Kipas Angin Tidak Diketahui 2004

Unknown

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Nsdpfjvvkfdox Aahedf Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: bekas, Holz Her UNO 1303 + PU Ketebalan tepi 0,4 - 3 mm (6 mm) Panel kontrol dengan sakelar seleksi untuk pengaturan unit Majalah tepi otomatis untuk bahan roll dan strip Ndedsxlz Nzopfx Aahsf Stasiun aplikasi lem: cartridge + pengeleman PU Tinggi benda kerja 6-55 mm Unit penekan pneumatik Unit pemotong untuk bahan roll dan strip hingga ketebalan tepi 3 mm (6 mm) Dengan pengaturan sudut potong dari 0-10° Unit frais: frais rata, frais radius, frais chamfer - 15° Unit scraping untuk chamfer dan radius Unit scraping permukaan – finishing Mesin telah DICEK dalam KONDISI SANGAT BAIK dari bengkel yang sangat terawat Siap kirim dari stok Lieboch

Kondisi: bekas, 3231 Extraction System with Briquetting Press Spänex SHB 50 Used Complete disposal system for residual materials such as wood, paper, plastic, cotton, etc. The sawdust is conveyed directly from the filter unit into the chip bunker of the hydraulic briquetting press. After compression, the briquettes are transported directly to the heating system. Technical data according to manufacturer's brochure: - Output: 50 kg/h (depending on material) - Throughput: 0.45 m³/h - Briquette shape: octagonal, 125 x 70 mm - Motor power: 5.5 kW - Compaction ratio: 1:10 - Moisture content: min. 8%, max. 20% Sale on behalf of a customer, ex location near 69124 Heidelberg, without dismantling, transport, or installation. Dismantling, loading, and transport by us available as an option. Subject to errors in description and price. Njdpfxewqhwlo Aahodf To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as is. Technical data, condition description, year of manufacture, and scope of delivery as per manufacturer's brochure or previous owner, without guarantee. Interim sale reserved. For used machines, any warranty is excluded; the following applies: “purchased as inspected.” Pictures and videos are for reference only and do not represent the actual scope of delivery. Payment terms: Prices plus statutory VAT; payment prior to collection or dispatch. Delivery terms: ex location.

Kondisi: bekas, Tahun pembuatan: 1996, Ketebalan pinggiran: 0,4 - 12 mm Tepi gulungan: 3 x 45 mm atau 0,8 - 60 mm Lebar benda kerja minimum: 65 mm Panjang benda kerja minimum: 160 mm Ketebalan benda kerja: 10 - 55 mm Kecepatan maju: 13 m/menit Pramilling (penyambungan) Bak lem Quickmelt Unit pengelem Pemotongan Meratakan pinggiran Penyudutan pemotongan Perataan radius Penyalinan sudut Pisau penghalus rata Unit pemoles Dimensi mesin: 7450 x 1220 x 2400 mm Berat: 3000 kg Lokasi gudang: Nattheim Nsdpfxovvkd To Aahjdf

Kondisi: bekas, Tahun pembuatan: 2012, Control system: POWER CONTROL PC 20+ Panel height (mm): 60 PVC-ABS edge thickness (mm): 3 Solid wood edge thickness (mm): 12 Feed speed (m/min): 20 Upper motorized rubber conveyor belt Manual infeed guide Anti-adhesive unit Alignment unit Gluing with EVA adhesive Edge holder plate Ndodpfx Aajwwk Dujhof End trimming unit with automatic tilt adjustment Offset end trimming and corner rounding unit with two motors Linear 2-motor rounding unit Edge scraping blade Glue scraping blade Buffing unit

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Tipe: Mesin Edge Bander Satu Sisi Pabrikan: BRANDT Model: Optimat KDF 550 C Tahun: 2008 Lokasi: Lituania Ketentuan: apa adanya di lokasi Ketebalan papan: 60 mm Ketebalan edge: 8 mm Kecepatan feed: 11 m/menit Dimensi (P x L x T): 5860,0 × 1560,0 × 230,0 mm Bobot: 2600 kg Nsdpfxjxwwb Rs Aahedf Kecepatan feed: 11 m/menit Ketebalan benda kerja: 8 – 60 mm / ketebalan edge: 0,4 – 8 mm / tinggi kerja: 950 mm Catu daya listrik: 400 V – 3 fase – 50 Hz / tekanan pneumatik: 6 bar / tingkat kebisingan: 80…87 dB(A) Diameter ekstraksi: 1 × 120 mm / 2 × 100 mm / jarak antar rol: maks. 3.0 × 45 mm / 0.8 × 65 mm

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machine for gluing and processing straight panel edges using coil material (melamine, PVC, ABS, veneer) and strip material (solid wood, HPL, knife-cut veneers, etc.) • NC control with touchscreen display • Automatic start of unit motors. • Direct selection for second pass. • Production data acquisition. • Software-guided maintenance. TECHNICAL DATA Workpiece thickness: 10–60 mm Workpiece thickness with MFU unit (profile-dependent): 10–35/60 mm Edge height: 14–64 mm Edge thickness (coil material): 0.4–3 mm Edge thickness (strip material) (*): 0.4–10 (12) mm Workpiece overhang: 25 mm Minimum panel length: 140 mm Minimum width (at 140 mm length): 85 mm Minimum width (at 250 mm length): 50 mm Feed speed: 12 m/min Extraction*: 8x connection Ø100 mm Compressed air: 7 bar Glue pot capacity: approx. 2 kg * Depending on selected units. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge material to the workpiece, automatically cuts the edge from the coil, and presses it onto the workpiece, ensuring perfect positioning. - END TRIMMING UNIT IN-801 For trimming front and rear edge projections at angles from 0° to 15°. - 2-MOTOR MULTIFUNCTION PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made from synthetic materials up to max. 3 mm thickness. PRE-MILLING UNIT RT02 Prepares the workpiece prior to glue application. Equipped with two 1.8 kW high-frequency motors running at 12,000 rpm. SCRAPING UNIT RB02 For post-processing thick PVC/ABS edges. GLUE JOINT SCRAPER RC02 Unit for removing excess adhesive in the transition area between the edge and the panel. Equipped with tracing rollers and a flat knife with insertion control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using cloth polishing wheels. The unit automatically adjusts to the workpiece thickness. ANTI-ADHESIVE SPRAY SYSTEM ADZ02 Precision application of anti-adhesive via injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing via: - controlled monitoring of the glue roller - automatic retraction at feed stop - automatic ON/OFF of the gluing unit REVERSE system for switching the glue roller between forward and reverse operation. Electrical and mechanical preparation for use of special glue pots for POLYURETHANE adhesive in machines configured for EVA glue. Nodexzb Iiopfx Aahodf NC axis for the fine trimming unit Kit for automatic setting of tracing rollers and tools according to edge type and thickness. Adjustment is controlled via the operator interface. Pair of multi-profile cutters for fine trimming unit: 25-degree chamfer cutter, R=2 mm + R=1 mm, and straight profile for solid wood. NC axis for the profile milling unit Kit for automatic setting of the sensor according to edge thickness. Adjustment is controlled via the operator interface. Function for corner-only processing NC axis for the scraper unit Kit for automatic setting of tracing rollers and tools according to edge type and thickness. Adjustment is controlled via the operator interface.

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Biesse Akron 1400 Mesin Edge Bander. Mesin asli Inggris tersedia untuk demonstrasi: £10,000 + PPN Mesin ini cocok untuk pemangkasan rata atau miring pada bahan edging hingga tebal 8mm (maksimal 3mm pada roll). Saat ini mesin dilengkapi dengan pisau lurus, tetapi pisau kombinasi dapat dipasang untuk pemangkasan radius. Mesin ini TIDAK melakukan pembulatan sudut. Namun, dilengkapi dengan unit berikut: Pra-pemotongan. Sistem Lem Panas EVA. Gergaji pemotong ujung (potong lurus atau miring). Pemangkasan kasar (atas & bawah). Pemangkasan halus (atas & bawah). Njdpfxsxrwm No Aahodf Pengikis garis lem (atas & bawah).

Kondisi: bekas, lebar total: 1.000 mm, panjang total: 1.200 mm, tinggi total: 1.300 mm, 1 Ndedpfx Aasw Tzg Rshef

Kondisi: bekas, lebar total: 400 mm, panjang total: 600 mm, tinggi total: 800 mm, item-001 Ndjdew Tzadepfx Aahof