Mesin frais tipe planer - kolom ganda

Unisign Uniport 6000

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 55.000 h, jarak pergerakan sumbu X: 10.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan spindel (maks.): 6.000 rpm, daya motor spindle: 36.000 W, produsen pengendali: SIEMENS, model controller: Sinumerik 840 D, jumlah sumbu: 3, This 3-axis gantry milling machine, the Unisign Uniport 6000, was manufactured in 2010. It offers an impressive X-axis travel distance of 10,000 mm, a Y-axis travel of 1,500 mm, and a Z-axis travel of 1,000 mm. The machine features a powerful 36 kW main drive and an automatic tool changer with 30 positions. If you are looking for a high-quality milling machine, you should consider the Unisign Uniport 6000 gantry milling machine we are offering for sale. Please contact us for further details. • Space requirement: approx. 12 x 11 m • Passage: height 1,000 mm / width 1,500 mm • Maximum torque: 720 Nm • Gearbox: 2-stage, ratio 1:4 • Machining capacities (C45): Drilling Ø 120 mm / Tapping M55 / Milling 100 cm³/min • Design: gantry construction with movable bridge and stationary clamping table • Table configuration: clamping rails crosswise at 750 mm intervals (standard platen panels omitted) • Tool changer: automatic tool change; 30-position chain magazine on the portal column (tool change into angle head possible) • Operation mode: pendulum machining possible Hodpey A Ifmjfx Aa Dofi • Cooling: machine cooling system; water-air heat exchanger integrated in the control cabinet • Coolant system: dry machining; pre-installed/prepared for coolant use • Maintenance condition: tool magazine and X1/X2 ball screws completely overhauled in 2023; last OEM service in 2023 • Installation: machine recessed and anchored in a foundation pit Additional Equipment • Angular drilling and milling head, 1 unit, 4,000 rpm, SK50, with Hirth coupling for high accuracy and stability; plus 1 spare unit • Probing: RWP20.50-M probe; plus 1 spare probe Hexagon RWP 20.50-M • Hydraulic clamping device with clamping bridges for axle machining, including hydraulic power unit • 1x T-slot clamping plate (2500 x 1200 mm) as alternative to hydraulic device • Swarf conveyor: hinged belt type • Safety fence with Sick light grids • Makrolon curtains on both sides of the bridge (motorized height adjustment) • Partition wall with inspection window • Set-up and leveling elements • Various spare parts • Including documentation Technical Specification Taper size: SK 50

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, jam operasional: 2.500 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.060 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 600 mm, model controller: Heidenhain ITNC640, kecepatan spindel (maks.): 10.000 rpm, Kami menawarkan Posmill CE1000 dalam kondisi baik dengan sekitar 2.500 jam spindle dengan opsi berikut: Heidenhain linear scale pada sumbu X, Y, dan Z Kontrol Heidenhain TNC 640 Spindel bertekanan udara Spindel 10.000 RPM ISO40 Pengganti alat otomatis 40 alat (ATC) Belt filter dengan pendingin internal 20 bar Hexagon touch probe Hexagon tool probe Konveyor chip Hfsdpfx Aaoyindao Dji Kompensasi panas spindle pada sumbu Z Spesifikasi teknis: Perjalanan sumbu X: 1060 mm Perjalanan sumbu Y: 600 mm Perjalanan sumbu Z: 600 mm Mesin dalam toleransi baru dan protokol geometri tersedia.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 27.000 h, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.000 mm, berat keseluruhan: 21.000 kg, kecepatan spindel (maks.): 18.000 rpm, jumlah sumbu: 5, This 5-axis DMG MORI DMC 100U duoBlock was manufactured in 2012. It features a pallet clamping area of 1000 × 800 mm, rapid traverse speeds up to 60 m/min, and a high-speed spindle with 18,000 rpm. The machine is equipped with a 60-position tool changer and a 980-liter coolant system. Accessories such as a chip conveyor, oil mist separator, and BLUM laser tool measurement enhance the machine’s functionality. If you are seeking high-quality milling capabilities, consider the DMG MORI DMC 100U duoBlock we have for sale. Contact us for further information. • Worktable: • Number of pallets: 2 (working/preparation area) • Pallet clamping area: 1000 × 800 mm • Pallet weight: 630 kg • Axis travels: • B: 210° • C: 360° • Motions: • Acceleration (X/Y/Z): 7.0 / 6.5 / 6.5 m/s² • Resolution (X/Y/Z): 0.001 mm • Positioning tolerance (X/Y/Z): 0.006 mm • Positioning tolerance (A/B/C): 8 / 6 / 5 arcsec • Workpiece capacity: • Max. diameter: 1000 mm • Max. height: 1600 mm • Max. weight: 2000 kg • Spindle: • Torque: 119 Nm (40% duty cycle) • Tool changer: 60 positions • Coolant unit: 980 liter high-pressure through-spindle coolant with paper belt filter • Availability: In excellent condition, available for demonstration (video available) Additional Equipment • 7 additional pallets • Chip conveyor • Oil mist separator • Infrared measuring probe • BLUM laser tool measurement • 3D Quick Set preparation • Cooling • Blown air through the spindle • Maintenance kit (filters, scrapers, installation tools) • Complete manuals (English, Estonian and digital copy) Hfjdpfx Aaex D Eh Es Dji

Kondisi: baru, Tahun pembuatan: 2025, Ref. No.: 10463 Manufacturer: IGREK Model: FR 3500 XL Year of manufacture: 2025 Control type: CNC control CNC system: Siemens 840 D / Heidenhain iTNC 640 Location: Istanbul Country of origin: Türkiye X travel: 6,500 mm Y travel: 3,500 mm Z travel: 1,400 mm A-axis: +/- 115° C-axis: 360° Spindle speed: 12,500 rpm Max. torque: 235 Nm Rapid traverse X/Y/Z: 30 m/min Table size (LxW): 2,290–6,490 x 3,580 mm Spindle drive power: 54 kW Max. table load: 4,000 kg Tool interface: HSK-A100 Machine length: 11,500 mm Machine width: 7,400 mm Hfedpfx Aajxmd Szs Dsi Machine height: 6,600 mm Weight: 120 t Additional information: IGREK FR 3500 XL – Precision and performance at the highest level The IGREK FR 3500 XL is a state-of-the-art CNC-controlled 5-axis gantry milling machine (year of manufacture 2024). Specially designed for demanding machining of large components, it impresses with its versatility and precision. Equipped with the latest Siemens 840D or Heidenhain iTNC 640 control system and a robust construction, this machine offers optimal conditions for production across various industries. Key features: Large machining ranges: With travels of 6,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), this machine is ideal for processing large workpieces. 5-axis simultaneous machining: The A-axis with a swivel range of +/- 115° and the C-axis with a rotation of 360° enable highly precise machining of complex geometries. Powerful spindle: The spindle achieves speeds of up to 12,500 rpm and a maximum torque of 235 Nm – perfect for demanding milling tasks. High stability: A machine weight of 120 tonnes and a table load capacity of up to 4,000 kg ensure low-vibration operation even with heavy workpieces. Flexible tool interface: The HSK-A100 interface allows for quick tool changes and optimal process times. Rapid traverse speed: At 30 m/min in the X, Y, and Z axes, high productivity is guaranteed. Technical data overview: Table size: 2,290 – 6,490 x 3,580 mm Spindle power: 54 kW Max. torque: 235 Nm Tool interface: HSK-A100 Machine dimensions (LxWxH): 11,500 x 7,400 x 6,600 mm Max. table load: 4,000 kg The IGREK FR 3500 XL sets new standards in large component machining. Available immediately, it comes with comprehensive guarantees and direct, global manufacturer support. Utilize the latest technology for your production—contact us for more details!

Kondisi: bekas, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MT5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivelling 360° Grinding headstock swivelling 180° ± Grinding spindle speeds 1500, 1700, 2200 rpm Plunge feed: incremental 0–9.99 mm/Ø Plunge feed: continuous 0–9.99 mm/Ø Table swivelling ±8° Longitudinal table travel 1100 mm Table speed 0.02–6 m/min Workpiece weight between centres 130 kg Cross travel max. 270 mm Hfedpfx Aaeuxfupj Dei Workpiece weight max. (flying) 130 kg incl. clamping Internal spindle mounting 80 mm Tailstock quill mounting MT3 Quill travel 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern and future-proof control system. Photo shows a previously delivered machine. -The touch panel operation is extremely user-friendly. -The icons on the control panel are virtually identical to the original control, so no retraining is required. -Diagnostic function with display of PLC messages and digital I/Os. -Dressing function can be extended or modified to customer requirements. -Workpiece spindle oriented stop available on request. -New maximum infeed amount: 40 mm, extendable upon request. -Digital display on 2 axes. X-axis resolution 0.5 µm. Options: -Encoder with digital display on the workpiece headstock -Encoder with digital display on the grinding headstock (no height adjustment with spindle possible) -New stable internal grinding attachment diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for grinding spindle Includes: -Operating tools -Clamping tube for chuck Further accessories available upon request. The machine is equipped with an electronically controlled feed system in the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face and internal grinding in a single setup of individual parts. Available options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measuring control At the present time, the machine tool does not comply with the essential safety and protection requirements as specified in the BetrSichV 2015. The required minimum safety objectives must be determined by a risk assessment in accordance with the BetrSichV.

Tahun pembuatan: 1998, Kondisi: baik (bekas), Hersteller: UNION Modell: Ti 1800 Baujahr: 1998 Hfodokwcdbspfx Aa Dji Technische Spezifikationen Tischlänge: 2000 mm Tischbreite: 1800 mm Maximale Tischbelastung: 16.000 kg Vorschub in der V-Achse: 1250 mm Drehbereich B-Achse: 360.000° Maximale Drehgeschwindigkeit B-Achse: 1,35 U/min Verfahrgeschwindigkeit V-Achse: 4000 mm/min Abmessungen (ca.): Länge: 3400 mm Breite: 2000 mm Höhe: 920 mm Gewicht: 6500 kg Bitte beachten Sie: Die obenstehenden Angaben wurden nach bestem Wissen und Gewissen von uns sowie, soweit möglich, vom Hersteller zusammengetragen. Die Angaben erfolgen in gutem Glauben, ihre Richtigkeit kann jedoch nicht garantiert werden. Sie stellen daher keine zugesicherten Eigenschaften oder vertraglichen Zusicherungen dar. Wir empfehlen, alle wichtigen Details eigenständig zu überprüfen.

Kondisi: baik (bekas), Tahun pembuatan: 2016, Abmessungen des Tisches: 3000 x 1700 mm Verfahrwege X/Y/Z: 3200 x 2100 x 920 mm Tischbelastung: 11.000 kg Abstand Spindelnase zu Tisch: 164 – 1084 mm Spindelaufnahme: DIN 50 Spindeldrehzahl: 6.000 U/min Werkzeugmagazin: 40 Plätze (ATC) Steuerung: Hurco WinMax 5 Späneförderer Hfodpfowu Dlaex Aa Dsi

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, en-Baty SM350 Profile Projector – High-Performance Inspection for Demanding Applications The Baty SM350 is an advanced profile projector featuring a 350 mm screen and a robust, high-precision staging table with a measuring range of 250 mm x 125 mm. It is ideally suited for precise optical inspections in settings where reliability and accuracy are of utmost importance. XLS: A simple 2-axis digital readout for X and Y measurements, ideal for basic applications. MX200: This model expands capabilities to include geometric measurements, such as angle, radius, and distance calculations, and enables the generation of tolerance reports. Hfjdpfx Asuyh Rpja Dsi FT2: The most advanced version offers a touchscreen interface with Fusion 2D software. This model provides optical edge detection and comprehensive reporting, including SPC charts and DXF overlays. The device is equipped with a 3-position lens turret, allowing for quick and easy switching between different magnification lenses without the need for recalibration. With the FT2-E display option, the SM350 also provides advanced measurement features such as edge detection and DXF overlay. These functions make it the ideal solution for detailed inspections and demanding measurement tasks in manufacturing industries.

Kondisi: baik (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.000 mm, Travel paths: Longitudinal (X): 2500 mm Vertical (Y): 1250 mm Transverse (Z): 1000 mm Table size (rotary): Length: 1000 mm Width: 1000 mm Max. table load: 5000 kg T-slots: 6 x 22 mm H10 Hfsdpfxeykbxzj Aa Dsi Drive power: 100 % duty cycle 24 kW Tool holder: ISO 50, DIN 69871 - AD Spindle speeds: 20 – 4000 rpm Torque: 479 Nm Feed range X, Y, Z axes: 10 – 10000 mm/min Rapid traverse X, Y, Z axes: 25000 mm/min Weight (approx.): 15000 kg Equipment: - Internal coolant supply according to DIN 69871 form AD, including minimum quantity lubrication with 15 selectable dosages via M-functions, programmable: 20 bar - NC rotary table, size 1000 x 1000 mm as 4th axis, integrated into machine control. Max. load 5000 kg, positioning accuracy ± 5 arc seconds, table surface with 22 mm T-slots - Chip conveyor for TA-D 25 - Tool changer Accessories: - Front-mounted movable control panel including Heidenhain iTNC 530 control (single processor) - Portable electronic handwheel HR 420 with 3 m spiral cable (option) - 3D thermal expansion compensation - Automatically indexing milling head/2 planes at 2.5° increments (H200) (option) - Distance from spindle nose to table edge 250 mm - NC rotary table, size 1000 x 1000 mm as 4th axis integrated into the machine control. Max. load 5000 kg, positioning accuracy ± 5 arc seconds, table surface with 22 mm T-slots. - Coolant system with 150 l tank, delivery pressure 5 bar, delivery rate 50 l/min, outlet via spray ring around machine spindle - Splash guard enclosure, fully closed on 4 sides with front sliding doors and additional side sliding door on the left column with viewing windows on all 4 sides - Heidenhain servo motors on all axes with digital drive technology - INA linear roller guide system on all axes - Direct linear measuring system Heidenhain on all axes - Telescopic covers for X-axis guides - Ball screws in X, Y, and Z axes - Automatic cycle lubrication for all axes and drive elements - Electrical equipment by Siemens - Hydraulic system by Vickers

Kondisi: bekas, Tahun pembuatan: 2005, - Fagor 8055 CNC control - Additional tank for through-spindle cooling (15 bar) 400 liters - Year of manufacture: 2005 Technical specifications: Hfodpfx Astvf Htoa Dsi - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Max. table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg