Bubut - dikendalikan siklus

WEILER E 30

Kondisi: bekas, Tahun pembuatan: 2005, jam operasional: 11.800 h, Fungsionalitas: berfungsi sepenuhnya, lubang spindel: 41 mm, panjang pembubutan: 750 mm, diameter pembubutan: 330 mm, diameter pembubutan di atas alas geser: 435 mm, diameter quill: 50 mm, tinggi pusat: 165 mm, kecepatan spindel (maks.): 4.500 rpm, daya motor spindle: 11.000 W, berat keseluruhan: 1.400 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Description For sale is a cycle-controlled WEILER E30X750 CNC lathe equipped with Siemens 810 D control system. Manufacturer/Model: WEILER E30x750 Year of manufacture: 2005 Control: Siemens 810 D Condition: Good, fully operational Location: Near Munich Inspection: On site or by video call by arrangement Photos/Video: Additional photos and videos of the machine in operation are available upon request. Technical Specifications: Working area: Centre height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 160 mm Centre distance: 750 mm Spindle: Spindle nose DIN 55027 / DIN ISO 702-3: Size 5 Gjdozbybvepfx Agroiu Spindle bore: 40.5 mm Spindle diameter in front bearing: 70 mm Max. torque at spindle: 180 Nm Main drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 rpm Number of speeds: stepless Feed / rapid traverse Feed drive: Three-phase AC feed drives Feed range (stepless): Longitudinal: 0.001–50 mm/rev (Note: also specified as 0–20 mm/rev) Cross: 0.001–50 mm/rev Feed force: Longitudinal: 6,000 N Cross: 3,000 N Max. rapid traverse speed longitudinal/cross: 8 / 4 m/min (Note: also specified as 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 tpi Tailstock / Quill: Quill diameter: 50 mm Quill travel: 110 mm Internal taper DIN 228: MT 3 Dimensions / Weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1800 × 1350 × 1700 mm Interested? Contact us for more information or to arrange a viewing appointment. Supplier MT EVO, Puch near Salzburg

Kondisi: baru, Tahun pembuatan: 2024, nomor mesin/kendaraan: 302340, Section rolling machine Manufacturer: KB Turkey Model: MB 30 Lower shaft: 30 mm Upper shaft: 30 mm 2 driven rollers With base frame for horizontal and vertical operation Bending capacity: - Round tube up to 48 x 3.0 mm - Flat bar (upright) 50 x 10 mm Geded S Uf Sopfx Agrsiu - Square tube 40 x 40 x 3 mm Weight: 170 kg Motor: 0.75 kW, 400 Volt, 50 Hz, 3-phase.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, weiler-e30-drehmaschine-2018 Gedpfx Agoy Uzgbersiu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jam operasional: 8.000 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 750 mm, diameter pembubutan: 330 mm, lubang spindel: 41 mm, kecepatan spindel (maks.): 4.500 rpm, kecepatan spindel (min.): 1 rpm, daya motor spindle: 11.000 W, diameter quill: 50 mm, gores kuas bulu: 110 mm, diameter pembubutan di atas alas geser: 435 mm, berat keseluruhan: 1.400 kg, tinggi pusat: 165 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, For sale is a cycle-controlled WEILER E30X750 CNC lathe equipped with a Siemens 810 D control system. Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Giodpfx Aovphv Tjgreu Control: Siemens 810 D Condition: good, fully functional Location: Austria (Graz) Inspection: On site or via video call by arrangement Photos/Video: Additional photos and videos of the running machine are available upon request. Technical Data: Working Area: Centre height: 165 mm Swing over bed: 330 mm Swing over cross slide: 160 mm Distance between centres: 750 mm Main Spindle: Spindle head DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle diameter at front bearing: 70 mm Max. torque at spindle: 180 Nm Main Drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 rpm Number of speeds: infinitely variable Feed / Rapid traverse Feed Drive: 3-phase AC feed drives Feed range (infinitely variable): Longitudinal: 0.001–50 mm/rev (Add. info: also specified as 0–20 mm/rev) Cross: 0.001–50 mm/rev Feed force: Longitudinal: 6,000 N Cross: 3,000 N Max. rapid traverse speed longitudinal/cross: 8 / 4 m/min (Add. info: also specified as 10 / 7.5 / 5 / 3.5 m/min) Thread Cutting Range: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 TPI Tailstock / Quill: Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MT 3 Dimensions / Weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1800 × 1350 × 1700 mm Interested? Contact us for further information or to schedule a viewing appointment.

Kondisi: bekas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 50 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW SUB SPINDLE - Max. bar diameter: 20 mm - Travel path Z: 150 mm - Travel path X: 225 mm - Spindle speed: 8,000 rpm - Spindle drive power: 1.1 kW - Number of bush holders: 1 BUSH HOLDER 1 - Number of positions: 5 - Travel path X/Y: 97/133 mm SUBSEQUENT MACHINING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 6 kW DIMENSIONS AND WEIGHT - Required space: 1063/2033 mm Gedpfx Ajuha Umsgrjiu - Machine height: 1666 mm - Machine weight: 1,700 kg ACCESSORIES - Control system: CINCOM 18iTB - Coolant tank - Bar feeder: IEMCA SMART 320

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1990, jam operasional: 51.392 h, tinggi total: 1.700 mm, berat keseluruhan: 1.300 kg, This Weiler E30 was manufactured in 1990. A robust centre lathe featuring a spindle bore of 42 mm and a swing over bed of 330 mm. It supports a wide range of thread cutting operations, from metric to DP threads, and comes equipped with a Multifix toolpost size B. Ideally suited for precise and versatile turning tasks. Please contact us for further information about this machine. Additional Equipment • Multifix toolpost size B mounted • Fixed steady rest (optional), clamping range: 15–100 mm • Travelling steady rest (optional), clamping range: 10–85 mm • Collets from 3 mm (in 0.5 mm increments) • Tailstock with a MK3 sleeve Machine Advantages Technical Machine Advantages • Drive power 100% / 60% duty cycle: 9/11 kW • Maximum spindle torque: 180 Nm • Total speed range: 1–4500 rpm • Feed drive: three-phase AC feed motors Gjdpfx Agsyaimferoiu • Longitudinal feed range: 0–20 mm/rev • Rapid traverse longitudinal/cross: 10/7.5/5/3.5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm • Quill taper: MK 3 Additional Information Swing over cross slide: 160 mm Bed width: 240 mm Travel of cross slide: 180 mm Saddle slideway length: 395 mm Turning tool cross section (H x W): 20 x 20 mm Spindle nose according to DIN 55027, size 5 Spindle diameter at front bearing: 70 mm Main spindle taper: MK 5 Workpiece: Metric thread range: 0.1 – 400 mm Inch thread range: G/1" 1/4 – 56 Module thread range: mm DP thread range: 1–224 G/" Maximum number of threads: 50 Dimensions Machine depth: 1800 mm

Tahun pembuatan: 2010, Kondisi: hampir baru (bekas), We offer the following accessories for the Weiler E30 lathe: Gijdpfx Agjgabvnereu 1 pc. Schunk faceplate 250 mm Price: €600 Spindle mount DIN 55027 size 5 2 pcs. Röhm faceplate 260 mm Price per piece: €650 Spindle mount DIN 55027 size 5 1 pc. Travelling steady Price: €450 2 pcs. Drive flanges Price per piece: €210 Spindle mount DIN 55027 size 5 All items are in very good condition.

Kondisi: bekas, Tahun pembuatan: 1999, X-axis travel 600 mm y-axis travel 525 mm z-axis travel 500 mm Table clamping surface 1000 x 543 mm Spindle taper SK 40 Giodpotqqmhjfx Agreu Spindle mount DIN 69871 Spindle speeds - stepless 20 - 12,000 rpm Feed rates X/Y/Z axis 20 - 10,000 mm/min Rapid traverse X/Y/Z axis 18 / 18 / 15 m/min Table load capacity max. 350 kg Control HEIDENHAIN MillPlus Head swiveling +/- 90° Total power requirement 26 kVA Machine weight approx. 4.2 t Machine dimensions L x W x H 2.95 x 2.1 x 2.26 m Accessories: various tool holders, coolant system

Kondisi: hampir baru (bekas), CNC-Vertikal-Bohrwerk WMW MIKROMAT Verfahrweg X: 1.120 mm Verfahrweg Y: 710 mm Gjdpfegy E Dpox Agroiu Spindelhub Z: 315 mm Verfahrweg W: 630 mm Numerische Steuerung: CNC NUM 1060 Spindel: Ø 125 mm Aufnahme: SA40 Drehzahlbereich: 36 bis 2.240 U/min Tischgröße: 1.400 x 900 mm Abstand zwischen den Ständern: 1.080 mm Max. Abstand Spindelstirn/Tisch: 0 bis max. 900 mm Max. zulässige Tischbelastung: 1.000 kg Getrenntes Schaltschrank Maschine 2000 mit CN NUM 1060 modernisiert Spannung: 380 V Abmessungen (L x B x H): 4.000 x 2.460 x 3.030 mm Gewicht: ca. 9 t

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: LZ280/3, diameter putar di atas sled silang: 190 mm, lubang spindel: 43 mm, diameter pembubutan: 330 mm, diameter pembubutan di atas alas geser: 330 mm, tinggi pusat: 165 mm, panjang pembubutan: 670 mm, gores kuas bulu: 90 mm, diameter quill: 45 mm, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 30 rpm, GDW precision lathe LZ 330 V EconomyLine The LZ 330 V EconomyLine is a powerful geared-head lathe with a continuously variable spindle speed range from 30 to 4,000 rpm. The standard paint finish includes RAL 7035 (light grey) for the enclosure and RAL 7016 (anthracite grey) for the base, splash guard, and chuck guard. Features & Accessories: ✅ 3-axis position display with 6'' color screen ✅ Multifix A quick-change tool post including 1 turning tool holder ✅ Coolant system & central lubrication ✅ Chip tray, splash guard & spindle brake ✅ LED machine lamp & K32 collet board ✅ Electromechanical end-stop system for threading/feeds ✅ Tool cabinet with telescopic pull-outs including operating tools Additional equipment package (optional): ➕ 3-jaw chuck Ø 160 mm (up to 4,600 rpm) ➕ Keyless drill chuck (3–16 mm, B16/MK3) ➕ Live center MK3 & boring bar holder ➕ 4 additional turning tool holders & 1 boring bar holder 📦 Delivery: ✔️ Disposable packaging & secure transport incl. insurance Gisdpfjv Dan Dox Agrou Perfect for precise and demanding turning applications in industry and workshops! 🚀