Penghancur kayu

Vecoplan 55/18/3

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 4.600 mm, jarak lintasan sumbu Y: 1.935 mm, jarak gerak sumbu Z: 275 mm, jumlah sumbu: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X = 4600 mm, Y = 1935 mm, Z = 275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip removal, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 machine, which we are offering for sale. Contact us for further information. Worktable and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of the panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working zones in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), pneumatic system • 4 removable central stops, stroke 140 mm (2 left + 2 right), pneumatic system • Sensor for detection of lowered stops • Pneumatic system for lifting rod supports • 6 lifting rod supports for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum system Processing Units and Configuration • Configuration C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis processing unit • Flange for mounting units on a 5-axis interpolating machining head (units can only be used when the electric spindle is vertical) • Configuration C3-P2: • Additional Z-slide for rear processing units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment Fsdpex D H Hcofx Aclogd • Additional overhauled 5-axis main spindle available • Conveyor belt for removing chips and scrap parts (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical data and descriptions are taken from the original order confirmation and are for information purposes only; they are not binding.

Kondisi: bekas, 3176 Planer and Moulder WEINIG Hydromat 1000 Used, Year of manufacture: 2007 6 spindles: bottom - right - left - top - top - bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Fjdpfx Asu Agh Sjcljgd Working height: 23 - 65 mm Lamella finished width: 4 - 15 mm Max. number of lamellae: 16 pieces Lamella lengths: 400 - 4,000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6,000 rpm Spindle diameter: 45 mm Tool diameter: 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle vertical left 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top 15 kW, 6,000 rpm, diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle Brake motor 37 kW, 5,000 rpm Diameter: 45 mm Axial adjustment reduced to 25 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle Brake motor 30 kW, 5,000 rpm Axial adjustment reduced to 25 mm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm All moulding spindles with high-performance bearings Electronic feed 7.5 kW Feed roller adjustment relative to left spindle, axial 35 mm Shortened roller spacing relative to right spindles Linear meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 powered rollers over table 1 powered, serrated roller in the table, side pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 powered, serrated rollers in outfeed table 2 powered, serrated rollers in the machine table Pressure beam before and discharge after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electric height adjustment for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex site near South Tyrol, without transport and installation Description and price subject to change Transport and loading by us optionally possible To avoid possible misunderstandings, inspection on site by appointment is possible and recommended Sale is as-is Technical specifications, condition description, year of manufacture, and delivery scope as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; it is sold as seen Images and videos serve as examples and do not constitute the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipment Delivery terms: ex location

Tahun pembuatan: 2001, Kondisi: hampir baru (bekas), Dual-aggregate sander, two lower aggregates, each with 2 x 7.5 kW main power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished; the conveyor belt is in very good condition. Fitted with a new graphite pad. The machine features two bottom-mounted aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width: 630 mm. Two feed speeds: slow and fast. Sanding belt length: 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt feed speed: 9/20 m/min. Number of sanding pads: 1. CE conformity declaration. Rated total power: 21 kW. Max working height: 160 mm. The machine is equipped with two lower working rollers. Conveyor belt with upper feed system. Fedpjfxpbmsfx Aclsgd

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Double tenoning machine and double drilling machine, step-by-step operation Equipped with: 1+1 saws 1+1 milling units Fodpfx Ajw A A E Ioclegd 1+1 drilling units Maximum working length: 2500 mm

Kondisi: siap digunakan (bekas), Four-sided planer / construction timber planer Maximum width: approx. 55 cm Maximum height: approx. 14 cm Fgsdpfx Acsw Dn Uqjled Immediately available Location: Austria, near Grieskirchen

Kondisi: sangat baik (bekas), panjang total: 3.000 mm, lebar total: 1.500 mm, Press panel dalam kondisi kerja sangat baik + finger jointing Grecon Fjdpfx Acst Uduxelogd

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: W230-028, gaya penekanan: 80 t, masa garansi: 24 bulan, tekanan: 250 batang, daya: 45 kW (61,18 hp), tahun perombakan terakhir: 2024, Perlengkapan: dokumentasi / manual, This fully refurbished baler is offered for sale by Bollegraaf Recycling Solutions. The machine in question is an HBC80 baler (45kW) with vertical tying. This baler has been completely refurbished in our dedicated refurbishment workshop. The refurbishment has been performed in accordance with the stringent Bollegraaf OEM Refurbishment Guidelines. Fjdpetvat Tsfx Aclegd Following refurbishment, this baler is sold with a 2-year warranty included. The press is supplied with the following options: * support frames, * intermediate hopper, * bale exit chute, * wire spool platforms.

Kondisi: baik (bekas), Mesin terdiri dari dua unit dan memiliki fungsi sebagai berikut: 1. Mengebor lubang untuk pasak 2. Milling pasak 3. Injeksi lem 4. Memasukkan pasak Sistem lem sepenuhnya dibersihkan; Laser pemposisian; Kami dapat mengirimkan video tentang cara kerja mesin. Waktu proses hanya sekitar 3 detik/siklus. Anda dapat menghubungi kami melalui telepon atau pesan tertulis. Kami dapat berbicara dan menulis dalam bahasa Jerman dan Rusia. Anda juga dapat mengirim pesan dalam bahasa Inggris. 5.3.4 Fedpfxotpqafj Aclegd

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 155423, berat keseluruhan: 4.707 kg, jenis bahan bakar: diesel, kapasitas tangki: 597 l, warna: merah, daya: 400 kW (543,85 hp), tegangan keluaran: 400 V, frekuensi keluaran: 50 Hz, jenis arus keluaran: tiga fasa, daya nominal: 400 kW (543,85 hp), daya nominal (semu): 538 kVA, daya kontinu: 400 kW (543,85 hp), daya semu kontinu: 538 kVA, panjang total: 4.100 mm, lebar total: 1.600 mm, tinggi total: 2.200 mm, kecepatan rotasi (maks.): 1.500 rpm, produsen motor: FPT/Iveco, jenis pendinginan: air, konsumsi bahan bakar (gabungan): 100,6 l/100 km, konsumsi bahan bakar (perkotaan): 51,5 l/100 km, konsumsi bahan bakar (luar kota): 70,63 l/100 km, bahan bakar: diesel, kapasitas tangki bahan bakar: 597 l, kapasitas baterai: 100 Ah, tegangan baterai: 12 V, tegangan masuk: 12 V, frekuensi input: 50 Hz, arus masuk: 32 A, suhu operasional: 25 °C, suhu lingkungan (min.): -25 °C, suhu lingkungan (maks.): 45 °C, tinggi kabinet kontrol: 2.200 mm, panjang kabinet kontrol: 4.100 mm, lebar kabinet kontrol: 1.600 mm, jenis perlindungan (kode IP): IP65, kecepatan rotasi (min.): 1.500 rpm, suhu: 25 °C, jenis arus masuk: tiga fasa, masa garansi: 12 bulan, Perlengkapan: dokumentasi / manual, tangki solar portabel, The Bredenoord 500 KVA generator is a reliable and versatile solution for both temporary and long-term power requirements in a variety of environments. This genset is ideal for mobile use and complies with current emission standards. The efficient FPT/Iveco engine, combined with a Stamford alternator, ensures excellent performance and low operating costs. The generator is housed in a sound-attenuated enclosure that minimizes noise emissions, making it ideal for use in noise-sensitive areas (super silent execution). The enclosure features thick, oil-resistant acoustic insulation and external power sockets with circuit breakers for enhanced safety. With a 597-litre fuel tank, the generator offers up to 6 hours of autonomy during continuous operation. It is compatible with diesel, HVO, or GTL fuels, providing flexible fueling options. Technical Specifications: - Model: Bredenoord 500KVA - Rated power: 538 KVA - Maximum power: 538 KVA - Engine: FPT/Iveco C13TE7 - Alternator: Stamford brushless (AVR) - Power range: 220–538 kVA - Voltage: 230/400 V, 50 Hz - Speed: 1,500 RPM - Sound level: 80 dB(A) at 7 metres - Fuel tank capacity: 597 litres - Autonomy: - 100% PRP: 6 hours - 70% PRP: 8 hours - Engine output: 400 kW - Battery charger and engine pre-heater: Standard - Control panel: Comap MRS16 (auto start/stop) - Dimensions (L x W x H): 4.10 m x 1.60 m x 2.20 m - Weight: 4,707 kg - Emission class: Fuel Consumption: - 100% PRP: 100.6 L/h - 70% PRP: 70.63 L/h - 50% PRP: 51.5 L/h Options: - Engine heater - Battery charger Fjdpfxewgkrkj Aclogd - 3-way fuel valve - XXL fuel tank Sound Attenuation: The generator is engineered with optimised air intakes and special insulation materials to minimise noise. The acoustic insulation is reinforced with wool of various densities to reduce sound across a broad frequency spectrum, making it ideal for use in noise-sensitive environments. Durability: The enclosure is corrosion-resistant due to a coating tested for more than 2,000 hours (C5I-H), ensuring a long service life even under the most challenging conditions. Safety: The generator features reinforced locks and stainless-steel hinges. The doors are designed with a 20-degree bevel to prevent water accumulation and minimise oxidation. Transport and Handling: The generator is easy to move thanks to reinforced lifting eyes and steel beams, ensuring straightforward handling on construction sites. The design guarantees stable and secure transportation without the risk of damage. Customisation: The Bredenoord 500 KVA generator is available in various versions, from 20 KVA up to 600 KVA. Customer-specific adaptations are possible to meet particular requirements and applications. Certifications: - CE certified - Manufactured in Europe Applications: This generator is suitable for a wide range of sectors, including construction, industry, and any application requiring reliable and efficient power supply.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, For sale: used Rilesa Unix drilling machine Fedpfx Aou Shx Doclsgd - 4 top drilling units - 4 rear drilling units - Right and left operation