340 mm Meja sudut 600 x 210 mm, beban maksimum 200 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 1.500 kg, fi Laodpfx Aevlgzael Nod

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut: 300 kg, Welding positioner Protec KT 300 H, 170/400 special version Lajdpfjrypmvex Al Nsd Horizontal load capacity: 300 kg, tilted load capacity: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Quick-action chuck, diameter 300 mm, surcharge: €550 Quick-action chuck, diameter 400 mm, surcharge: €750 Crank gear motor, stepless tilt adjustment 0 - 90° Stepless speed adjustment: 0.01 to approx. 5 rpm Incl. foot remote control Digital display with welding time limitation (optional)

Kondisi: baru, Table length: 2400 mm Table width: 1200 mm Table height: 200 mm Material thickness: 25 mm Weight: 920 kg Manufacturer: GERD WOLFF Technical details: • Length: 2400 mm • Width: 1200 mm • Height: 200 mm • Weight: 920 kg • Bore diameter: 28 mm • Bore spacing: 100 mm • Plate thickness: 25 mm Advantages and Features: Lajdpfx Aljynbmms Ned • 3-day gas nitriding process • Increased corrosion resistance • Anti-adhesion protection against welding spatter • Maximum load capacity • Increased fatigue strength • Enhanced vibration resistance • Fine scaling • Reinforcement through weld seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Compatible accessory set available (optional) Our welding tables are manufactured using HT 300 cast iron quality and are nitrided as a single piece following mechanical processing. Additionally, these tables feature precise fine scaling, which is engraved using laser technology. To ensure optimal stability, our welding tables are reinforced with weld seams and ribs on the underside. (See images) The tables also undergo a 3-day gas nitriding process, which further enhances corrosion resistance as well as the tables’ fatigue and vibration strength. All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, maximum is 665 mm. This provides a variable working height of 820 to 865 mm. Further available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 The images do not correspond to the original size and are for illustrative purposes only. Our welding tables are manufactured by a renowned producer for our distribution brand "GERD WOLLF Maschinenfabrik". 3D welding table – 3D clamping fixtures – 3D precision welding table

Tahun pembuatan: 2022, Kondisi: baru, Welding rotary table KT 300 Load capacity horizontal: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 500 mm Hollow shaft diameter: 140 mm Table height: 600 mm, tilted to center: 450 mm Laedeg Sz Ucepfx Al Nsd Length: 650 mm, Width: 650 mm Stepless tilt range via crank gear motor: 0 – 90° Speed: 0.3 – 2.5 rpm Including foot remote control Optional: Quick-change chuck Diameter 400 mm, €550.-