Pusat permesinan dengan meja bersarang

WEEKE VANTAGE 200

Kondisi: bekas, nomor mesin/kendaraan: 008170, a1 Blodpfsx A Tcuex Abhec

Kondisi: bekas, Working width 1350 mm Number of sanding units: 2 units Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Unitek Excel LC 1370 2N RKRT MODEL Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH: 1350 mm - SANDING BELT LENGTH: 1370 X 2150 mm - MAX. WORKPIECE THICKNESS: 160 mm - STEEL CALIBRATING ROLLER: 180 mm - Rubber-coated SANDING ROLLER: 180 mm - SANDING PAD WIDTH: 50 mm - BELT MOTOR POWER: 14.7 kW - BELT SPEED: 18/16 m/s - FEED MOTOR POWER: 0.75 HP - Variable speed gearbox for feed belt, infinitely adjustable: 4–20 m/min - HEIGHT ADJUSTMENT MOTOR: 0.33 HP - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 DRUM BRAKE for belt stopping - Swiveling ROLLER for belt tensioning - 3 PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 ROLLER CONVEYORS with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED BELT - 1 EXTRACTION PORT, 160 mm Ø - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system 1. No valves 2. No photoelectric sensors 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system has operated continuously without lateral belt run-off! - Unitek calibrating roller made of steel (standard for all models) - Unitek flexible pressure pad before and after the roller (standard for all machines with 1 roller) - Unitek grit compensation with mechanical grid set, 6 positions (each – standard for all models) - Unitek electronic segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor with 18.4 kW instead of 14.7 kW (PER MOTOR) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in case of emergency stop (standard for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller conveyors with 4 rollers (standard for all models) - Price per roller conveyor - Unitek electronic machine control with 12'' touchscreen (standard for all models) Automatic workpiece detection with feed control ----- Machine price in above configuration on request! Bedpfx Abormucxshjlc ----- Optional extras at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): EUR 8,390.00 Freight cost: EUR 1,300.00 Installation and commissioning: EUR 1,300.00 ----- All quoted prices are net prices plus statutory VAT of 19% ----- (Technical data as per manufacturer – subject to change without notice!)

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), This is a complete production line for house construction. Prices are listed for each individual item. Consisting of the following components (see the attached document as well): Images to follow; they are already included in the attached document. Table 1 (Laying in and clamping the frame construction) €34,500 - Height-adjustable longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity Table 2 (Laying the first facing layer and fastening) €25,300 - Longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 3 (Laying the second facing layer, fastening, and flipping the element onto the next table) €35,650 - Longitudinal transport with 3 hinge conveyors and facing layer - Pneumatic cross clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Installation of electrical components and insulation) €34,500 - Cross transport with rollers and facing layer - Table cross travel - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Laying the first facing layer and fastening the second side) €32,775 - Longitudinal transport with 3 hinge conveyors - Cross transport with rollers - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 6 (Laying the second facing layer and fastening) €28,750 - Longitudinal transport with 3 hinge conveyors - Pneumatic cross clamping - Connections for compressed air and electricity Table 7 (Assembly and distribution table) €29,900 - Longitudinal transport with 3 hinge conveyors Bodpfx Aeu D Amgjbhelc - Hydraulic swivel unit - Table cross travel unit - Upper guide for holding wall elements vertically Manual surface portal with vacuum lifter on Table 2 €13,800 (Laying the first facing layer) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 3 €13,800 (Laying the second facing layer) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 5 €13,800 (Laying the first facing layer on the second side) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Manual surface portal with vacuum lifter on Table 6 €13,800 (Laying the second facing layer on the second side) - Lifting capacity 85 kg with Schmalz vacuum system - Steel substructure with low-friction rails - Working range 12 x 5 m Wall storage rack 1: 12 m long x 24 tracks €11,500 Wall storage rack 2: 12 m long x 20 tracks Vacuum lifter with column slewing crane €9,200 1 Abus spreader beam 2 t €20,125 1 spreader beam 2 t

Kondisi: baik (bekas), UV curing oven for production line Bsdpfjt Ag Uqox Abholc

Kondisi: bekas, Tahun pembuatan: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY SOFTWARE XILOG MAESTRO: EXTREMELY SIMPLE PROGRAMMING MATIC WORKTABLE: ONE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (reference side) mm 3,680 Working area Y-axis (max. loadable workpiece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length in pendulum operation mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air velocity m/s 25 Extraction port diameter mm 250 GENERAL FEATURES CNC-controlled drilling and milling center in gantry design with workpiece support table, suitable for performing: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Grooving with disc cutter - General milling operations 3-4-5 axes MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced by welded reinforcements across the entire machine bed, ensuring extreme stability. The specially designed table form, with a broad base, is key to guaranteeing lasting precision and stability. The machine layout allows the operator an optimal workflow while keeping space requirements to a minimum. The mobile gantry carrier is constructed from a solid monoblock. It is positioned in the X-direction on prismatically ground guides with recirculating ball carriages. The machining unit on this mobile aggregate carrier is also guided on prismatically ground guides and recirculating ball carriages AXIS TRAVEL All axes move on large-section linear prism guides and recirculating ball shoes with a large support surface, ensuring optimal sliding even at maximum speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved by helical rack and pinion. Large-section recirculating ball screws ensure precise positioning of the working unit along the mobile gantry (Y- and Z-axes). MOTORS, DRIVES AND INVERTERS The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, dimensioned to allow speeds of up to 90 m/min while maintaining the best finishing quality CONTROL The control unit consists of a numerical controller for milling and drilling machines with the "Xilog Maestro" graphical user interface running on: - Office operating system Windows 7 - 17” color LCD screen - QWERTY keyboard - Swiveling control panel - Machine operation interface with Xilog Maestro software Xilog Maestro Features Programming - Parametric graphical programming - Import of DXF files (2D; geometries "SPLINE", "POLYLINE 3D", line or circle interpolation in three axes, linear in space, spiral interpolation in the selected plane) - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Capability for panel zero-point shifting to execute drilling on inclined or curved panel edges Bedpfx Aoxnldbsbhslc

Kondisi: siap digunakan (bekas), Caractéristiques techniques Usinage X 3180, Y 1340 Capacité de perçage X 3405, Y 1260 Verrouillage pneumatique Broche électro HSK63 12 kW, 3 axes Déplacement 0-100 m/min Groupe de rainurage lame 0-90° Unité de perçage vertical 14 broches, horizontal 6 broches, armoire de commande avec écran 15 pouces, SOFT et commande inclus Machine à remettre en service Nombre de ventouses : 12 Bsdpfxstqka Ts Abhjlc Nombre de poutres : 6 Caractéristiques usinage : pompe à vide Capacité de la pompe à vide : 100 m3/h Puissance et moteurs Dimensions hors tout

Kondisi: sangat baik (bekas), Single-Sided Destacking Station - Upper traverse horizontally movable by 180° - Console table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Sliding front safety guard - Separate control cabinet and operator panel - External roller conveyor for stack of sheets from the destacking unit - External powered roller conveyor from destacking unit, also with belt for transferring sheets at 90° - Operating capacity (cycles/min): 12–15 - Sheet thickness (min/max) mm: 10–40 - Min. sheet dimensions mm: 250 x 320 Bjdpfxocggy So Abholc - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Kondisi: bekas, Tahun pembuatan: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Aggregate and Accessories Description (Basic) The machine base structure is a monolithic design made from thick-walled steel. It is reinforced with welded triangular plates throughout the entire machine bed, providing extreme stability. The use of a triangle shape with a broad base for all load-bearing elements is the key to ensuring long-term precision and stability. The machine layout allows the operator to achieve an optimal workflow with minimal space requirements. This foundation provides a balanced, secure base for the processing unit with excellent load distribution. The mobile portal-type aggregate carrier is constructed as a solid monoblock. It is positioned in the X-axis along ground prismatic guides via recirculating ball carriages. The working aggregate is mounted to this portal carrier on ground prismatic guides and recirculating ball carriages. Axis Movement: Y and Z axes are driven by precision-ground recirculating ball screws of the highest accuracy class. The X-axis drive is a backlash-free, preloaded precision rack-and-pinion system. This ensures even load distribution during positioning, which is crucial for balanced movements even in complex operations. Axis movements are realized by brushless AC servo motors. These provide outstanding positioning speeds with very short ramp times. Additionally, all motors feature fully integrated measurement systems, making this drivetrain entirely maintenance-free. · Rapid traverse in X: 40 m/min · Rapid traverse in Y: 60 m/min · Rapid traverse in Z: 22.5 m/min Vacuum System (Basic) · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. vacuum (connection): 0.9 bar Control / Electrical Cabinet · Office PC or industrial PC (see options) · Basic NC control: ESA-GV KVARA 6.0 · Cable remote control with main functions ELECTRICAL/ELECTRONIC CNC CONTROL Universal is equipped with a powerful NC control system. The integrated office PC provides an unmatched level of familiarity to the NC system: the software operates on Windows XP, allowing fast and simple programming—even for inexperienced users. The system is open and allows connections to a CD-ROM drive, audio card, barcode reader, modem, printer, scanner systems, etc. Installation of any network systems or commercially available CAD programs is also possible. To save space, the electrical cabinet is mounted beneath the machine table, while the operator uses a separately mobile, wheeled console that can be freely positioned. PROGRAMMING SYSTEM XILOG Software features: - Import of DXF files - Import of ASCII files - Operator interface available in native language (I - GB - F - D - E) - Linear and circular interpolation in three axes, linear in space, helical on selected plane - Assisted programming - Calculator for direct transfer of computed data - Graphical and syntax aids for drilling and milling operations - Parametric programming for repeating panel machining on different p Bljdpfxsvvi Nzo Abhsc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Machining centre Manufacturer: Weeke Model: BHX 500 Year of manufacture: 2008 Working area X: 2,500 mm Working area Y: 1,300 mm Working area Z: 4 - 80 mm Number of milling units: 2 Number of drilling units: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Grooving saw: swivels 90° X-axis feed rate: 130 m/min Y-axis feed rate: 80 m/min Z1-axis feed rate: 50 m/min Z2-axis feed rate: 27 m/min Bodpfxsh E Sghe Abhelc Spindle speed: 18,000 rpm Dismantled – immediately available

Kondisi: diremajakan ulang (bekas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, with high-speed automatic handling equipment. Comprising the following machines: A) FEEDING STATION "RBO" Winner C 3200 with double pick-up and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for in-feeding panel stacks to the loader. B) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT Bljdpfx Absdfgg Ijhsc with 2 horizontal drilling units + 7 lower vertical drilling units D) 2nd AUTOMATIC DRILLING MACHINE "BIESSE" Mod. Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (Connecting roller table with 90° transfer belts) "RBO" Transfer TA 90° G) STACKING STATION "RBO" Winner SC 3200 with double pick-up, double stacking station, and central motorized roller conveyor table. Equipped with 2 floor-mounted motorized roller tracks for out-feeding panel stacks from the unloader.