Lift SA400 dengan RM40

voran SA400

Tahun pembuatan: 2019, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10038241 / 147300000G M0009906E/07/00007, Voran inclined conveyor SA 400 with RM 75 USED Subject to prior sale! Fpjdpfotqdnljx Am Ssh

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, masa garansi: 3 bulan, Tersertifikasi DGUV hingga: 07/2027, jenis arus masuk: AC (pendingin udara), panjang total: 440 mm, lebar total: 800 mm, tinggi total: 470 mm, frekuensi input: 50 Hz, tahun perombakan terakhir: 2025, lebar sabuk konveyor: 160 mm, kebutuhan tinggi: 470 mm, persyaratan ruang panjang: 440 mm, lebar yang dibutuhkan: 800 mm, aufschneidegeraet_kleingebaeck_20240612 Fsdpfx Amstpl Uke Ssph

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, We offer a Cabinplant snack packaging line manufactured in 2018, comprising the following equipment: - Single-lane elevator Fpodpfx Ajpxm Ugem Seh - Three-lane elevator - 24-head combination weigher with 1L hoppers - 32-head combination weigher with 1L hoppers - KEN Hygiene System EWD 50 (washing station for auxiliary weigher components) - Platform with stairs - Distribution tool – 2 units - Multivac R245 Type ASE 500, gas, vacuum (without vacuum pump) The set has only been used for equipment testing and has approximately 100 operating hours. The line has been professionally disassembled by authorized Cabinplant and Multivac service teams.

Kondisi: baru, Klanke Supercut roll splitter for efficient shredding of waste rolls. Features: - Automatic safety interlock - Emergency stop pull cord - Siemens PLC Fpedpfxon I Rgpe Am Seh Technical specifications: Blade length: 3000 mm Cutting channel opening: 1200 mm Motor power: 15 kW Cutting force: 50 t Made to order Price and further information upon request. We would be pleased to provide you with a non-binding offer.

Kondisi: sangat baik (bekas),

Tahun pembuatan: 2026, Kondisi: baru, Washing line for fruit and vegetables. The unit is constructed entirely from stainless steel. It features a sorting grid, washing tank, and conveyor belt. The fruit drops into the water and, after pre-washing, is conveyed by the belt where it is thoroughly cleaned with fresh water. The cleaned produce is then transferred to the mill, where various sieves can be used to achieve the desired mash consistency. The washing line is equipped with a dosing attachment for packing presses. Technical data: • Rated output: 1,500 kg/h • Power requirement: 3 kW, 400 V, 16 A Fodstu Ikcopfx Am Sjph • Material: Wnr. 1.4301, AISI 304 stainless steel • Washing tank water capacity: 120 L/shift • Water consumption: 12 L/min • Water connection: 3/4” quick coupling • IP65-rated electrical control box • Pivoting grater mill • Fitted with mobile castors • Easy to clean • Through the frequency converter, the conveyor throughput can be easily adjusted Dimensions: Length: 3,250 mm Width: 840 mm Height: 2,270 mm Weight: 200 kg

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, tahun perombakan terakhir: 2025, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors. Fsdpfxevf E Avo Am Ssph

Kondisi: bekas, CNC cycle-controlled lathe HARRISON Alpha 400 Plus Machine No. P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Swing in gap: 585 mm Fpjdpfx Ameh Hvk Ae Ssh Bed width: 313 mm Cross travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock quill taper: MT 5 Spindle bore: 54 mm Spindle nose size: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed range (Step 1): 15-275 rpm Spindle speed range (Step 2): 35-795 rpm Spindle speed range (Step 3): 110-2500 rpm Feed rate X and Z: 0.03 - 0.6 mm/rev. Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 V, 50 Hz, 23.5 kVA - Cycle control Harrison Alpha / GE FANUC – language in French (France) - Automatic gearbox range switching in 3 steps (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with various scaling factors (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set soft top jaws - MULTIFIX quick-change toolpost size B with 2 holders - 1 live center - 1 quick-release drill chuck RÖHM, 3-16 mm - Hinged chuck guard - Hinged work area safety doors - Chip tray with coolant device under the machine bed - Control cabinet attached to the machine - RS 232 interface Required floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg good condition

Kondisi: baru, Tahun pembuatan: 2026, Bag-in-Box Dosing Machine EF 600-NG – for filling fruit juices, wine, vinegar, oil, etc. Fsdpjt U Iiyefx Am Soph * High-quality stainless steel housing * User-friendly display showing key information (current flow rate, remaining quantity, etc.) * Preset volumes: 1.5, 3, 5, 10, 20 litres * Freely adjustable filling volumes * Cleaning program * Comprehensive statistics * Minimal downtime thanks to dual mounting * Compact design

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, berat keseluruhan: 150 kg, tegangan masuk: 400 V, suhu: 90 °C, kapasitas tangki: 140 l, jenis penyesuaian ketinggian: mekanis, pasteurizer_PW-01_tech_specs Fpjdpjtyvvmjfx Am Seh