Beli Ema 201 bekas (5.476)

Tahun pembuatan: 1993, Kondisi: sangat baik (bekas), Maximum positioning length: 2600–3000 mm Itodpfofibfnjx Akpeh Stop and measuring system with E 255 control unit for positioning of cutting lengths Suitable for mounting on all single-head (right) saws

Kondisi: bekas, de-to-multi-001 Itedpfxjywxwpe Akpeh

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 09/2026, panjang ruang muatan: 7.300 mm, Tahun pembuatan: 2018, Perlengkapan: unit pendingin,

Kondisi: bekas, berat muatan maksimum: 211 kg, berat keseluruhan: 850 kg, konfigurasi gandar: 1 as, pendaftaran pertama: 03/2026, panjang ruang muatan: 2.070 mm, lebar ruang muat: 1.080 mm, lebar total: 1.495 mm, tinggi total: 1.150 mm,

Kondisi: bekas, berat muatan maksimum: 630 kg, berat keseluruhan: 750 kg, konfigurasi gandar: 1 as, pendaftaran pertama: 03/2025, panjang ruang muatan: 2.070 mm, lebar ruang muat: 1.145 mm, tinggi ruang muatan: 330 mm, lebar total: 1.495 mm, tinggi total: 870 mm,

Kondisi: bekas, berat muatan maksimum: 211 kg, berat keseluruhan: 850 kg, konfigurasi gandar: 1 as, pendaftaran pertama: 03/2026, panjang ruang muatan: 2.070 mm, lebar ruang muat: 1.080 mm, lebar total: 1.495 mm, tinggi total: 1.150 mm,

Tahun pembuatan: 2018, Kondisi: sangat baik (bekas), Aluminum inclined conveyor belt incl. substructure Dimensions: 4000 x 460 x 1000 / 1700 mm Construction: height-adjustable Belt width: 400 mm PVC conveyor belt incl. carriers and wave edge (NEW) Construction prepared for installation of overhead magnetic separator. Permanent overhead magnetic separator, type PM1200 Manufacturer: die magnetprofis L x W x H: 1200 x 550 x 200 mm Magnetic zone: L 700 mm x W 250 mm Gear motor: 0.22 kW Iedpfx Ajd Dza Askpjth Internal bearing lubrication for 10,000 operating hours Protection class: IP-55 * incl. new bearings, new conveyor belt

Tahun pembuatan: 2017, Kondisi: diremajakan ulang (bekas), Magnetic drum / conveyor belt replacement roller Magnetic flux density: approx. 3,600 Gauss V2A (stainless steel) housing hermetically welded. Ø 320 x 1,220 mm Itjded Dzc Uopfx Akpjh Shaft length: 1,790 mm Shaft Ø 60 mm Keyway 150 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, gaya penjepit: 3.500 kN, diameter sekrup: 60 mm, jarak antara tiang: 720 mm, volume langkah: 763 cm³, tekanan injeksi: 1.905 batang, berat injeksi: 695 g, tinggi cetakan (min.): 350 mm, berat keseluruhan: 15.540 kg, pl-en-001 Isdpfx Aszcnm Njkpoth

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Complete solution for the transport of bulk materials such as shredded material, wood chips, wood pellets, granulate, etc. Aluminium angle conveyor belt incl. substructure Horizontal section: 2,500 mm (customizable) Inclined section: 5,000 mm (customizable) Bend angle: 35, 40, or 45° Infeed height: horizontal (customizable) Discharge height: individually adjustable Construction: height-adjustable (mobile) Conveyor belt width: 500 mm (customizable) We supply our conveyor belts in PVC, PU, felt, or rubber. PU conveyor belt incl. cleats and wave edge Drive: Motor 1.1 kW (customizable), speed approx. 0.3 m/sec Connection: 220/240V, 50Hz, protection rating IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wave edge: 50x25 mm T-50 cleats - 400 mm pitch 2-ply, particularly laterally stable Fixed mounted overbelt magnet separator: Permanent overbelt magnet separator TYPE PM1200 Manufacturer: die magnetprofis GmbH & Co. KG L x W x H: 1,200 x 550 x 200 mm Magnetic L: 700 mm, W: 250 mm Gear motor: 0.37 kW We always have various such systems in stock. The delivery time for a customized system is currently about 2-3 weeks depending on production requirements. Our core competency is to supply the customer exactly what they truly require. We work together with our customers to develop tailor-made, individual solutions and deliver corresponding systems from our own production. Iedpfxei Igdfj Akpeth Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overbelt magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overbelt magnet, magnetic belt separator

Tahun pembuatan: 2019, Kondisi: seperti baru (mesin pameran), Aluminum incline conveyor belt 35° including supporting frame Ijdpfx Akod Dzddspeth Dimensions: 1500 + 3055 x 400 mm * Optional with magnetic deflection roller at the end of the conveyor belt. * Custom designs available in all configurations.

Tahun pembuatan: 2022, Kondisi: baru, Aluminum flat conveyor belt with substructure Dimensions: approx. 4000 x 300 mm Aluminum frame construction Itsdpfeht U H Hex Akpjh Full-surface support sheet Drive: Gear motor 0.18 kW GEMOTEG Connection: 220/400V, 50Hz, protection class IP54; motor control unit optional 4 adjustable machine feet for leveling, conveyor belt top edge height 400 mm PVC conveyor belt EM 10/2 0+12 PVC, green, hard cover Endless welded with staggered finger splice Fabric ply, green Carrying side equipped with 12 centrally welded PVC cleats T40, pitch approx. 508 mm Carrying side with 2 fabric-reinforced, green wave edge profiles, welded flush with the edges, approx. 40 mm high, approx. 35 mm wide Arrangement: transverse +35-5+220-5+35mm

Tahun pembuatan: 2019, Kondisi: seperti baru (mesin pameran), Aluminium flat conveyor belt including 4 suspension points Dimensions: 3000 + 520 x 105 mm Conveyor belt width: 400 mm PVC conveyor belt including cleats and wave edge * Optional with magnetic deflection roller at the end of the conveyor belt. * Optional with subframe * Custom designs in all variants possible. Itsdpfsd Ra Trex Akpoh

Tahun pembuatan: 2019, Kondisi: seperti baru (mesin pameran), Aluminium flat conveyor belt including 4 suspension points Dimensions: 6000 + 520 x 105 mm Conveyor belt width: 400 mm PVC conveyor belt including carriers and wave edge * Optionally available with magnetic deflection roller at the end of the conveyor belt. * Optionally available with substructure Iodpfx Akod Ra Ttspoth * Custom designs available in all variants.

Tahun pembuatan: 2023, Kondisi: baru, Aluminum angled conveyor belt with substructure including leveling feet and machine feet for compensating surface irregularities Horizontal section: 3,750 mm Ascending section: 3,200 mm Incline angle at the bend: 45° Total conveyor length measured on the floor: 6,000 mm Discharge height: 2,500 mm Height of horizontal section: 250 mm Specification: Aluminum structural design - Double-reinforced profile, 90x45 mm Drive roller and return roller made from S235 steel, welded and machined Ø100x520 mm, crown turned, shaft fixed with flange bearings. Itsdpfx Asht Uzaekpjh Drive: flange-mounted geared motor, 0.55 kW, speed 0.3 m/sec Connection 230/400V, 50 Hz, protection class IP54 Drive pre-wired to motor terminal box (Commissioning must be carried out by a qualified electrician) PVC conveyor belt DM 10/2 0+005 PVC, including PVC wave edge, green Belt width: 500 mm 2 pcs. wave edges, 40 mm high, 35 mm wide, high-frequency welded 46 pcs. T-40 cleats, approx. 300 mm pitch Belt material: 2-ply, especially cross-stable In the bend area, the belt is guided on each side by 3 hold-down rollers. The belt is designed with a 70 mm edge-free zone on both sides. Due to the wave edges on both sides, the usable belt width is reduced: Usable width: 290 mm, as follows: (Top view) cross arrangement 70+35+290+35+70 mm Our core competency lies in delivering exactly what the customer truly needs. We work together with our clients to develop customer-specific, individual solutions and supply appropriate systems from our own production. Please feel free to contact us by phone to find the optimal solution for your application. Conveyor belt, conveyor system, discharge conveyors, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic tape separator

Tahun pembuatan: 2019, Kondisi: seperti baru (mesin pameran), Aluminum flat conveyor belt including support frame. Dimensions: 6000 + 620 x 105 mm Conveyor belt width: 500 mm PVC conveyor belt with cleats, sidewalls, and sealing strip included. Feed hopper (stainless steel V2A) at the beginning of the conveyor belt. * Optional with magnetic deflection roller at the end of the conveyor belt. * Optional available as an incline conveyor. * Custom-made versions available in all configurations. Ijdpfx Aked Ra Uaspoth

Kondisi: bekas, Tahun pembuatan: 2017, jam operasional: 6.255 h,

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), Clamping force: 3,000 kN, holding force: 3,300 kN, max. opening stroke: 670 mm, min. mould installation height: 330 mm, max. mould installation height: 710 mm, max. distance between platen faces: 1,380 mm, platen dimensions: 1,040 x 950 mm, clear tie bar distance: 720 x 650 mm, max. mould weight: 4.7 t, max. weight on moving platen: 2.4 t, max. weight on fixed platen: 3.6 t, ejector stroke: 200 mm, ejector force: 69 kN, ejector retraction force: 31 kN, screw diameter: 50 mm, L/D ratio: 20, injection pressure at 400°C: 2,426 bar, shot volume: 530 cm³, part weight (PS): 480 g, max. dosing stroke: 270 mm, max. nozzle stroke: 470 mm, nozzle immersion depth (SVO): 20 mm, nozzle contact force: 110 kN, installed barrel heating: 14.8 kW, material hopper volume: 110 l, oil tank capacity: 700 l, electric screw drive: 38 kW, electric clamping unit drive: 37 kW, pump unit power: 22 kW, installed total power: 112 kW, continuous sound pressure level: 78 dB(A), length: 6,500 mm, width: 2,000 mm, height: 2,300 mm, weight: 15.7 t, PLC operating hours: 28,890 h, barrel heating: 35,656 h, pump: 27,922 h, documentation available. On-site inspection possible. Iedpfx Aoy Tx Rnskpoth

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, tinggi angkat: 10.000 mm, kapasitas angkut: 8.000 kg, kecepatan pengangkatan: 6.000 mm/dtk, kecepatan pengangkatan halus: 1.000 mm/dtk, tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, Hoist Demag – Cocok untuk crane girder ganda – Kapasitas: 8 ton – Ketinggian angkat: 10 m – Tahun pembuatan: 2019 – Tipe: Demag F-DMR-10-8-H20/10-4/1-Z-V1/6-400/50-CC A1 – Lebar lintasan troli: 1.400 mm – Kelas FEM/ISO: 3m / M6 – Jenis hoist: hoist kawat baja – Konfigurasi tali: 4/1 Kecepatan – Pengangkatan: 6/1 m/menit (2 kecepatan) – Gerak troli: 25/6,3 m/menit Fitur – Manual crane tersedia: ya – Kondisi: dalam kondisi baik – Detail: tersedia 2 unit Sudah termasuk Set Roda Demag Iodjy Rhhkopfx Akpeth – Panjang: 2.900 mm (tanpa buffer) – Tinggi: 300 mm – Cocok untuk rel crane 50×30 mm Fitur tambahan – Dilengkapi motor penggerak crane: ZBF 100 A8/2 B050

Kondisi: bekas, Tahun pembuatan: 2008, jam operasional: 35.000 h, gaya penjepit: 100 kN, volume langkah: 51 cm³, tekanan injeksi: 2.800 batang, berat keseluruhan: 5.000 kg, diameter konveyor sekrup: 25 mm, Basis pengiriman: FCA Pegnitz Waktu pengiriman: sesuai kesepakatan Syarat pembayaran: 100% pembayaran sebelum pengambilan mesin, bersih tanpa potongan Itodpowlkb Nsfx Akpeh

Kondisi: baru, berat kosong: 250 kg, berat muatan maksimum: 500 kg, berat keseluruhan: 750 kg, panjang ruang muatan: 2.010 mm, lebar ruang muat: 1.080 mm, tinggi ruang muatan: 810 mm,

Tahun pembuatan: 2019, jam operasional: 18.138 h, Kondisi: siap digunakan (bekas), berat keseluruhan: 25.340 kg, SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 ini diproduksi pada tahun 2019. Mesin injeksi listrik yang kokoh ini memiliki diameter ulir 50 mm, gaya penutupan 3.500 kN, dan jarak antara tiang 820 mm. Mesin ini telah mencatat 18.138 jam operasi dengan 12.875.090 siklus. Jika Anda mencari mesin injeksi berkualitas tinggi, pertimbangkan SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 yang kami tawarkan untuk dijual. Informasi tambahan: • Diameter ulir: 50 mm • Volume dosis maksimum: 530 cc • Jumlah siklus: 12.875.090 • Jarak antara tiang: 820 mm Ijdpsx D Nxzefx Akpoth • Gaya penutupan: 3.500 kN

Kondisi: baru, berat kosong: 120 kg, berat muatan maksimum: 630 kg, berat keseluruhan: 750 kg, panjang ruang muatan: 2.010 mm, lebar ruang muat: 1.060 mm, tinggi ruang muatan: 300 mm, ukuran ban: 155/70R13,

Kondisi: baru, berat kosong: 120 kg, berat muatan maksimum: 630 kg, berat keseluruhan: 750 kg, panjang ruang muatan: 2.010 mm, lebar ruang muat: 1.060 mm, tinggi ruang muatan: 700 mm, ukuran ban: 155/70R13,

Kondisi: baru, berat kosong: 130 kg, berat muatan maksimum: 620 kg, berat keseluruhan: 750 kg, panjang ruang muatan: 2.010 mm, lebar ruang muat: 1.080 mm, tinggi ruang muatan: 330 mm, ukuran ban: 145/80r13,