Mesin pengamplas sabuk lebar

Unitek Nice 1NKRT 970

Kondisi: baru, Tahun pembuatan: 2024, TECHNICAL DATA Crodpfx Aefpb Nmoqxjd Table size: 1100 x 760 mm Table height: 870 mm Spindle shaft (milling spindle) Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with fixed, one-sided tilting spindle for tilt range from -5° to +45.5° Positioning control for height and tilt adjustment with height zeroing and offset travel Electronic position and speed indicators 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick-clamping system for cutter arbor Finely planed cast iron table with rigid frame support Control panel mounted below on rigid frame support Cutter fence 216 with total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum chip deflector lips Machine socket outlet Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Spindle shaft 30 mm, non-interchangeable CE compliant GS tested

Kondisi: bekas, Tahun pembuatan: 2022, Used machine Year of manufacture: 2022 Equipment and Technical Data: - Galvanized sheet steel construction - Space-saving compact design - Delivered ready for operation - ATEX - FSA-tested explosion pressure resistance - Low energy consumption with high performance thanks to a clean air-side high-performance fan with special impeller - Energy-saving motor, efficiency class IE4 - 4 large-volume collection containers with liner bags - High safety and long service life due to certified filter media with test certificate - Pneumatic pulse filter cleaning ("jet" cleaning) with time-dependent control for regenerating the filter surface - PLC control with display for 4 slide valves EPN 24V DC, 4 machine start contacts, and 1 external start automation (additional slide valve control available at extra cost) - 5 m connection cable with plug - Automatic fire suppression system with special extinguishing agent container (no connection to water supply required) - The ABC powder extinguishing agent is not suitable for metal fires or fires involving cooking fats and oils - Non-return flap, type-tested - Design according to DIN EN 16770 Crodpfx Aqjx H Dahsxed - Residual dust content in exhaust air less than 0.1 mg/m³ - GS-HM-03 “H3” certification passed - IE5 efficiency power pack - Start-up slide valve control: Z 16 - Motor power: 11 kW - Nominal air volume (Vnenn): 6927 m³/h at 20 m/s - Max. air volume (Vmax): 8000 m³/h - Negative pressure at Vnenn: approx. 3100 Pa - Negative pressure at Vmax: approx. 2300 Pa - Collection capacity: 495 l - Sound pressure level: < 73 dB(A) - Extraction port diameter: 350 mm Dimensions: 3930 x 1030 x 2560 mm Weight: approx. 1080 kg Original price: over €30,000 Availability: short-term Location: 63934 Röllbach

Kondisi: baru, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel unit 2 combination unit with pad Pad pneumatically pressed Abrasive belt dimension: 970 x 2150 mm Total power of two sanding units: 11 kW Feed belt speed (inverter-controlled): 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Diameter of sanding rollers: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the abrasive belt without the use of compressed air (ECO GEAR SYSTEM) Infinitely variable feed belt speed via inverter: 4-20 m/min Automatic star-delta starter Steel roller on the first unit, rubber-coated roller on the combination unit Electronic table height display Automatic material thickness sensor and table positioning system Safety switches Automatic machine switches Codpfx Aqeg A D Anjxord Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Kondisi: baru, Tahun pembuatan: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application to straight workpieces (EVA-PUR glue pot with run-off function optional), HF end trimming station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking, and integrated distance control for contactless activation of processing functions. Suitable for ABS, PVC, melamine and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 / 6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying • 3 free spaces for finishing units • 10" color touchscreen. Machine length: 4,030 mm Workpiece thickness: 8 – 60 mm Codpfx Aew I U Drsqxerd Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0 – 2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1,050 kg Options: • Surcharge for radius scraper unit with air blast device + extraction • Surcharge for flat scraper unit + extraction • Surcharge for buffing unit • EVA/PUR glue pot with run-off function • Surcharge for diamond tools, height = 65 mm for pre-milling unit • Riepe spraying system (anti-adhesive) at pre-milling unit • Riepe spraying system (cleaning spray before buffing unit) • Piping system with 90° bend + manual slide valve, mounted on the machine with D=200 mm Availability: short notice Location: Hochheim

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 3.000 mm, PRESSA PANAS MANNI - Ukuran meja: 3000x1300 mm Cjdpfox Rqtisx Aqxsrd - 6 silinder - Dilengkapi dengan boiler air panas berbahan sisa kayu

Tahun pembuatan: 1978, Kondisi: baik (bekas), Four-sided planer Weinig U 17N, 7-head Planing width: 170 mm Planing height: 120 mm Number of spindles: 7 Spindle configuration: bottom/right/left/right/top/bottom/universal Electric height adjustment Feed speed: 6.5 to 45 m/min Csdpeg Sa R Dsfx Aqxjrd Feed rollers driven by cardan shafts 11 upper feed rollers

Kondisi: bekas, Tahun pembuatan: 1983, Used machine Year of manufacture: 1983 Condition: fully checked and serviced, including new feed belt Equipment and technical specifications: - Including combination unit with contact roller and sanding pad - Height-adjustable contact roller for calibration - Air cushion pressure shoe controlled by the workpiece - 4-position adjustable grit compensation - Pneumatic belt tensioning device - Rotating cleaning brush at the machine's outfeed side - Belt oscillation monitored via photoelectric sensor for automatic supervision and control of lateral belt tracking, ensuring consistent belt wear - Roller table at machine infeed - Digital display for the electrically driven workpiece thickness adjustment - Additional veneer sanding beam - 2x spare sanding pads included - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Passage height: 150 mm - Main motor: 15 kW Credpfx Aqjwka T Sexjd - Feed speed steplessly adjustable 2.5 - 12.5 m/min - Extraction ports: 2 x 200 mm Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Availability: short-term Location: 63934 Röllbach

Kondisi: bekas, Tahun pembuatan: 1984, Used machine Crodpfjw R Hh Uox Aqxed Year of manufacture: 1984 Condition: fully checked and serviced Features and technical specifications: - Including combination unit with contact roller and sanding shoe - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With a rotating structuring brush on the machine's outfeed side - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Workpiece pass-through height: 150 mm - Main motor: 15 kW - Infinitely variable feed speed: 2.5 - 12.5 m/min - With roller table at infeed - With separate additional structuring brush - With roller table at outfeed - With digital display device for the electric motor-driven workpiece thickness adjustment - With automatic workpiece thickness adjustment - Extraction ports: 2 x 200 mm - Feed belt is functional; defective in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Photos show the machine in uninspected condition! Availability: short-term Location: Röllbach

Kondisi: bekas, Tahun pembuatan: 2001, Used machine Year of manufacture: 2001 Features and technical specifications: - Constant working height - Equipped with a combination unit with steel contact roller and electronic CPS segmented pressure beam with 25 mm spacing - Sanding width: 1100 mm - Sanding belt length: 1900 mm - Workpiece thickness min./max.: 3 - 150 mm - Feed speed: infinitely variable, 2.5 - 13 m/min - Sanding unit: 11 kW Lacquer package features: - Infinitely variable belt drive speed via frequency inverter - Belt cleaning/blowing device - Vacuum conveyor belt with blower Control system: - Terminal with 50 program memory slots - Simple menu navigation with clear text display - Visual indicator of active components during operation - Fully automatic PLC-controlled start sequence for all drives - Digital operating time recording - With cleaning brush - Roller table at infeed - Roller table at outfeed - Extraction capacity 1850 m³/h - Extraction ports: 1 x 180 mm, 1 x 140 mm, 2 x 100 mm Codpfx Aqewka Snexord - Compressed air connection: 6-8 bar - Air consumption: 10 l/min Weight: 2200 kg Availability: by arrangement Location: Röllbach

Kondisi: bekas, Tahun pembuatan: 1976, Mesin bekas Tahun pembuatan: 1976 Perlengkapan dan data teknis: - pengamplasan dari bawah - pengaliran material melalui rol karet - kontrol osilasi tanpa kontak - balok tekanan yang dapat diganti dengan cepat - pengaturan ketebalan alat secara elektromotorik dengan tampilan digital yang mudah dibaca - tombol tekan dengan kontrol kontaktor - lebar pengamplasan 1350 mm - ketebalan benda kerja maks. 150 mm - lebar belt amplas 1360 mm - panjang belt amplas 1900 mm - pengumpanan roller dapat diubah 10 + 20 m/menit - sambungan udara tekan 6 bar - kebutuhan udara sekitar 180 NL/menit Daya motor 17,5 kW Ukuran (P x L x T) 1800 x 1100 x 1520 mm Berat 2600 kg Ketersediaan: segera Lokasi gudang: 63934 Röllbach Crjdpfx Ajwpm I Tsqxed