Aksesoris Weiler E30

Weiler E30

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1990, jam operasional: 51.392 h, tinggi total: 1.700 mm, berat keseluruhan: 1.300 kg, This Weiler E30 was manufactured in 1990. A robust centre lathe featuring a spindle bore of 42 mm and a swing over bed of 330 mm. It supports a wide range of thread cutting operations, from metric to DP threads, and comes equipped with a Multifix toolpost size B. Ideally suited for precise and versatile turning tasks. Please contact us for further information about this machine. Additional Equipment • Multifix toolpost size B mounted • Fixed steady rest (optional), clamping range: 15–100 mm • Travelling steady rest (optional), clamping range: 10–85 mm • Collets from 3 mm (in 0.5 mm increments) • Tailstock with a MK3 sleeve Machine Advantages Technical Machine Advantages • Drive power 100% / 60% duty cycle: 9/11 kW • Maximum spindle torque: 180 Nm • Total speed range: 1–4500 rpm • Feed drive: three-phase AC feed motors • Longitudinal feed range: 0–20 mm/rev • Rapid traverse longitudinal/cross: 10/7.5/5/3.5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm • Quill taper: MK 3 Additional Information Swing over cross slide: 160 mm Bed width: 240 mm Travel of cross slide: 180 mm Saddle slideway length: 395 mm Turning tool cross section (H x W): 20 x 20 mm Spindle nose according to DIN 55027, size 5 Spindle diameter at front bearing: 70 mm Main spindle taper: MK 5 Workpiece: Metric thread range: 0.1 – 400 mm Inch thread range: G/1" 1/4 – 56 Module thread range: mm Rsdpfxoyaimfs Af Ssn DP thread range: 1–224 G/" Maximum number of threads: 50 Dimensions Machine depth: 1800 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Weiler E50 x 1000 Precision Lathe (2003) Manufacturer: Weiler Model: E50 x 1000 Year of manufacture: 2003 Condition: good, used, under power Rsdpsxd Tikofx Af Son Operating hours: 43,000 h For technical data, see images. Scope of delivery: - Original documentation - Rota S Plus 250-62 - Steady rest - Parat 4-position tool turret

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Swing diameter 330 mm Turning length 750 mm Control unit WEILER D3 Quill diameter 50 mm Quill stroke 130 mm Rsdpox Szpwsfx Af Sen Taper in tailstock quill MK-3 Spindle speeds 1-4500 rpm Main spindle taper MK-5 Machine weight approx. 1400 kg Required space approx. 1900 x 1300 x 1800 mm This WEILER E30x750 is in very well-maintained condition and can be inspected by arrangement with the seller. - Lever quick-action chuck for collets DIN 6343-48/173E and Rubber-Flex collets, clamping range 3–42 mm diameter, with mechanical and electrical interlock, max. speed 4500 rpm - 1 set of collets DIN 6343-48/173E - Adjustable hollow spindle stop 38–48 mm for main spindle - Travelling steady with sliding jaws, passage 10–85 mm - Three-jaw chuck with wedge-bar system, diameter 160 mm, bore 42 mm, mounting as per DIN 55027 /5, including 1 set of master jaws and hard reversible top jaws - Lever quick-action chuck for collets DIN 6343-48/173E and Rubber-Flex collets, clamping range 3–42 mm diameter, with mechanical and electrical interlock, max. speed 4500 rpm - 1 set of collets DIN 6343-48/173E - Adjustable hollow spindle stop 38–48 mm for main spindle

Kondisi: baik (bekas), Tahun pembuatan: 1991, Machine type: Cycle-controlled lathe Manufacturer: WEILER Model: E30 Year of manufacture: 1991 Control system: Weiler Country of origin: Germany Additional information: Cycle-controlled lathe WEILER - E30 Technical details Max. turning diameter: 330 mm Turning length: 750 mm Control system: Weiler Centre height: 165 mm Swing diameter over bed: 330 mm Max. swing diameter over cross slide: 160 mm Cross slide travel: 180 mm Longitudinal bed slide travel: 395 mm Main spindle: Speed range - main spindle: 1 - 4,500 rpm Drive power - main spindle: 9 / 11 kW Max. torque: 165 Nm Spindle nose: DIN 55027 / 5 Spindle diameter at front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: ( - ) mm Tool turret: Type: MultiFix Turning tool shank cross-section: 20 x 20 mm Tailstock: Quill stroke: 110 mm Quill diameter: 50 mm Tailstock taper: MK 3 Feeds: Rapid traverse: max. 10 m/min Feed force: 6 / 3 kN Feed range: 0 - 20 mm/rpm Thread cutting: Metric: 0.1 - 400 mm Inch: 1/4 - 56 TPI (G/1") Module: 0.125 - 28 mm.II DP: 1 - 224 TPI (.II) Max. number of thread pitches: 50 Total power requirement: 10 kVA Machine weight approx.: 1.5 t Rjdpfx Afsr Dvqzs Sjn Space requirements approx.: 2.8 x 2.0 x 2.0 m

Kondisi: baru, High-performance thread tapping machine with leadscrew setup. Safety device against tool breakage. Programs for single-cycle and continuous operation, programmable thread depth, piece counter, LED lamp, and electronically controlled motor braking for single-cycle mode. Simple leadscrew change via quick-release coupling. Standard drilling capacity: 15 mm Thread cutting capacity: M3 - M10 Threads per hour: 1,000 Spindle: MK 2 Thread depth: 60 mm Drilling depth: 100 mm Throat: 250 mm Distance spindle/table: 185 to 541 mm Table size: 340 x 445 mm T-slot width: 12 mm Column diameter: 90 mm Overall height: 1,050 mm Weight: 120 kg Special motor: 0.55 kW Rodjfrlndepfx Af Son Mains connection: 400 V/50 Hz BT 18 GL M00033 4 spindle speeds: 320 rpm / 560 rpm / 1,000 rpm / 1,600 rpm Also available as pillar drilling machine BS 18 GL (M00034)! Digital speed display as standard. Column 200 mm longer: 14154

Kondisi: bekas, Tahun pembuatan: 2002, x-travel 3200 mm y-travel 800 mm z-travel 600 mm Spindle taper SK40 Speed range 50 - 12,000 rpm Number of tools in magazine 30 pcs Table clamping surface 3900 x 750 mm Rapid traverse x/y/z 12/12/12 m/min Total power requirement 29 kW Machine weight approx. 15,000 kg Space requirements approx. 7200 x 3500 x 3100 mm CNC travelling column machining centre Hedelius Equipment: - Chip conveyor - 30-position tool changer - Heidenhain CNC control iTNC 530i - High-pressure belt filter system - ICS 15 bar - SK40 tool holders - Operating manual The following repairs were carried out in 07/2022: - Guide carriage of X-axis - Various pneumatic hoses - Safety glass of loading doors - Various illuminated push buttons - Door safety actuators - X-axis cover (lamella) Rjdpfx Aov S Irtof Ssn - ICS filters (4 pcs) - Filter cabinet - Timing belt Z + Y axis - Door wipers with damper - Hose for external cooling, spindle cooling, and spray guns (2 guns) - Set of coolant nozzles external cooling - 2x bellows of Y-axis - 1x set of door rollers with rail (6 meters) - 1x Klüber grease with taper extractor

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 29.532 h, Data Umum Berat mesin: 27.750 kg Unit Kontrol Merek: HEIDENHAIN Model: iTNC 530 Penggerak Utama Kisaran kecepatan spindle: 10.000 rpm Kepala alat: ISO 50 Jumlah sumbu: 5 Pergerakan Pergerakan sumbu X: 2.600 mm Rsdox D R A Uepfx Af Son Pergerakan sumbu Y: 1.100 mm Pergerakan sumbu Z: 900 mm Meja Kapasitas beban meja: 4.000 kg Mesin 5-sumbu DMG MORI DMF 260-11 Linear ini diproduksi tahun 2017. Memiliki meja berukuran besar (3.200 mm x 1.100 mm), kapasitas beban tinggi (4.000 kg), dan jangkauan gerak sumbu yang luas (X: 2.600 mm, Y: 1.100 mm, Z: 900 mm). Dengan kecepatan spindle hingga 10.000 rpm dan majalah alat dengan 60 slot, mesin ini ideal untuk pekerjaan pemesinan kompleks. Jika Anda mencari kemampuan milling berkualitas tinggi, pertimbangkan mesin DMG MORI DMF 260-11 Linear yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Milling

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, de Rsdpfxjv Rqfte Af Sen

Kondisi: bekas, tech_details_001 Rsdsxg Nhnjpfx Af Ssn

Kondisi: bekas, Tahun pembuatan: 2011, DMU60: 5-sumbu Spindel 18.000 rpm Majalah alat 24 posisi Penahan alat SK40 Jam spindle: 15.305 Zeroclamp 6 pot 138 (sistem penjepit titik nol) Rodpfjxpt Idsx Af Sen DMU100: 5-sumbu Spindel 18.000 rpm Majalah alat 32 posisi Penahan alat SK40 Jam spindle: 15.389 Zeroclamp 12 pot 138 (sistem penjepit titik nol)