Mesin press tempa
VACCARI Schmiedelinie

Name: VACCARI Schmiedelinie
Brand: VACCARI
Availability: InStock

Kondisi

Bekas

Lokasi

Jerman

Data mesin

Nama mesin:: Mesin press tempa

Pabrikan:: VACCARI

Model:: Schmiedelinie

Kondisi:: diremajakan ulang (bekas)

Harga & Lokasi

Lokasi:: , Jerman

Hubungi

Rincian penawaran

ID iklan:: A22089008

Pembaruan:: terakhir pada 10.06.2026

Deskripsi

Automatic forging line / hot stamping plant

Installed at the end of 2015 following an overhaul and has been in excellent condition since, with less than 1,000 operating hours.
➢ ADIGE CM 500 AUTOMATIC SAW
➢ 50-KW INDUCTION FURNACE
➢ ELECTRONIC AUTOMATION SYSTEM
➢ VACCARI SPINDLE PRESS with 180 mm spindle diameter
➢ 10-POINT AUTOMATIC LUBRICATION SYSTEM
➢ BALCONI 50T TRIMMING PRESS

ADIGE CM 500 AUTOMATIC SAW WITH 3.5-METER AUTOMATIC BAR FEEDER
Technical Specifications:
- Min./max. cutting capacity: 8 mm / 60 mm diameter
- Standard cutting speed: ADIGE SALA
- Head motor power: (50 Hz) 2.2 kW
- Bar remnant at end equal to or shorter than the usable piece
- Central hydraulic tank capacity: 200 liters
- Cutting emulsion tank capacity: 50 liters
- Weight: approx. 1,200 kg
- Electrical components from Siemens

50-KW INDUCTION FURNACE WITH 1 INDUCTOR (8–20 mm) WITH ELECTRONIC LOADING ARM
For both horizontal and vertical loading of workpieces
Equipped with brushless motor, programmable axes, and press interpolation with electric axes; electronic components: Siemens
Load capacity: 4 kg; vertical lift: 80 mm; Power supply: electro-pneumatic

VACCARI SPINDLE PRESS 180 (spindle diameter)
Technical Specifications:
- Spindle diameter: 180 mm
- Theoretical press force: 300 tons
- Table dimensions: 430 x 550 mm
- Slide dimensions: 500 x 650 mm
- Ram stroke: 350 mm
- Distance between columns below guides: 450 mm
- Distance between columns inside guides: 350 mm
- Max. height between table and ram: 650 mm
- Strokes per minute: 35
- Table height under guides: 300 mm
- Main motor: 30 HP
- Machine dimensions: 4100 x 2600 x 2200 mm
- Approximate weight: 11,000 kg
NEW SIEMENS S7 CONTROL SYSTEM
NEW PNEUMATIC SYSTEM
NEW LUBRICATION SYSTEM

BALCONI 50T TRIMMING PRESS
Godpfxezcdluo Agrjiu
Technical Specifications:
- Press force: 50 tons
- Table dimensions: 800 x 500 mm
- Ram dimensions: 440 x 380 mm
- Max. die height: 400 mm
- Adjustable stroke: 100 mm
- Strokes per minute: 35–100
- Main motor power: 5.5 kW

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Dokumen

22089008-01.pdf

Penyedia

Terakhir online: minggu lalu

Terdaftar sejak: 2015

17 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 7851 ... iklan

Faks:

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Garis tekan mekanis Mossini 400 ton -98 Mossini PDM/2BX 400

Olofström

10.669 km

Garis tekan mekanis Mossini 400 ton -98
MossiniPDM/2BX 400

€62.000

EXW VB ditambah PPN

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 1995, nomor mesin/kendaraan: 0540/98, Fungsionalitas: berfungsi sepenuhnya, Fertigungsnummer: 0540/98. Baujahr: 1998. Giodpfx Aoicbbzjgrju Presskraft: 400 Tonnen. Hubweg: 300 mm. Hubzahl: 10–40 / min. Stößelverstellung: 300 mm. Einbauhöhe: 700 mm. Tischabmessungen: 1600 x 1300 mm. Eigengewicht: 45 Tonnen. Ständerdurchgang: 1600 mm. Außenmaße: 2 x 3 x 6 Meter. Steuerung: MEAB. Walzenricht- und Zufuhrgerät: iRON RNE 50B / 11. Abwickelhaspel: iRON SA6000, max. Bandbreite 700 mm.

Lihat detail

Iklan kecil

Eislingen/Fils

11.123 km

Tekan spindel
WEINGARTENPZ 220

Hubungi

Kondisi: bekas, Tahun pembuatan: 1962, Tekanan nominal 400 t Langkah 140 - 400 mm Jumlah langkah 24 - 36 /menit Jarak antara pilar 800 / 700 mm Jarak meja/ram, langkah besar atas, pengaturan atas 900 mm Luas meja 700 x 700 mm Luas ram 630 x 630 mm Diameter spindel 220 mm Daya penggerak 26,0 kW Berat 18,5 t Gjdpfxsvuud Uj Agrsiu Kebutuhan ruang (PxLxT) 1,85 x 2,5 x 4,3 m Hanya diizinkan untuk pembentukan panas Dengan transmisi roda gigi, alat satu/dobel pukulan, pengatur pukulan

Lihat detail

Iklan kecil

Jerman

11.023 km

Tekan hidrolik
WanzkeHVZ 160/S

Hubungi

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), Pressing force: 1600 kN, installation height: 750 mm, max. ram stroke: 500 mm, clamping area X/Y: 700 mm/600 mm, upright passage: 800 mm, side frame opening: approx. 450 mm. Distance from clamping plate to floor: 680 mm, ram bore diameter H7: 60 mm, rapid traverse down/up: 500/400 mm/s, max. working speed: 35 mm/s. Dimensions X/Y/Z: 2000 mm/1500 mm/3600 mm, weight: approx. 16,000 kg, control: Panelware. Documentation available. On-site inspection possible. Gedpfx Agjttbd Terjiu

Lihat detail

Iklan kecil

MESIN PRESS EKSENTRIK TIPE D 250 TON CRONOSSTECH D 250

Turki

9.668 km

MESIN PRESS EKSENTRIK TIPE D 250 TON
CRONOSSTECHD 250

Hubungi

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 250 t, lebar meja: 850 mm, panjang meja: 1.150 mm, lubang tembus di meja: 240 mm, penyesuaian silinder hidrolik: 150 mm, penyesuaian langkah: 160 mm, Perlengkapan: penghadang cahaya keselamatan, PRODUCTION LOCATION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief by vibration applied to main body and welded components - Table parallelism and perpendicularity tolerances conform to ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Slide guided by 8-way gibs - Ram with cushioning cylinder - Ram, connecting rod, and clutch parts, made of cast steel, GS52 - High-strength monobloc crankshaft – 4140 - Bronze bushings inside connecting rods (Zr14) - Rear flywheel - Spare bolster plate - Hydraulic overload protection - Motorized table-to-ram adjustment - Automatic central lubrication system - Pneumatic pedal with interlock and dual-hand control with timer - Electric counter - PLC control and touchscreen panel – DELTA - Electrical switchgear by SIEMENS-SCHNEIDER - CE conformity – OPTIONAL - Safety light curtains for finger protection – SICK, LEUZE - Safety PLC (controls all electric system, valves, double-hand and pedal) – PILZ - Double-coil safety valve – GPA, TOPAIR - Locked position limit switch and main panel - Safety block - Protective guards in compliance with CE standards MODEL: D-TYPE MONOBLOCK FRAME Capacity: 250 Ton Shut Height (Ram to Table Distance): 520 mm Clearance Between Side Frames: 1230 mm Ram Adjustment: 150 mm Approximate Width: 1600 mm Approximate Depth: 2100 mm Approximate Height: 3400 mm Table Bore Diameter: 240 mm Table Dimensions: 850 x 1150 mm Die Clamping Slot Diameter: 60 mm Ram Dimensions: 470 x 900 mm Table Height from Floor: 950 mm Giedpfx Agsvyr D Asrju Stroke Adjustment: 20 – 160 mm Strokes per Minute: 40 spm Main Motor Power: 22 + 2.2 kW Motor Speed: 1450 rpm Approximate Weight: 16,000 kg

Lihat detail

Iklan kecil

Gergaji bundar dingin GERD WOLFF GLS 160

Ennepetal

11.234 km

Gergaji bundar dingin
GERD WOLFFGLS 160

Hubungi

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 480 mm, Technical Details Capacity: Ø 30 - 160 mm Gisdpotrk S Nefx Agrsu Saw Head: 30 Degrees Linear Slide Saw Motor: 15 kW Hydraulic Motor: 3 kW Saw Feed Motor: 1.5 kW Siemens Saw Speed: 30-120 rpm Saw Blade Diameter: Ø480 x 2.25 x 2.7 x 50 mm Control System: Siemens Hydraulics: Rexroth Valve Coolant: Pulverized Cutting Oil Machine Weight, approx.: 5,550 kg Space Requirement, approx.: 3,200 x 7,600 mm

Lihat detail

Iklan kecil

Waldstatt

11.181 km

Mesin diecasting
BühlerEvolution B42D

€76.500

EXW VB ditambah PPN

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10380840, jarak antara tiang: 640 mm, diameter kolom: 125 mm, gaya ejektor: 150.000 N, lintasan ejektor: 145 mm, tinggi cetakan (min.): 300 mm, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, gaya penjepit: 4.200 kN, Mesin Die Casting Horizontal Merek: Bühler, Tipe: Evolution B42D, Tahun: 2004, Nomor seri: 10380940 Tinggi cetakan 300 - 700 mm Langkah pembukaan cetakan 640 mm Tekanan permukaan maksimum 100 N/mm² Ukuran penjepit minimum 500 x 500 mm Jarak antar kolom bebas 640 x 640 mm Diameter kolom 125 mm Langkah penyorong 145 mm Gsdpsyngv Tefx Agrsiu Gaya penyorong 150 kN Gaya penutupan maksimum 4200 kN Waktu siklus 30 s Kecepatan piston tuang 5,0 m/s Sudah termasuk sistem semprot cetakan Gerlieva GS 1200/1400Z Termasuk tungku penahan panas Westomat ProDos DPC 900 kg Termasuk robot pengambil ABB IRB 4600 M2004

Lihat detail

Iklan kecil

Mesin die casting ruang panas - Vertikal FRECH DAW 80S

Schorndorf

11.134 km

Mesin die casting ruang panas - Vertikal
FRECHDAW 80S

Hubungi

Kondisi: bekas, Tahun pembuatan: 2000, Clamping force: 900 kN Clamping plate: 540 x 540 mm Tie bar distance: 350 x 350 mm Machine weight: approx. 5.5 t Clamping stroke: 280 mm Ejector force: 60 kN Ejector stroke: 70 mm Mould height: 160–400 mm Tie bar diameter: 65 mm Injection force: 75 kN Injection stroke: 130 mm Injection plunger diameter: 50, 55, 60 mm Casting volume (DIN 24480): 119, 163, 214 cm³ Specific injection pressure: 380, 315, 265 kp/cm² Corresponding parting surface: 236, 285, 340 cm² Core pull stroke: 150 mm Completely overhauled die casting machine DAW 80 GO with DataLogic control for processing zinc alloys. Partial extract of the general overhaul: • Upgrade of the machine with a new control cabinet and new operator panel, including replacement of all electrical wiring Godpfx Ageyzt D Eorjiu • Renewal of hydraulics (blocks and valves) • Overhaul of the clamping unit (Detailed list available on request) The machine is equipped with the following options: • Motorised safety door, injection side left • Discharge chute cover on base frame (straight) • Standing operator panel • Discharge chute cover on base frame • Multi-chamber holding and melting furnace with TOC pump • Furnace control cabinet for furnace type Z • Use of water-glycol • Side GO • Wired signal interface for part removal (DISPO10) • RSD equipment package with switch • Spraymotion 611 E with servo drive, single-circuit • Release agent container TD 20 • Spray bar CR 275 Additional options are available on request.

Lihat detail

Iklan kecil