Bubut-konvensional-elektronik

WEILER MATADOR VS 2

Kondisi: bekas, Dijual mesin bubut bekas Weiler Matador. Tipe VS2 dengan transmisi presetel. Termasuk roda gigi pengganti dan set collet. Dalam kondisi fungsional yang baik. Ketinggian pusat: 140 mm Putaran di atas tempat tidur: 295 mm Jarak pusat: 500 mm Lubang spindel: 36 mm Kecepatan spindel: 15 - 3350 rpm Inspeksi dalam kondisi terhubung listrik dapat dilakukan di 5023 Salzburg. Bwjdjy Hi A Ijpfx Am Ijl Forklift untuk pemuatan tersedia.

Kondisi: bekas, Tahun pembuatan: 2009, Cutting diameter: 15 - 560 mm Cutting range at 90 degrees: flat 560 x 630 mm Saw blade dimensions: 7,400 x 54 x 1.60 mm Control system: KASTO Material feed - single stroke: 900 mm Maximum multiple feed length: 9,999 mm Minimum cut length: 6.00 mm Saw motor: 5.50 kW Cutting speed: 13 - 127 m/min Material support height: 700 mm Total power requirement: 12.00 kW Machine weight: approx. 6.00 t Space requirement: approx. 3.70 x 2.50 x H2.50 m Two-column automatic bandsaw with KASTO Compact Control system; Bwjdsvxwkfopfx Am Ijl Frequency-controlled saw band drive; Minimum quantity lubrication; Chip conveyor; Powered infeed conveyor 6 m + 3x short roller conveyor 1 m; Outfeed conveyor 2 m; Machine can be inspected under power.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C, NEW, in Special Light Grey Paintwork!!! Technical Data: >> Machine No. 92-027, Year of Manufacture: 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock: MT 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories & Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty, with operating manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool memory for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 1 set of jaws >> Electronic spindle guard Bodpfx Ameyylq Uo Iowl >> Multifix size A with 2 toolholders >> Motor brake >> Bed stop About the Machine: This Weiler Matador VS-2 is offered in excellent condition. The machine is, of course, fully functional and has been newly repainted in light grey. It is a very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All linear scales are new and are equipped with protective covers to prevent contamination. All slides move smoothly and evenly. You are welcome to inspect the machine under power at our premises to verify its condition.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout from K&C, NEW, in Special Light Grey Paint Finish!!! Technical Specifications: >> Machine No. 92-029, Year of Manufacture: 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Spindle Speed: 15 – 3550 rpm >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock >> Tailstock Morse Taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads possible >> Metric thread pitches: 0.25 to 12 mm >> Weight approx. 700 kg Bodpfxjyylqhs Am Iewl >> Dimensions: Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty with user manual Functions: mm/inch switching, ABS/INC coordinate selection, value halving, reference mark, 200-tool programming, taper calculation, radius/diameter mode, quick zeroing, count direction switching >> 1 three-jaw chuck (1 set of jaws) >> 1 four-jaw chuck (2 sets of jaws) >> Electronic spindle guard >> Multifix Size A quick-change toolpost with 2 tool holders >> Motor brake >> Bed stop About the Machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly repainted in light grey. A very well-presented machine. The K&C 3-axis digital readout was retrofitted. All scales are new and equipped with protective covers to guard against dirt. The slides run smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself.

Kondisi: bekas, Turning length 800 mm Turning diameter 280 mm Bedpfsxacg Rox Am Iowl Turning diameter over cross slide 150 mm Spindle bore 42.0 mm Tailstock quill taper MK 3 Bed width 208 mm Speed range 42 – 2022 rpm Spindle mount DIN 55027/5 Quill stroke 90.0 mm Voltage 380 V Total power requirement 3.0 kW Machine weight approx. 750 kg Dimensions (L x W x H) 1800 x 800 x 1250 mm Due to its construction (design, performance, feeds, etc.), this machine can be successfully used both in training workshops as well as for toolmaking and repair shops. Equipment: - Heavy-duty conventional lead screw/feed shaft lathe - WMW 3-jaw chuck Ø 150 mm - Face plate 280 mm - MULTIFIX quick-change tool post with insert - Sliding tailstock - Chuck key - Machine base with storage compartment - Pole-change motor - Operating manual

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Weiler Matador VS-2 Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C, in Special Light Grey Paint!! Technical Data: >> Machine No. 92-028, Year of Manufacture 1992 >> Centre Height: 140 mm >> Centre Distance: 500 mm >> Spindle Speed: 15 – 3550 rpm Bjdpfx Aoyyb T Som Iewl >> Spindle Bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with Bayonet Lock >> Tailstock Morse Taper 3 >> Feeds from 0.012 to 0.9 mm/rev >> Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Features: >> 3-axis digital readout by K&C, NEW, 12-month manufacturer's warranty including operating manual Features: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter, quick zeroing, counting direction switching >> 1 pc. 3-jaw chuck, 1 set of jaws >> 1 pc. 4-jaw chuck, 1 set of jaws >> Electronic spindle guard >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout from K&C has been retrofitted. All scales are new and equipped with protective covers to shield them from dirt. All carriage movements are smooth and uniform. Take the opportunity to inspect this machine under power on-site and verify its condition for yourself.

Kondisi: bekas, Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Mesin bubut Weiler Matador VS2, tahun pembuatan 1992, chuck tiga rahang, Multifix, pelindung cipratan belakang, pelindung chuck elektrik. Mesin dalam kondisi baik dan siap pakai, dapat didemonstrasikan dalam keadaan terhubung listrik setelah perjanjian. Bodpfx Asx Sqvgsm Iewl

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), A fully automatic Kasto bandsaw system is available. Cutting capacity at 90°: round material: 530 mm, square material: 530 mm x 530 mm, flat material: 530 mm x 640 mm. Saw blade length: 7,675 mm, blade width: 54 mm, blade thickness: 1.6 mm, cutting speed: 120 m/min. Overall system dimensions (X/Y): approx. 18,000 mm / 4,000 mm. Weight: approx. 6,000 kg. Including roller conveyors. Documentation available. An on-site inspection is possible. Bsdpfxsv S E Edo Am Iowl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 280 mm, WEILER_MATADOR_VS2_nl-hu Bjdpjytd U Refx Am Ijwl

Kondisi: siap digunakan (bekas), drehauszstattung-001 Bwedpfsxnda Usx Am Isl

Kondisi: baik (bekas), Tahun pembuatan: 2000,