Meluruskan dan memotong mesin

VITARI NR 10

Tahun pembuatan: 1985, Kondisi: bekas, de-en-20240620-01 Lrjdpetzdyzsfx Adnoh

Kondisi: diremajakan ulang (bekas), SCHLATTER MG24 Welded Wire Mesh Production Line Completely Refurbished WORKING RANGE Panel width: max. 2,500 mm Cross wire length: min. 900 mm Cross wire length with QF5 distributor: min. 300 – 1,600 mm Maximum spacing between outer longitudinal wires: 2,400 mm Mesh length (longitudinal wire length): max. 2,500 – 6,000 mm Minimum spacing between longitudinal wires: 100 mm Cross wire spacing: 25–250 mm Adjustable via cutting device (0–1) Longitudinal wire diameter: 4.0 – 12.0 mm Cross wire diameter: 4.0 – 12.0 mm Maximum number of longitudinal wires: 24 MG 24.1/8C MESH WELDING MACHINE – Basic configuration including: - 1 Machine base frame - 1 Upper support for reception of press units, continuously adjustable by handwheel - 1 Magnetic support unit with holding magnets and cross wire monitoring - 1 Row of pneumatic solenoid valves for operation of the press units - 1 Air and water installation - 2 Pneumatic rotary drives with oil damping - Static torque with 5 bar compressed air: 480 Nm - Continuously adjustable front section: 25 – 250 mm, adjustable via cutting device (0–1) - 1 Feed trolley with panel lifting device - 1 Tool kit for machine adjustment WELDING SECTION including: 8 Type C transformers Rated power per transformer: 100 kVA Secondary open-circuit voltage: 7.1 V Rated secondary current: 14 kA 8 ES 130 thyristor contactors 12 Welding presses: 5.0 kN 12 Longitudinal wire current bridges for wire spacing: 50–100 mm 12 Longitudinal wire current bridges for staggered wires: 100 mm 10 Longitudinal wire current bridges for wire spacing: 100–150 mm 8 Longitudinal wire current bridges for staggered wires: 150 mm 6 Longitudinal wire current bridges for wire spacing: 150–200 mm 6 Longitudinal wire current bridges for staggered wires: 200 mm 24 Bottom copper electrode holders with standard angled electrodes, each with a water-cooled current cable, width: 58 mm 24 Wire clamping jaws Panel width: max. 2,500 mm Lrsdpfx Adjwu Tu Djnoh Cross wire length: min. 900 mm Cross wire length with QF5 dispenser: min. 300 – 1,600 mm Max. spacing between outer longitudinal wires: 2,400 mm Mesh length (longitudinal wire length): max. 2,500 – 6,000 mm Min. spacing between longitudinal wires: 100 mm Cross wire spacing: 25–250 mm Longitudinal wire diameter: 4.0 – 12.0 mm Cross wire diameter: 4.0 – 12.0 mm Max. number of longitudinal wires: 24

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, We offer for sale a complete multi-point automatic steel wire welding line by SCHLATTER. Lrsdpetvpilefx Adnoh We have three fully operational production lines available. Automatic machines for the production of cross wires (so-called straightening and cutting machines) are also available. Additionally, we stock a range of single spot welders for steel wires.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, Maximum wheel diameter: 100 mm Wheel width: 26 mm Module – max.: 3 Module – min.: 0.1 Lsdsv Ehbbspfx Adnsrh Control: Siemens 840 D SL Operating hours: 9,598 h Total power requirement: 45 kW Machine weight: approx. 7 t Space requirement: approx. 4 x 3 x 2.5 m Gleason 100S Gear Shaping Machine For manufacturing cylindrical gears with internal and external teeth, as well as other regularly recurring profiles and shapes on cylindrical workpiece surfaces, including profiling in single-part processes. Technical Data: Nominal workpiece diameter: 100 mm Maximum outside diameter: 150 mm Nominal machine module: approx. 3 mm (Reference value, depending on the specific machining task.) Shaping spindle stroke range: 0–3,000 strokes/min Manual stroke position adjustment range: 20 mm Maximum gear width: 26 mm Minimum hydrostatic diagonal guide pitch height: 400 mm Minimum/maximum distance between tool and workpiece axis: -20 / +180 mm Machine column tilt range (manual): -1° / +11° Tool holder (manual clamping): HSK-D63 (Hollow shank taper according to DIN 69063) Machine weight: approx. 7,000 kg With robot cell

Kondisi: bekas, Tahun pembuatan: 1988, jam operasional: 1 h, nomor mesin/kendaraan: V 516, lebar total: 2.000 mm, panjang total: 7.000 mm, tinggi total: 1.800 mm, tekanan kerja: 300 batang, gaya penekanan: 90 t, tebal plat aluminium (maks.): 5 mm, daya: 11 kW (14,96 hp), berat kosong: 16.000 kg, gaya potong: 90 t, tahun perombakan terakhir: 2025, Package dimensions: 400x400 mm Pressing force, stage 1: 900 kN Pressing force, stage 2: 900 kN Steel throughput: 2,500–3,500 kg/h Aluminum throughput: 2,000–3,000 kg/h Drive power: 11 kW Installation area: 7 x 2 x 2.5 m Lsdpfx Aolhqd Rjdnerh Machine weight: 16 t With wheels or with oil drip tray Location: Austria Available from: 30.01.2026

Tahun pembuatan: 1972, Kondisi: bekas, nomor mesin/kendaraan: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram area: 180 x 475 mm Ram adjustment: 80 mm Lrjdpfx Aeb Tdquodnjh Stroke adjustment: 16 - 140 mm Strokes per minute: 90 /min Drive motor: 380 V, 3 kW Space requirement: 1700 x 1200 x 2500 mm Weight: 3.3 t

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 288, Entrindungsmaschine mit Einlaufband, geeignet für maximale Stammdurchmesser von entweder bis zu 460 mm oder 600 mm, Vorschubgeschwindigkeit bis zu 100 m/min, ausgestattet mit Reduzierrotor und Entrindungsrotor. Der Entrindungsrotor mit einer Öffnung von 620 mm ist NEUPRODUZIERT und wird mit Garantie geliefert. Inklusive Vorrichtung zum Wechseln des Reduzierrotors. Auf den untenstehenden Fotos ist der aktuelle Zustand im demontierten Zustand zu sehen. Lieferzeit beträgt ca. 3 Monate ab Bestellung. Ljdetk N Dkopfx Adnorh

Kondisi: bekas, Tahun pembuatan: 2026, jam operasional: 15 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 204065, Used machine: CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system utilizing CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a powered rotary knife, electrically oscillating knife, and a milling unit (including extraction device) • Multifunctional tool head accommodates up to 2 interchangeable tools • High-performance vacuum blower to secure materials • Standard configuration features a grey conveyor belt table. (Conveyor) Green-blue replacement conveyor available (provides high contrast for dark materials) Further expandable tooling options (on request): • EOT electrically oscillating knife • POT pneumatically oscillating knife • PRT powered rotary knife • UCT universal knife (drag knife) • KCT kiss-cut tool • CTT creasing tool • V-Cut angle cutting knife • Printed mark recognition • Camera registration • Punch tool for notches or holes • Milling unit with extraction device Lredpeif Ek Refx Adnjh User-friendly • Easily exchangeable cutting tools, "PLUG & CUT" • Intuitive user interface • Easy blade changes • Vacuum zones easily activated with one click Fast return on investment • Low costs with high added value • Optimal material utilization through nest expert software modules (not included in standard package) • High speed • Consistent precision Specifications: • Short cutting times due to high positioning speeds up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet and roll materials (can be upgraded with suitable unwinder) • Fast return on investment (Product image for illustration purposes) The machine is CE certified.

Tahun pembuatan: 2006, Kondisi: hampir baru (bekas), Contenitore con volume di 32 m³ Lsdpfx Ajfhb Tksdnjrh

Kondisi: hampir baru (bekas), DATI DELLA MACCHINA TORNI TACCHI Modello FTC 51 DIMENSIONI GENERALI Lsdpfx Adsd Tm D Eonsrh Distanza tra le punte: 4.000 mm Altezza: 1.550 mm Larghezza: 1.400 mm Lunghezza: 6.200 mm Peso: 10.000 Kg Diametro tornibile sul banco: 1.120 mm Diametro tornibile sul carro: 810 mm Diametro tornibile sull’incavo: 1.350 mm Foro mandrino: 123 mm Numero velocità: 18 Gamma velocità: 7-550 giri/min Potenza motore: 25 HP Attacco conico Morse N° 6 Filettature: metriche – pollici – modulo – passo Mandrino autocentrante 3 griffe: 450 mm Piatto: 850 mm Piatto supplementare: 1.420 mm In buone condizioni