Sander sabuk lebar

UNITEK 1100 9/24

Kondisi: baru, Technical data: Working width: 1100 mm Abrasive belt size: 1120x2150 mm Max working height: 160 mm Steel calibration roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding pad width: 50 mm Hjdpegtm U Aofx Aansfg Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Continuously adjustable feed belt speed: 4-20 m/min Work table lift motor power: 0.25 kW Pneumatic pad, lifting/lowering: YES

Kondisi: baru, Tahun pembuatan: 2025, en-AD310-spiral-deluxe-description Hedsvz Eqxspfx Aansfg

Kondisi: baik (bekas), Tahun pembuatan: 2019, Robot industri Produsen: Kuka Tipe: KR60 HA Tahun pembuatan: 2018/2019 Hfsdpfxjn Utbgj Aanjg Jam operasi sedikit Jangkauan: 2033 mm Berat: 665 kg Kapasitas angkat: 60 kg Kontrol Kuka KRC4 Berat: 150 kg Perangkat lunak: V8.3.40 Kuka touch panel Kabel koneksi Kuka

Tahun pembuatan: 2001, Kondisi: hampir baru (bekas), Dual-aggregate sander, two lower aggregates, each with 2 x 7.5 kW main power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished; the conveyor belt is in very good condition. Fitted with a new graphite pad. The machine features two bottom-mounted aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width: 630 mm. Two feed speeds: slow and fast. Sanding belt length: 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt feed speed: 9/20 m/min. Number of sanding pads: 1. CE conformity declaration. Rated total power: 21 kW. Max working height: 160 mm. The machine is equipped with two lower working rollers. Conveyor belt with upper feed system. Hjdpfx Aajfxpbmsnefg

Kondisi: baru, Tahun pembuatan: 2026, Crosscut and Mitre Saw, Type: ZS 200 N – 5 kW Motor Includes machine stand, but without saw blade Machine can be tilted using handwheel and worm gear (at the rear) Saw blade diameter: 520 mm, blade bore: 50 mm Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Saw can be swiveled to one side to approx. 25° for acute angles and tilted left up to 30° for flat cuts Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available - Hodpfx Aji Dfideanofg

Kondisi: bekas, nomor mesin/kendaraan: 007928, Posisi 1: Mesin sikat CEFLA-EASY 2000 + TR2V-FV3 Posisi 2: Mesin pelapis cat CEFLA-EASY 2000 + TR2V-FV3 Hfodpfx Aaewu Ackeneg Posisi 3: Pengering cat CEFLA-EASY 2000 + TR2V-FV3

Kondisi: baru, DM100 ZC - performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products using a contact roller (approx. 55° Shore) with an abrasive belt and removes heavy burrs in the initial step. The second station is equipped with 2 counter-rotating cross belts with abrasive blocks and rounds the edges of the entire product, both inside and outside, in a second step. A major advantage is deburring products with surface protection foil, as only the edges are processed without damaging the foil. Technical Data – DM1100 ZC: Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Number of cross-belt stations: 1 Abrasive belt dimensions (mm): 1100x2200 Abrasive belt speed (m/s): 10 Cross-belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Hodpfx Aajd Hintjnofg Abrasive belt motor per head (kW): 18.5 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Current consumption (A): 55 Dust extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230x2300x2250 Weight (kg): 3300

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 4.600 mm, jarak lintasan sumbu Y: 1.935 mm, jarak gerak sumbu Z: 275 mm, jumlah sumbu: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X = 4600 mm, Y = 1935 mm, Z = 275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip removal, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 machine, which we are offering for sale. Contact us for further information. Worktable and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of the panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working zones in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), pneumatic system • 4 removable central stops, stroke 140 mm (2 left + 2 right), pneumatic system • Sensor for detection of lowered stops • Pneumatic system for lifting rod supports • 6 lifting rod supports for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump Hfjdpfx Aaox D H Hcjnog • 250 m3/h rotary vane vacuum pump for standard vacuum system Processing Units and Configuration • Configuration C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis processing unit • Flange for mounting units on a 5-axis interpolating machining head (units can only be used when the electric spindle is vertical) • Configuration C3-P2: • Additional Z-slide for rear processing units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for removing chips and scrap parts (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical data and descriptions are taken from the original order confirmation and are for information purposes only; they are not binding.

Kondisi: hampir baru (bekas), Arbeitsbreite 1350 mm Die Maschine befindet sich, wie auf den Bildern zu sehen, in einem ausgezeichneten neuwertigen Zustand. Hfjdpfx Aaeuuitgjnog

Kondisi: baru, Tahun pembuatan: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you truly create perfect foundations. It was precisely with this goal in mind that the T54 was developed. The machine enables you to surface workpieces easily to state-of-the-art standards and reliably apply angular edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut action is available as an optional extra. Chamfer planing is effortless – thanks to the user-friendly single-handed adjustment, any angle between 90° and 45° can be set quickly. The robust cast iron tables of the T54 provide secure support even for large and heavy workpieces. If you require more support, you can extend both infeed and outfeed tables by 380 mm each, also in cast iron of course. Hfedpfx Ajpgkmweaneg Technical Data Table width: 500 mm Table length: 2840 mm Max. depth of cut: 8 mm Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Features: T 54 T 5462-a Suvamatic T 541-a Tersa cutterblock with 4 knives Location: Available ex-stock, 54634 Bitburg - Immediately available -