Formier

Weinig 200m/min Hydromat Super 30B + Feed system

Kondisi: baru, Tahun pembuatan: 2025, EN-001 Itedpjpq If Defx Afijf

Kondisi: bekas, Tahun pembuatan: 2013, Venjakob Perfect Spray Coating Line: - Manufacturer: Venjakob - Year of manufacture: 2013 - Working width: 1,300 mm - Max. workpiece length: 6,500 mm - U-shaped configuration with 180° transfer Comprising: 1. Infeed conveyor, length 3,050 mm 2. Space for sanding machine (optional) 3. VEN SPRAY PERFECT automatic spray machine, length 5,510 mm 4. Flash-off dryer OIR, length 6,000 mm 5. VEN DRY AIR JET nozzle dryer, length 4,160 mm 6. 180° transfer station with nozzle dryer 7. Fresh air supply unit for transfer station, 25,000 m³/h Itedpju Afu Rjfx Afisf 8. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 IR emitters 9. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 IR emitters 10. VEN DRY AIR JET nozzle dryer, length 5,160 mm 4 IR emitters 11. 3D UV dryer, VEN DRY UV, GA + HG 12. Discharge section, belt from UV dryer 13. Hall supply air unit, 30,000 m³/h Further information: On request

Tahun pembuatan: 2011, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Finger jointing line for cross-sections up to 200 cm² (80/240 mm or 100/200 mm), including the following components: 1. HOWIAL Tilt Destacking System - SH/4t - 1.75x1.75x6.00m - 4t – shortest length 2.50 m, semi-automatic package separation. For tilting the timber stack up to 45°. Electro-motor drive. Max. stack dimensions 1.75 x 1.75 x 6.00 m. Max. stack weight 4 t. Shortest timber length 2.5 m. 2. HOWIAL Lamella Separator VE 1 to crosscut saw. With pneumatically controlled tongues, on which material marked for defects is placed onto the underlying roller conveyor. 3. HOWIAL Grading Roller Conveyor RO-1 Digital wood moisture measuring, control and recording system for automatic acquisition and control of wood moisture using the impulse measuring method based on the electrical resistance principle. 4. Gann DMT-8 Digital wood moisture measuring, control, and recording system for automatic acquisition and control of wood moisture by impulse measuring based on the electric resistance principle. System installed in a large control cabinet, complete with inkjet printer. 5. HOWIAL Crosscut Saw AS-30 B Pneumatically controlled under-table crosscut saw with 2 automatic feed units, automatic crosscutting. Special photo cell control for detection of fluorescent line marking. Automatic waste detection possible. Saw motor power 7.5 kW Saw blade diameter 700 mm Feed drive approx. 2 x 1.5 kW Air pressure 8 bar Max. feed speed approx. 60 m/min 6. HOWIAL Belt Conveyor for cutoff waste, with profiled belt and guide plates Belt width 350 mm Belt length 2000 mm Belt speed 0.4 m/s Iedpfx Afoi Ezx Deiotf 7. HOWIAL Double Roller Conveyor RO-2, 6.00 m long Incl. transverse transport, conveyance to finger jointing system. Powered by round belt, all rollers driven. Cross-transfer chain conveyor. Eject ± moisture right, transport speed adjustable up to 100 m/min. Length approx. 6.00 m Roller width approx. 400 mm Diameter 112 mm 8. Compact Finger Jointing Machine Cook Bolinder The technical data are original from Cook Bolinder: Wood width from 75 to 245 mm Wood thickness from 20 to 105 mm Input lengths from 1 m to 6 m Cross-sections from 30 cm² to 200 cm² Pressing force 5 - 22 tons Spindle diameter 50 mm Finger joint profile 15/15 Spindle speed approx. 6000 rpm Total electrical connected load approx. 62 kW Machine weight approx. 9 tons Gluing: OEST comb system for PU Modern Telemechanique PLC control. 9. HOWIAL Roller Conveyor with Destacking Powered roller conveyor with automatic ejector and hydraulically driven destacking arms. Technical Data: Height: 920 mm Length: approx. 12,000 mm 10. Safety fence panels including safety switches 11. Finger Joint Testing Machine BSPLT-100 Testing machine for finger joint bend test according to DIN 1052-1/A1 and EN 385. Bearing distances freely adjustable, mounted measurement scale, automatic calculation of support distances in the software. Fully automatic test sequence by mouse click via PC (PC not included). Alternatively, the test process can be operated via front panel keys. Connection to any standard PC or laptop (Win 2000/XP) via supplied RS232 serial cable. Fully automatic data acquisition and protocol generation in MS Excel with graphical representation. Max. wood width: 300 mm Max. wood thickness: 140 mm Max. pressing force: < 100 kN Max. support length: 2100 mm Measuring accuracy WITHOUT DISMANTLING

Kondisi: baru, Tahun pembuatan: 2023, AUFTRAGSKAMM-20240609 Ijdpeiacbpefx Afietf

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), NEUE HERBOLD granulator Universal mill – heavy duty design - Year of manufacture: 1998 - Constructed from stainless steel - From a technical center (machine was exclusively used for testing/demonstration purposes) - Rotor diameter: 300 mm Itedpfoh Rwc Eox Afijf - Working width: 500 mm - 3 knife rows

Kondisi: sangat baik (bekas), DOUBLE-SIDED FEEDING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 horizontal upper support beam (with carriage gliding on it) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for feeding stacks of panels to the feeding station External motorized roller conveyor (receiving panels from the feeding station) Separate electrical control panel Perimeter safety fencing with safety mats Operating capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Itodpfefi Tg Hox Afief Minimum panel dimensions mm 250 x 320 (approx.) Maximum panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Kondisi: bekas, Geschwindigkeit: 0 - 80 m/min, Bearbeitungsköpfe: 7, Hobelhöhe: 100 mm, Beschreibung: Mit Schaltschrank und Hydraulikaggregat. Der Hobelautomat Waco HM200X wird zur Längsbearbeitung von Massivholz eingesetzt, wodurch unter anderem Erzeugnisse wie MDF-Platten, Kunststoffe oder ähnliche Werkstoffe entstehen können. Die Waco HM200X verfügt über dreizehn verschiedene Stationen, die an unterschiedliche Hobelbetriebsarten angepasst werden können. Iodpfx Aogrizvofistf Zur Standardausstattung gehören Vorschübe, Ober- und Untermesser sowie Seitenmesser; zusätzlich ist die Maschine mit Anlaufblöcken, Hilfsvorschub, Flachmessern, einer Faseinrichtung, einem Messerblock und einem Universalmesser ausgestattet. Die maximale Arbeitsbreite beträgt 200 mm, die Arbeitshöhe 100 mm. Die Vorschubgeschwindigkeit ist stufenlos von 0–40 bzw. 0–80 m/min einstellbar. Der Vorschub ist mit drei oberen und drei unteren Antriebswalzen ausgerüstet.

Kondisi: bekas, 3176 Planer and Moulder WEINIG Hydromat 1000 Used, Year of manufacture: 2007 6 spindles: bottom - right - left - top - top - bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Lamella finished width: 4 - 15 mm Max. number of lamellae: 16 pieces Lamella lengths: 400 - 4,000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6,000 rpm Spindle diameter: 45 mm Tool diameter: 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle vertical left 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top 15 kW, 6,000 rpm, diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle Brake motor 37 kW, 5,000 rpm Diameter: 45 mm Axial adjustment reduced to 25 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle Brake motor 30 kW, 5,000 rpm Axial adjustment reduced to 25 mm Itedpfeu Agh Sox Afiof Diameter: 45 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm All moulding spindles with high-performance bearings Electronic feed 7.5 kW Feed roller adjustment relative to left spindle, axial 35 mm Shortened roller spacing relative to right spindles Linear meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 powered rollers over table 1 powered, serrated roller in the table, side pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 powered, serrated rollers in outfeed table 2 powered, serrated rollers in the machine table Pressure beam before and discharge after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electric height adjustment for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex site near South Tyrol, without transport and installation Description and price subject to change Transport and loading by us optionally possible To avoid possible misunderstandings, inspection on site by appointment is possible and recommended Sale is as-is Technical specifications, condition description, year of manufacture, and delivery scope as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; it is sold as seen Images and videos serve as examples and do not constitute the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipment Delivery terms: ex location

Kondisi: siap digunakan (bekas), Panel length: 3200 mm, panel width: 1000 mm, max. workpiece thickness: 38 mm, min. infeed length: 500 mm. Itedsm Habdspfx Afijf

Kondisi: bekas, Tahun pembuatan: 2007, PENGHANCUR POROS WEIMA POROS TUNGGAL MODEL WLK15 MOTOR UTAMA 90KW UKURAN PISAU ROTOR 50X50 (PISAU BARU) PANJANG ROTOR 1500MM DIAMETER ROTOR 370MM Iodpfx Astqdxfjfijtf MESIN 100% BERFUNGSI SIAP DIGUNAKAN