Mesin bubut pusat

Weiler Matador VS2

Kondisi: siap digunakan (bekas), de-hu-001 Fedpfxexq Hhyj Adqjpn

Kondisi: bekas, x-axis travel 800 mm y-axis travel 400 mm z-axis travel 300 mm Heidenhain digital readout Clamping surface of table 1000 x 520 mm Spindle speed range 40 to 2000 rpm Spindle taper SK 40 Total power requirement 2.2 kW Machine weight approx. 2.2 t Required floor space approx. 1700 x 1600 x 1800 mm Fpedpfeqpl Uusx Adqon Deckel FP 2 B - Skew bed in travelling column design Universal swivel/tilt table including various SK40 holders, draw-in thread S20x2 Collet chuck holder Machine was overhauled at a cost of approx. €24,000.00

Kondisi: siap digunakan (bekas), WEILER Matador VS 2, termasuk layar digital tiga sumbu yang baru dari operasi pelatihan - Tinggi senter 140 mm - Jarak antar senter 500 mm - Kecepatan spindel 15 - 3550 RPM - Umpan otomatis untuk gerakan memanjang dan melintang Fpjdpfxezr Rnys Adqsn - Ulir / Metrik / Inci, dll. - Layar digital tiga sumbu yang baru - Pelindung chuck elektrik - Lampu kerja - Dudukan dasar Multifix dengan sisipan - Sistem pendingin - Chuck tiga rahang / chuck batang baji - Senter tetap MK 3 - Berbagai perkakas - Dokumentasi Dimensi: PxLxT 1,5 x 0,6 x 1,5 meter / Berat 680 kg Kesalahan dan perubahan dapat terjadi.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 lead and feed screw lathe with 3-axis digital readout Heidenhain ND 780 from training workshop!! Fodpfx Aoy T Hqcsdqjpn Technical Specifications: >> Machine No. 7702, year of manufacture approx. 1990 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and Equipment: >> 3-axis digital readout Heidenhain ND 780 >> Quick-clamping device, internal and external collets (see picture) >> 1 pc 3-jaw chuck, 3 sets of jaws >> Multifix size A with 3 tool holders >> Spindle guard >> 1 pc bed stop >> Change gears >> Machine feet About the machine: For sale is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The Weiler also runs quietly at high spindle speeds. The original location of the lathe was a training workshop. The machine comes with extensive accessories. Take advantage of the opportunity to view and test the machine under power on site to confirm its excellent condition.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1987, Mesin frais serbaguna Merek: DECKEL Model: FP 2 Aktiv Fjdox A Eddepfx Adqepn Tahun pembuatan: 1987 - direkondisi, dicat ulang dengan elektrikal mesin baru RAL7035 abu-abu terang / RAL7012 abu-abu basal RAL5008 abu-abu kebiruan No. Mesin: 2202-11579 Tipe kepala frais: 2271 Nomor kepala frais: 300-3606 dengan garansi penerimaan geometrik dengan protokol pengujian Aksesori: - Penunjuk digital aktif 3-sumbu HEIDENHAIN TNC 113 - Meja tetap 660 x 380 mm (alur-T: 12 mm) - Kepala frais vertikal SK 40 dengan ulir penarik S 20 x 2 - Pelumasan sentral manual - Sistem pendingin - Manual pengoperasian - bekas, kondisi sebagaimana adanya -

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 leadscrew and feedscrew lathe with 3-axis Elesta digital readout, from a training workshop! Technical specifications: >> Machine serial no.: 88-8115, Year of manufacture: 1988 >> Center height: 140 mm Fedey Tmkvepfx Adqepn >> Center distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short-taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Threads possible: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight: approx. 700 kg >> Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and equipment: >> 3-axis digital readout from Elesta >> Quick-change collet chucking system for internal and external collets (see picture) >> 1 pc. three-jaw chuck with 1 set of jaws >> Multifix size A with 3 tool holders >> Spindle guard >> 1 pc. bed stop >> Change gears >> Travelling steady >> Machine mounts/feet About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The Weiler also runs quietly at high speeds. The original location of the machine was a training workshop. The machine comes with an extensive range of accessories. Take the opportunity to inspect the machine under power on site and see its excellent condition for yourself.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C, in Special Light Grey Paint!! Technical Data: >> Machine No. 92-028, Year of Manufacture 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Spindle Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with Bayonet Lock >> Tailstock Morse Taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Features: >> 3-axis digital readout by K&C, NEW, 12-month manufacturer's warranty including operating manual Features: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter, quick zeroing, counting direction switching >> 1 pc. 3-jaw chuck, 1 set of jaws >> 1 pc. 4-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Fsdpfxsyyb T Ss Adqjpn Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout from K&C has been retrofitted. All scales are new and equipped with protective covers to shield them from dirt. All carriage movements are smooth and uniform. Take the opportunity to inspect this machine under power on-site and verify its condition for yourself.

Kondisi: baik (bekas), Mesin Frais Alat Friedrich Deckel FP 2 LB. Aksesori tidak termasuk dalam cakupan pengiriman, tetapi dapat dibeli dalam lelang lain melalui tautan ini. Sejumlah Alat Frais Mesin frais universal Deckel FP 2 LB dicirikan oleh badan dasarnya yang sangat stabil dan dirancang sebagai mesin yang berdiri di lantai. Ini berarti mesin mempertahankan presisinya bahkan saat memproses benda kerja berat dengan berat hingga 1000 kg. Fitur lainnya adalah alas yang miring 45 derajat. Setelah meja universal dilepas, desain ini memungkinkan penjepitan dan pemesinan langsung blok mesin V dengan sudut silinder 90 derajat, seperti mesin V8 Amerika. Selain itu, jarak tempuh yang panjang sebesar 800 mm menguntungkan dalam aplikasi ini. Data teknis: Mesin Frais Universal Deckel FP 2 LB Tampilan digital: Tampilan digital 3 sumbu Heidenhain Jarak tempuh sumbu X: 800 mm Jarak tempuh sumbu Y: 300 mm Jarak tempuh sumbu Z: 400 mm Penyangga alat: Ulir penjepit SK 40 S 20 x 2 Jenis kepala frais: Kepala frais vertikal Rentang kecepatan: 40 - 2000 rpm Jumlah langkah: 18 Jenis meja: Meja putar/miring universal (± 45° / ± 15°) Permukaan penjepitan meja: 1000 x 520 mm Fpodpfx Asgyw S Todqen Ukuran alur-T: 16 mm Penjepit 160 mm Beban terhubung: 9,5 kVA Berat: sekitar 1900 kg Dimensi: sekitar 1570 x 1675 x 1850 Anda dapat menemukan lebih banyak barang baru dan bekas di toko kami! Biaya pengiriman internasional berdasarkan permintaan!

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C, NEW, in Special Light Grey Paintwork!!! Technical Data: >> Machine No. 92-027, Year of Manufacture: 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock: MT 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg Fodpfx Adeyylq Ueqepn >> Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories & Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty, with operating manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 toolholders >> Motor brake >> Bed stop About the Machine: This Weiler Matador VS-2 is offered in excellent condition. The machine is, of course, fully functional and has been newly repainted in light grey. It is a very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All linear scales are new and are equipped with protective covers to prevent contamination. All slides move smoothly and evenly. You are welcome to inspect the machine under power at our premises to verify its condition.

Kondisi: baik (bekas), Tahun pembuatan: 1962, Spindle mount, vertical + horizontal SK / ISO 40 Angle table clamping area 700 x 285 mm Travel paths X-axis 500 mm Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed rates 8 - 400 mm/min Rapid traverse 1200 mm/min Drive power 2.2 kW Dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Fpodpfx Adom Uygvjqsn Accessories / Special features: • Vertical milling head, swiveling L/R • Fixed angle clamping table • Feed + rapid traverse on all axes Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel