Mesin bubut tengah

Weiler Condor 81

Kondisi: baik (bekas), Tahun pembuatan: 1988, Weiler lathe Model: Condor B 2-axis digital readout Centre height: 165 mm Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle bore: 40 mm Connected load: 3 kW Speed range: 22–2800 rpm Tailstock Morse taper: MK 3 Coolant pump (not connected) Work light automatic longitudinal and cross feed Spindle brake Kodpfx Aevgmbveahofa - Hinged chuck guard - Splash guard Weight approx. 1,040 kg 3-jaw chuck Multifix B quick-change tool post Live centre

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81, Lead and Feed Screw Lathe with NEW K&C 3-Axis Digital Readout Ksdpfx Aewb Supsahjfa Technical Data: >> Year of manufacture: 1983 Machine no.: 83-067 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose according to DIN 55027 size 5 with bayonet locking >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting capability: Metric, Imperial, Module, and Diametral Pitch threads >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be engaged >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> New K&C 3-axis digital readout, 12 months manufacturer's warranty, including operation manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter switching, quick zeroing, counting direction switching >> 1 piece NEW 160 mm 3-jaw chuck, 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 3 tool holders >> Electronic spindle guard >> Rear splash guard >> Coolant system >> Machine leveling feet About the machine: A used Weiler Condor 81 is offered here in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A full oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to inspect and test this machine under power at our premises.

Kondisi: bekas, en-001 Kfedpfx Aaok S Ht Ashsa

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Model: Condor 81 B Machine No.: 87596 Year of manufacture: approx. 1987 Centre distance: 750 mm Kfjdpfx Aaovadqzjhsa Swing over bed: Ø 330 mm Centre height over bed: 165 mm Swing over cross-slide: Ø 180 mm Centre height over cross-slide: 90 mm Spindle bore: Ø 40 mm Tailstock taper: MT 3 Quill travel: 110 mm Spindle speed: 45 - 2800 rpm (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor speed 1+2) Power supply: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment & accessories: - Heidenhain 3-axis digital readout, type VRZ 750 - Quick clamping unit and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix quick-change toolpost, size B - LED work lamp - Bed stop - Automatic longitudinal and facing feeds - Electro-mechanical spindle brake, switchable - 2x Emergency stop - Electronic chuck key interlock (via sleeve with switch) - Coolant tank with pump integrated in machine base - Hinged chuck guard - Splash guard panel - Circuit diagram - Adjustable machine feet Space required: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This newer generation of Weiler lathes is very user-friendly and robust. The machine can be demonstrated under power on site. All information is without guarantee. Subject to prior sale.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Weiler Condor 81 Weiler Condor 81 Lathe with Heidenhain Digital Readout, Year of Manufacture 1992, in Very Good Original Condition The machine comes from the training workshop of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 2003 Engine Lathe WEILER Type Condor 81 Centre distance: 750 mm Swing over bed: 330 mm Centre height over bed: 165 mm Swing over cross slide: 180 mm Centre height over cross slide: 90 mm Spindle bore: 40 mm Chuck mounting: short taper DIN 55027 size 5 Tailstock taper: MK 3 Quill stroke: 110 mm Spindle speed: 45 - 2800 rpm, 16 steps Drive power: 3 kW Power supply: 400 Volt, 50 Hz Spindle speed via 16-speed gearbox Required space (L x W x H): 1850 x 950 x 1400 mm Kodpfx Asw T U Sgsahefa Weight: 1100 kg Accessories and Equipment: Röhm 3-jaw chuck Multifix quick-change tool post Coolant system Heidenhain digital readout About this machine: We are offering a Weiler Condor 81 lathe with Heidenhain digital readout, year of manufacture 1992, in very good condition. The machine is, of course, fully functional. The slides move very smoothly and evenly. Even at high speeds, the Weiler runs extremely quietly. This newer generation of lathes is very user-friendly and allows surfaces to be produced with a ground-like finish. Take the opportunity to view the machine on site under power and see the condition for yourself. You will find further lathes from renowned manufacturers on our website.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Centre Lathe Model Condor 81 - Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Technical Data: >> Year of manufacture: 1988 Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 Size 5 with bayonet lock >> Tailstock taper MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight: approx. 1100 kg Kodpfx Aaoxu Hlajhsfa >> Spindle brake can be engaged >> Dimensions (LxHxD): 1.83 m x 1.29 m x 0.88 m Accessories and Features: >> 3-axis Heidenhain digital readout >> 1 pc new 3-jaw chuck with 2 sets of jaws >> Collet chuck system, collets from 3 to 30 mm, 40 collets (partially duplicate sizes) >> Multifix size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Rotating centre Safety Features: >> Lead and feed screw cover >> 2 emergency stop buttons >> Spindle brake About the Machine: Offered here is a used Weiler Condor 81 lathe, year 1988, in very good condition. The machine is fully functional, of course. For safety, the lead and feed screws are equipped with protective covers. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes work even easier and more precise. The machine has been electrically and mechanically checked by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our premises.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler centre lathe model Condor 81, lead and feed screw lathe with 3-axis digital readout from K&C, NEW Geometrically overhauled with acceptance protocol covering new machine tolerances Technical Data: >> Machine No. 84-121 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose, DIN 55027 size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Features: Kedpfxowrm Dtj Aahefa >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty, with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, direction reversal >> Collet chuck new, collets new from 3 to 26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws, new >> Multifix size B, new, with 3 toolholders >> Bed stop >> Electrical chuck guard, new >> Rear chip guard >> Operators manual >> Coolant system >> Machine levelling pads About the Machine: Offered is a Weiler Condor 81 lead and feed screw lathe in excellent, geometrically overhauled condition. The bedways have been reground and/or hand-scraped as new. Delivery with inspection protocol. Accessories such as collets and chuck are new. Safety features: The machine is equipped with a braking motor, electronic spindle guard, and two emergency stop switches – making it an as-new condition lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly and allows for ground-like finish surfaces to be produced. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.