Planer empat sisi

WEINIG UNIMAT 23E na 7 głowic

Kondisi: baru, Working width 3500 mm Working height 2300 mm Number of pressing cylinders: 4 units S&S electrohydraulic frame press type Super Options: Working widths from 3,000 mm to 5,000 mm Gijdpfjd Rzc Rox Abhsn Working heights from 2,000 mm to 3,000 mm Optional equipment available: central pressure beam, device for angled windows, counter profiles for single-part production, and much more! Please request our complete price list! Description: With automatic adjustment for mortise and tenon corner joints (other corner connections optional), CE-certified version The only fully automatic, high-performance frame press, self-adapting and does not require pre-positioning of timber. Width and height adjustments are carried out automatically, without downtime, immediately after direct placement of workpieces into the pressing area. No repositioning of the timber is necessary. Base machine features heavy-duty, welded frame construction, made from oversized, thick-walled special profiles. Guide rails for pressing corners are precision-machined for minimum wear on the pressure beams. Continuous abutment for width pressing on the stop side, unbendable design, mounted on the base frame. Continuous abutment below, highly torsion-resistant design, connected to the base frame and machine interface. Infeed height: 500 mm. All abutments are precision adjustable for absolute angular accuracy and long-term precision. Right sliding carriage with fast, motorized width adjustment, ensuring parallel travel, including automatic hydraulic locking: Central drive for horizontal and vertical size adjustment, with high input and adjustment speed and automatic width and height adjustment (optoelectronic control). 2 vertical double-acting pressing cylinders, piston diameter 50 mm, 250 mm stroke, pressure force adjustable from 400 to 2,000 kg. 2 horizontal double-acting pressing cylinders, piston diameter 40 mm, 80 mm stroke, pressure force adjustable from 250 to 1,250 kg. Upper right pressing corners are heavy-duty, milled type, with automatic corner adjustment. Free-floating press corners Contact surfaces feature glue-repellent finish. Abutment and pressure plate depth: 100 mm. 8-way holding and positioning system for fully loose placement of all single timber parts in the pressing area (no prior stacking or plugging required). Each frame component is held and positioned at two points. Automatic lift-up function enables ergonomic placement of the upper cross member even with tall frames, at an operator-friendly height. Improved work safety through ground-level operation—no ladders or steps required. All individual frame timbers are placed directly into the pressing area. Program selection options: manual motorized via pushbutton, fully automatic via optoelectronic size adjustment, including automatic pressing cycle in tandem with a safety light barrier. Automatic, cycle-controlled pressing by impulse signal: vertical pressing – release – horizontal pressing – release – vertical/ horizontal pressing. Control cabinet conveniently mounted to the left on the base frame. Fast, optoelectronic size adjustment. Compact hydraulic system adjustable from 20 to 100 bar. Freely programmable, electric hand controller for efficient operation, particularly suitable for large and complex frame designs (

Kondisi: baru, Tahun pembuatan: 2022, Exhibition machine Year of manufacture: 2022 Equipment and technical specifications: - Base machine 7402 with Pin-Jet dowel insertion function - Handheld control device - 2D barcode scanner - UPS (Uninterruptible Power Supply) - Quattro HSK package incl. 4-position tool changer - XL drilling head Gijdpfx Ajwt E Tvebhen - Double drilling spindle in Y-axis - Automatic central lubrication Location: Hochheim Availability: approx. week 32/2022

Kondisi: bekas, Tahun pembuatan: 2006, Dimensions (L x W x H): 217 x 460 x 183 cm Price: On request - Year of manufacture: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 107402 - Number of spindles [pcs]: 4 - Spindle 1: - Spindle diameter [mm]: 40 - Spindle 2: - Spindle diameter [mm]: 40 - Spindle 3: - Spindle diameter [mm]: 40 - Spindle 4: - Spindle diameter [mm]: 40 - Infeed table length [mm]: 1780 - Feed motor [kW]: 5.2 - Extraction nozzle diameter [mm]: 140 - Voltage [V]: 400 - Transport dimensions: 2170 mm x 4600 mm x 1830 mm (L x W x H) - Transport packages [pcs]: 1 Godpfjwnig Nox Abhoin Financial information VAT: The indicated price is excluding VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial items Yorick Diebels

Kondisi: bekas, Tahun pembuatan: 2021, Number of spindles: 5 units Working width: 230 mm Planing height: 160 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 6–24 m/min Control system: K2 Basic 7" touch panel KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE ----- AS NEW, DEMO MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency controlled 4,000 – 6,000 rpm - Width and height positioned by motor: left spindle – radial upper spindle – axial - Feed beam positioned by motor DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125 – 163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (tool diameter up to 163 mm): 10 – 160 mm Minimum workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Processing of workpieces depends on the following operational parameters: Material, wood moisture, tools, depth of cut, and feed speed. Adjustments to operating parameters may be necessary, if applicable. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rabbetting device: diameter difference 20–25 mm to the planing head Important: System cannot be operated without the jointing rabbet cutter Extraction port D = 125 mm Tool clamping system: Quick-clamp nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length: approx. 6 mm Speed, frequency-controlled: 4,000 – 6,000 rpm Tool diameter: 112 – 200 mm Adjustment travel (axial): 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamp nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT Godpfx Abewgwmhjhein ----- Siemens IE3 motor with inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length: approx. 6 mm Speed, frequency-controlled: 4,000 – 6,000 rpm Tool diameter: 112 – 200 mm Adjustment travel (axial): 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamp nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length: approx. 6 mm Speed, frequency-controlled: 4,000 – 6,000 rpm Tool diameter: 112 – 200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamp nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length: approx. 6 mm Speed, frequency-cont...

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Weinig Powermat 700 Tahun pembuatan: 2018 Lebar penyerutan: 230 mm Tinggi penyerutan: 160 mm Meja masuk: 2.500 mm Kecepatan pengumpanan: 40 m/menit Motor pengumpan: 7 kW Perlakuan meja: Pelapisan Marathon (dikeraskan, kecuali meja masuk dan pelat khusus) Rol penggerak di meja dengan lebar 200 mm Sistem Memory Plus untuk 500 profil Gisdpfsyg Hfljx Abhon Urutan spindle: Bawah: 11 kW Kanan: 7,5 kW Kiri: 7,5 kW Atas: 11 kW Atas: 11 kW Bawah: 11 kW Mesin dalam kondisi sangat baik.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 260 mm, tinggi penyerutan: 160 mm, diameter spindel: 40 mm, lebar perataan: 260 mm, tinggi kerja: 160 mm, daya motor pengumpan: 5.500 W, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 6.000 rpm, jenis penyesuaian ketinggian: listrik, jenis arus masuk: tiga fasa, jumlah spindel: 6, daya: 65 kW (88,38 hp), frekuensi input: 50 Hz, Perlengkapan: kabin, rem mesin, Weinig Unimat 23 E with 6 spindles, featuring hardened coating. Working width: 260 mm Working height: 160 mm Spindle diameter: 40 mm Giedpfx Aevbi Rvobhsn Feed unit: 5.5 kW / 6 – 36 m/min Spindle arrangement: 1-Bottom (11 kW) 2-Right & 3-Left (15 kW) 4-Top (11 kW) 5-Top (11 kW) 6-Bottom (11 kW) Air cushion in the table Short-piece package Four powered feed rollers in the table.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, Planer and Moulder WEINIG Powermat 700 Year of manufacture: 2020 Tool configuration: 018 (bottom-right-left-top-top-bottom) 1st spindle bottom 7.5 kW, 6,000 rpm 2nd spindle right 15 kW, 8,000 rpm 3rd spindle left, driven together with right spindle 8,000 rpm 4th spindle top 11 kW, 8,000 rpm 5th spindle top 7.5 kW, 8,000 rpm 6th spindle bottom 7.5 kW, 8,000 rpm Feed motor 5 kW Feed speed infinitely variable 5 - 40 m/min Total connected load 56.5 kW Equipment: - Comfort Set - Electronic digital display units - Grooving device - MarathonCoating for infeed table insert before the 1st spindle Giedpfx Aoyh Rhwsbhjn - Fence lip after the right spindle with quick adjustment - Top pressure roller opposite the right spindle, swing-away and spring-loaded - Reduced roller distance opposite the right spindle - Extension of pendulum shaft opposite the left spindle up to 150 mm - CNC control for adjustment of dimension (thickness and width) - Split pressure shoes before the 1st and 2nd top spindles - Frequency converter for smooth motor start-up and stopping - Infeed roller before the 1st bottom tool pneumatically controlled up/down - Air conditioning unit for control cabinet - Short infeed table, 1.20 m long, with 2 powered rollers above the table and 1 powered roller in the table - MemoryPlus with 10.1 inch screen

Kondisi: sangat baik (bekas), weinig-unimat-22e-specs-hu-it-lt Giodpfx Aeyiu R Isbhon