Mesin penghancur kayu

WEIMA WL 6

Kondisi: baru, Tahun pembuatan: 2026, Weima single-shaft shredder type WL 6 Power: 18.5 kW Our Machine Concept WL 6 The high-performance Weima shredders, with their flexible application possibilities, can process all types of wood materials (hardwood, softwood, chipboard, MDF, plywood, veneer offcuts, etc.) into fuel chips, achieving enormous volume reduction of bulky materials. Functionality: The machine is equipped with a large feed hopper and can be loaded either by conveyor belt or manually. The hopper can be adapted to individual requirements and guarantees continuous and cost-effective material feeding without the need for manual assistance. Technical Specification WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Working width of rotor: 800 mm Rotor diameter: 252 mm Drive power: 18.5 kW Fedpfx Aoh Eiw Ijirsgc Rotor speed: 80–120 rpm Number of knives: 42 pcs Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 10–60 mm possible (standard 15–20 mm) Paint finish: WEIMA Standard RAL 2002 / 7016 Connected load: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta start - Rubber vibration dampers - V-rotor (patented) with profile-milled knife pockets - Gear end switch - Pressure strip - Very robust Weima WAP gearbox - Logspacer (self-cleaning hopper) - Second knife row Available from stock in 54634 Bitburg - Immediately available - Request more information

Kondisi: siap digunakan (bekas), de Fgedpfswnx Uiex Airec

Kondisi: baru, Tahun pembuatan: 2026, en-001 Fgsdpfxeh Hnp Do Airjc

Kondisi: baru, Tahun pembuatan: 2026, en Fgedpscbtpkefx Airec

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), A Gross Apparatebau GmbH shredder, previously used in the timber industry, is available. Feed opening (X/Y): 600mm/800mm, Hopper volume: 0.6m³, Rotor diameter: 252mm, Rotor length: 600mm, Rotor speed: 90rpm, Drive power: 18.5kW, Number of knives: 14, Screen perforation: 10mm-40mm, Extraction port diameter: 160mm, Machine dimensions (X/Y/Z): approx. 1800mm/1200mm/1650mm, Weight: approx. 1300kg, Operating hours: 4578h. Documentation is available. An on-site inspection is possible. Fgjdou Nlkxspfx Airec

Kondisi: bekas, Tahun pembuatan: 2026, Special offer – Demonstration machine in Garbsen Fsdpfx Ajy D E Tdeirogc Our Machine Concept: WL 6 The WEIMA high-performance shredder, with its versatile range of applications, can process all types of wood materials (hardwood, softwood, chipboard, MDF, plywood, veneer offcuts, etc.) into fuel chips, achieving significant volume reduction, especially with bulky materials. Functionality: The machine is equipped with a large feed hopper, which can be loaded either by conveyor belt or manually. The hopper can be adapted to individual needs and ensures continuous and cost-effective material feeding without requiring manual intervention. The hydraulically controlled pusher feeds the wood waste to be shredded into the rotor cutting area, with automatic, load-dependent control. The internal pusher guides are made of highly wear-resistant plastic (polyamide) and are adjustable. Hydraulic cylinders are mounted in a gimbal suspension to avoid lateral forces on the piston seals. The patented, profiled V-rotor made from solid steel has a diameter of 252 mm and runs at a speed of 80–120 rpm. The concave-ground, aggressive, and four-way reversible knives/cutting crowns are mounted in milled knife pockets on special knife holders. The patented system guarantees high throughput, low energy consumption, and optimal discharge of shredded material thanks to a uniquely reduced cutting gap between counterknife and rotor. A screen mounted beneath the rotor determines the chip size (10–100 mm). Upon request, a hydraulically opening screen basket is available. Power from the electric motors is transmitted via V-belts to a robustly dimensioned gearbox, which is mounted on the rotor shaft end. Precise Cutting at High Throughput with Profiled V-Rotor The V-rotor, developed by WEIMA, is universally applicable and made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput at low power consumption. It can be fitted with hardened steel cutting knives in edge lengths of 30 mm and 40 mm, which can be rotated several times to significantly reduce maintenance costs. Intuitive Operation Thanks to Siemens PLC Control with Touch Display To ensure optimal alignment of electronics and machine, we design, build, and wire our switch cabinets ourselves – using only high-quality components from manufacturers such as Siemens and Rittal. Intuitive touchscreen interfaces guarantee quick adjustments. Functions such as adjusting the pusher cycle or stop ensure high throughput. Built-in overload protection prevents machine defects. Technical Specifications WL 6 - Feed Opening: 800 x 1,250 mm - Hopper Volume: 0.9 m³ - Rotor Length: 800 mm - Rotor Diameter: 256 mm - Drive Power: 22 kW - Rotor Speed: 90 rpm - Max. Number of Knives: 42 - Knife Type & Size: concave / 40 x 40 mm; cutting crowns - Screen Hole Size: 10–60 mm - Paint: WEIMA Standard RAL 2022 / 7016 - Electrical Connection: 400 V +/- 5% / 50 Hz - Weight: approx. 1,600 kg Includes: - Control cabinet* (Rittal) incl. electrical control (Moeller / Siemens) and S (incomplete text)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 1.100 h, Fungsionalitas: belum diuji, berat keseluruhan: 2.200 kg, jumlah bilah: 42, diameter rotor: 260 mm, WEIMA WL 6 – Single-Shaft Shredder for Wood Waste, Year of Manufacture 2007, only approx. 1,100 Operating Hours For sale is a used WEIMA WL 6 single-shaft shredder (wood shredder/chipper) from WEIMA Maschinenbau GmbH, Ilsfeld. The machine comes from an active production environment and is in good external condition considering its age. Special feature: The operating hours meter shows only approx. 1,100 hours – with a manufacturing year of 2007, this equates to an average use of just around 60 hours per year. Rotor, bearings, and drive train are therefore expectedly very minimally worn. The machine is equipped with an automatic feed conveyor unit for continuous material infeed. The upper cover is removable—allowing for manual feeding as well. The separate electrical cabinet is fully included and professionally assembled (Moeller/Eaton contactors, motor protection switch, safety relay, Siemens S7-200 basic PLC). The machine was decommissioned after removal from production and has not been put back into operation since. Inspection on site in Lennestadt (NRW) available at any time by appointment. Technical data: Manufacturer: WEIMA Maschinenbau GmbH, Ilsfeld Fgjdpoy U Nu Tofx Airoc Model: WL 6 Year of manufacture: 06/2007 Operating hours: approx. 1,100 hrs (read from meter) Motor power: 18.5 kW Voltage: 400 V / 50 Hz Rotor speed: 90–100 rpm Rotor diameter: 260 mm Rotor length: 800 mm Max. number of knives: 42 pcs. Knife size: 40 mm Screen hole diameter: approx. 14.5 mm (measured) Grain size: adjustable 10–60 mm Infeed opening: 800 x 1,250 mm Extraction port: Ø 200 mm Length: 2,390 mm / Width: 1,390 mm / Height: 1,840 mm Weight: approx. 2,000 kg Feeding: Conveyor belt infeed (upper deck removable) Control: Control cabinet with Siemens S7-200, Moeller/Eaton contactors, safety relay More pictures available on request.

Kondisi: bekas, Fungsionalitas: belum diuji, Tahun pembuatan: 2017, Ponsse Fox 8W Harvester Kayu (2017) dengan kepala panen H6 Fodpfx Aexw U I Ujirsgc

Kondisi: sangat baik (bekas), NOMOR KATALOG 6114 DATA TEKNIS - Bukaan corong pengisi 800x1000mm - Lebar kerja rotor 800mm - Motor pompa 0,75kW - Motor utama 15kW - Jumlah pisau 21 buah - Ukuran pisau 30x30mm - Saringan 0,8x10mm - Laci penekan - Autorevers listrik - Screw konveyor pembongkaran 2×1,1kW - Dimensi p/l/t 2460x1800x2250mm - Berat 1660kg – Produksi Jerman – Autorevers – Laci penekan – Tidak dicat – Kondisi sangat baik Fgodpfsy Nzxgex Airsc – Mesin pencacah bekas Harga netto: 59.900 PLN Harga netto: 14.260 euro berdasarkan kurs 4,2 euro (Harga dapat berubah jika terjadi fluktuasi besar)

Kondisi: baik (bekas), Tahun pembuatan: 1993, jam operasional: 1.400 h, Mesin putaran lambat dengan lantai dorong Motor 18,5 kW 20 pisau pada rotor hanya 1.400 jam kerja Ukuran lubang saringan masih bisa dipilih antara lubang 25 atau 30 mm Fgjdjy Im D Eepfx Airjc Sebagian sudah direkondisi Bantalan rotor baru Motor baru

Kondisi: baru, Tahun pembuatan: 2024, Hacker knives 40 x 40 concave Fgsdpfx Aobxu Dhjirec Knives for Weima, Gross ... Suitable for almost all common chippers/shredders Available from stock in Bitburg Subject to prior sale

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Einwellenzerkleinerer von Weima Modell: WL6S Fgjdpfx Ajivpthoirsc Hauptantriebsmotor: 22 kW

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, German WEIMA Crusher – Technically inspected – Year of manufacture: 1992 – Documentation available TECHNICAL PARAMETERS: Feed opening size: 800 x 1000 mm Rotor diameter: 315 mm Rotor length: 800 mm Rotor speed: 90 rpm V-rotor Main motor: 22 kW Fgjdpfeuditwsx Airoc Number of blades: 19 pcs Turnable cutting blades: 30 mm x 30 mm Screen: Ø 20 mm and 15 mm Auto-reverse Hydraulic pusher drawer Pusher drawer height: 275 mm Discharge outlet diameter: Ø 200 mm Machine dimensions (L/W/H): 210 / 160 / 180 cm Weight: 1600 kg

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jam operasional: 55 h, Machine with Special Rotor Available immediately Advantages: + Special rotor with reduced knife projection, suitable for hard and soft materials + 22 kW motor + Effective square knives *For pallets: up to max. 10 pallets per hour *Performance depends on screen and material. Considerably higher throughput for smaller wood residues. Motor: 22 kW; 400 V – 50 Hz – 3 phases Screen: 15/20 mm or as agreed (options from 10 to 40 mm available) Hydraulically operated ram Current screen perforation (15/20 mm) *can be exchanged Extraction connection Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: actual unit color may vary Weight: 1920 kg Standard features included: - Control cabinet with PLC control - Automatic star/delta starter - High-speed hydraulics - Automatic switch-off when rotor idles - Speed 70-90 rpm for high throughput - Cyclic feed control to prevent idle times - Step logic for increased hydraulic ram performance - Pertinax guides for the hydraulic ram - Vibration-dampening machine feet - CE compliant The following options are available at extra cost: - Raise shredder by 30 cm (for conveyor preparation) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control system for conveyor and overband magnet + €2,750 net (starts/stops synchronously with the shredder) - Flared feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material must be free from metals and mineral contaminants. Tool damage and/or increased wear may otherwise occur. Fjdpfxex Af Rdj Airogc

Kondisi: sangat baik (bekas), Tahun pembuatan: 1993, WEIMA WL 6 A Chipper Crusher from the German company WEIMA – after technical inspection – condition: very good – year of manufacture: 1993 – documentation included TECHNICAL SPECIFICATIONS: Feed opening: 800 x 1000 mm Rotor diameter: 175 mm Rotor length: 800 mm Main motor: 18.5 kW Number of knives: 18 pcs Reversible cutting knives: 30 mm x 30 mm HYDRAULIC PUSHER CHIPPER EQUIPPED WITH AUTOREVERSE V-rotor Screen: Ø 12 mm and 10 mm Fjdpfxsgxuvte Airegc Rotor speed: 90 rpm Inlet diameter: Ø 200 mm Feed ram height: 175 mm Dimensions (L/W/H): 230 x 140 x 160 cm Weight: 1400 kg