Optimasi jalur pemotongan melintang

WEINIG Dimter Opticut S 50

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, jam operasional: 5.000 h, Fungsionalitas: berfungsi sepenuhnya, Mesin pemotong kayu presisi OptiCut S 50+ Guodpszkbmdefx Aazsf - Sistem pemakanan menggunakan rol transversal dan pendorong otomatis - Sabuk konveyor keluaran dengan 2 zona, dilengkapi dengan alat pengeluaran dan meja, salah satunya dapat dilipat - Motor gergaji 7,5 kW - Dapat digunakan untuk memotong papan/balok hingga panjang 5 meter. - Ukuran potongan maksimum 270 x 100 mm Informasi teknis dan video lebih lanjut tersedia jika diperlukan.

Kondisi: bekas, Format circular saw ALTENDORF F45 - bekas - Trolley ganda, unit scoring saw, paggaris sejajar dengan pengaturan halus, meja tambahan, penyesuaian ketinggian hidrolik, penyesuaian kemiringan hidrolik, indikator digital sudut kemiringan, indikator kecepatan, perpanjangan meja aluminium anodized, pelebaran meja aluminium anodized, topangan sudut/miring, penutup atas pelindung sempit dan lebar, rem otomatis, telah diuji debu ----- Data Teknis ----- Rentang kemiringan: 45°, panjang trolley: 3.200 mm, lebar potong: 1.300 mm, tinggi potong: 125 mm, Diameter mata gergaji maksimum: 400 mm, Kecepatan: 3.000/4.000/5.000/6.000 rpm, Daya motor: 5,5 kW, Berat: 1.040 kg Guedpfjw Nx A Iox Aazef

Kondisi: baru, Tahun pembuatan: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle shaft (milling spindle) Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with fixed, one-sided tilting spindle for tilt range from -5° to +45.5° Positioning control for height and tilt adjustment with height zeroing and offset travel Electronic position and speed indicators 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick-clamping system for cutter arbor Finely planed cast iron table with rigid frame support Control panel mounted below on rigid frame support Cutter fence 216 with total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum chip deflector lips Machine socket outlet Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Gusdsfpb Nmjpfx Aazof Spindle shaft 30 mm, non-interchangeable CE compliant GS tested

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Spindle tiltable: Yes, 0 to 45° Height adjustment: Handwheel / electric Tilting adjustment: Handwheel / electric Cutter jaw adjustment: manual Height display: Digital display Tilting angle display: Digital display Fence indicator: mechanical counter Spindle diameter: 30 mm Speeds: 3,000 / 4,500 / 6,000 / 7,000 / 10,000 rpm Motor power: 7 kW Motor brake: Yes, automatic Extraction port: 2 x 120 mm Machine length: 2,599 mm Gusdouzkxxepfx Aazof Machine depth: 900 mm Weight: 655 kg

Kondisi: bekas, Mesin perata serut dalam konfigurasi 2 sisi Gedeyid Uyjpfx Aazjuf atau 4 sisi REX HOMS Lebar kerja maks. 2050 mm Tinggi kerja maks. 310 mm termasuk cincin putar Delapan gambar dengan REX HOMS 2050 berwarna biru muda telah diperbarui dan dikirim oleh jöma beberapa tahun lalu dan merupakan sebuah contoh.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, minimax ti 55es LL - Spindle Moulder The image shows the T 55 i elite s standard version. The professional woodworking machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting. Robust steel and cast iron construction. Large-dimension cast iron spindle unit, tilting backwards up to -45°. Spindle speeds indicated by LEDs. Fast and simple speed change via eccentric clamping. Reversible spindle rotation (clockwise/counterclockwise). Height and tilt display with 0.1 mm accuracy. Heavy-duty professional fence: fine adjustment via rack-and-pinion, numerical display, aluminum fence jaws, 3-position adjustable for quick repeat settings. Scope of delivery: - Aluminum fence jaws - Curved milling guard - Table extension left and right Model: minimax ti 55es LL Item no.: 5502252 Technical Data Table dimensions: 2500 x 655 mm Gusdedqzh Ropfx Aazof Sliding table dimensions: -- Usable spindle length: 125 mm Max. tool diameter: 240 mm Max. tool diameter (retractable): 230 mm Max. cutterhead diameter (tenoning): 320 mm Spindle tilting range: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Kondisi: baik (bekas), Tahun pembuatan: 1962, large band resaw with 1250 mm wheel diameter with central cutting device 45 kW motor wheel width 120 mm Guedpfx Aofnh T Ioazsf with electric saw blade tensioning upper wheel removed for transport very good condition, as very little used, completely overhauled in 1997

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), Type of board: Tubular core boards for 3-layer parquet, board length: 2230 mm, board width: 782 mm, board thickness: 9 mm to 22 mm, board thickness tolerance: 0.5 mm/board, feed rate: 15 m to 50 m/min, capacity: 12 cycles/min, working height: 1015 mm, max. saw blade diameter: 250 mm. Including extraction system. Documentation available. On-site inspection possible. Guodpfjt Amc Isx Aazef

Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, diameter briket: 150 mm, berat keseluruhan: 3.000 kg, daya: 30 kW (40,79 hp), Performance: 450-500 kg/h Max. pressing force: 1700 kg/cm² Feedstock moisture content: 15% Length: 1800 mm Width: 1800 mm Gujdpfoqd Uy Ajx Aazof Height: 1900 mm Transport height: 2200 mm Weight: 3000 kg Total power: 33 kW

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Rover Multi Up M C S CNC Machining Centers Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on working conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H=74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H=29 mm Workpiece Passage*: Y = 1900 mm Axis Travel Paths*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Segmentation of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the 16-position rotary tool magazine and the 12-position side tool magazine. Tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for the machine PC. 6 ATS Workpiece Supports – 18 Module Carriers — 6 aluminum workpiece supports. The support movement is guided by linear guides with recirculating ball carriages. Clamping is performed on the front and rear linear guide using pneumatic cylinders. Clamping is released via a push button located on the front of the workpiece support. — 18 module carriers 132 x 132 x H 41.5 mm with independent pneumatic clamping Guodpjy Ehrxsfx Aazsf The vacuum modules can be rotated by 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA Set-Up Assistant Table for work tables up to 1550 mm. Supported manual positioning system with direction indicator and position display. — Sensors on each work table and along the X-axis of the working area. — Indication of the direction and position reached during positioning phase, mounted on each work table The system, according to work table programming, suggests to the operator the moving direction for each work table and carriage, indicating with a green LED and audible signal when the position is reached within a tolerance of ± 1.5 mm. Segmentation of pneumatic system into 2 working zones in X Machining unit with 5 interpolating axes, 13 kW (17.4 HP), with HSK F63 adapter, liquid cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting of aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions on the machine bed. Rotary tool magazine with 16 positions, mounted directly on the X machining unit. HSK F63 tool holder, equipped with an extended integrated flange, suitable for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech Tool Kit Complete set of tools for acceptance test Comprising the following 9 parts Replacement of the standard PC with a high-performance PC. Digital devices for measuring tool length for diameters up to 130 mm. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1 license WorkCenter suction cup recommendation 5-axis simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg – Immediately available –