Penghancur kayu

Votecs EZ 10-2

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Penghancur putaran lambat dengan motor kuat 45 kW. Ideal untuk kabel, plastik, dan palet. Lebar rotor 1000 mm, diameter rotor 368 mm. Dilengkapi dengan 56 pisau besar berukuran 40 x 40 mm. Motor 45 kW. Dapat dibeli dengan atau tanpa konveyor naik (dengan magnet overband). Ppjdpeykzy Esfx Abxjp

Kondisi: bekas, Tahun pembuatan: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained and ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, thus featuring a reinforced gearbox and reinforced cutting frame. — Features / Scope of delivery: - 1 set armored shafts HW 8/10 with combs and re-breaking bar, suitable for scrap and waste - 1 set used shafts HW 8/10 with combs and re-breaking bar, likewise for scrap and waste - DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Ppodpex Nkhqofx Abxjp Year of manufacture: 2021 Operating hours: 7,230 Engine power: approx. 566 kW (approx. 770 hp) Emission standard: Stage V / Tier 4f (depending on configuration) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Undercarriage: tracked, hydraulically driven Areas of application: scrap, commercial waste, bulky waste, mixed waste, wood, recycling materials — Condition: - Well-maintained machine - Fully functional - Sale as inspected on site Additional Information / Service History The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work was carried out professionally according to the manufacturer's specifications and documented. Notes: • Sale is made excluding any warranty or guarantee. • No return or renegotiation. • Subject to prior sale. All information is provided without guarantee. The seller assumes no liability for possible errors, incompleteness or changes to the information provided. Sale is made exclusively subject to prior sale.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jam operasional: 1.800 h, berat keseluruhan: 3.000 kg, diameter rotor: 360 mm, panjang rotor: 1.000 mm, daya: 45 kW (61,18 hp), Hacker ideal untuk menghancurkan palet, kabel, plastik, dll. Dilengkapi dengan konveyor naik dengan rol magnet untuk memisahkan paku. Juga cocok untuk plastik berkat motor kuat 45 kW. Dilengkapi dengan pendorong hidrolik. Lebar rotor: 1000 mm Diameter rotor: 360 mm Podpfsw Td S Nox Abxepp Motor: 45 kW 56 pisau pada rotor Harga baru sekitar €80.000!

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, de-to-hu-01 Podpfx Ashhnbljbxepp

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, daya: 160 kW (217,54 hp), tegangan masuk: 380 V, masa garansi: 12 bulan, tahun perombakan terakhir: 2023, Perlengkapan: dokumentasi / manual, 1 Pellet press brand: Buhler DPAB Die inner diameter: 660 mm Die running surface: 138 mm Press is equipped with 1 motor, 160 KW. Press door is made of stainless steel and features an overload flap in the door. 2-roller pellet press with 2 rollers on the press, overhauled in either a dimpled or grooved design. Press is complete with die lifting device and tools included. Ppodpfx Aborah Evjxop The press has been fully refurbished and fitted with new bearings and wear parts, such as front and rear scrapers, die retaining ring, etc. Also fitted with new V-belts. All safety requirements will be observed and suitable switches for friction protection, door safety switch, and inspection hatches will be installed.

Kondisi: baik (bekas), Tahun pembuatan: 2014, Pelletpresse Hersteller – TEKNO UNO Modell – TK 304 Baujahr – 2014 Motorleistung – 50 kW Kapazität – 450 kg/h Ppjdpovdrtxjfx Abxjp

Kondisi: bekas, Tahun pembuatan: 2003, jam operasional: 10.120 h, panjang total: 1.800 mm, tinggi total: 1.700 mm, lebar total: 1.200 mm, de-hu-001 Psdpfswh Na Nox Abxjpp

Kondisi: bekas, Tahun pembuatan: 2017, Number of spindles: 5 pcs Ppjdpfx Abjwwl Nlsxsp Working width: 240 mm Planing height: 120 mm Surfacing table length: 2,500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Weight: approx. 3,500 kg Control system: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully inspected. Short summary: ----- - 5 spindles - Powerful motors - Left and top spindles motorized for width and height adjustment - With workpiece return to the operator 1st Spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd Spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system 3rd Spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic horizontal positioning / motorized width adjustment 4th Spindle ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic radial positioning / motorized height adjustment 5th Spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return Including available used cutterheads (Technical specifications according to manufacturer – no guarantee!)

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, daya: 37 kW (50,31 hp), berat keseluruhan: 5.200 kg, large shredder, ideal for pallets or similar materials built like a tank, weighs 5 tonnes rotor width: 1300 mm Psdsu Apkispfx Abxopp motor: 37 kW feed stroke to rotor: approx. 1.3 m with discharge auger

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10006565, Weinig Powermat 1500 Working width: 30 - 310 mm (with tool flying circle 93-125 mm) Working height: 100 - 200 mm (with tool flying circle 93-125 mm) Number of spindles: 6 Bottom spindles: 2 Right spindles: 1 Left spindles: 1 Top spindles: 2 Spindle arrangement: bottom-right-left-top-top-bottom Maximum spindle speed: 8,000 rpm Spindle diameter: 40 mm Powerlock tool holder Including beveling unit Separate motor for each spindle Electronic feed including brake, steplessly adjustable 5-40 m/min Durofer pointed-tooth feed rollers Short infeed table, 1.2 m long, with 2 powered rollers above the table Machine table surface with hard coating Manual lubricant pump WEINIG Comfort Set Control system: WEINIG MEMORY PLUS-SYSTEM CE marking Declaration of conformity Pedpfxorq Ebfo Abxjpp