Planer dan moulder

Weinig 4-75 m/min

Kondisi: siap digunakan (bekas), An air-conditioned Aztech office and commercial container is available. Thermal transmittance (U-value): approx. 0.38W-0.46W/m²K, floor load capacity: approx. 100kg/m², internal height: approx. 2,500mm, external dimensions (L/W/H): approx. 3,000mm/3,000mm/2,600mm, weight: approx. 800kg. Documentation is available. On-site inspection is possible. Dodpfx Aow D Eubedgsul

Tahun pembuatan: 1997, Kondisi: diremajakan ulang (bekas), 2 pieces process design volute casing pumps 1 unit fully overhauled; pump and motor bearings replaced with new ones. Dusdpfx Aoiuznuodgsl Mechanical seal overhauled by specialist company. All gaskets replaced. Flow rate: 6 m³/h Head: 25 m Pump speed: 1440 rpm Shaft seal: Double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: Closed two-channel impeller Impeller diameter: 277 mm Bearing type: Rolling bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type, drive side: Oil Oil level monitoring for lubrication Materials: Pump casing: Duplex stainless steel Noridur 1.4593 (9.4460) Wear plate: Duplex stainless steel Noridur 1.4593 (9.4460) Discharge cover: Duplex stainless steel Noridur 1.4593 (9.4460) Shaft: Tempered steel C45+N Impeller: Duplex stainless steel Noridur 1.4593 (9.4460) Bearing lantern: Grey cast iron EN-GJL-250 Shaft sleeve: Duplex stainless steel 1.4462 Suction nozzle nominal diameter: DN 80 Discharge nozzle nominal diameter: DN 40 Nominal pressure (suction): PN 10 Nominal pressure (discharge): PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: Grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Rated power (P2): 7.50 kW Insulation class: F Motor protection class: IP55 Power factor (cos phi): 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is particularly suitable for: - Chemical and process engineering industries - Sulphuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulphurisation plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine technology

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, panjang umpan sumbu Y: 6.000 mm, Tipping trough for logs up to 6 m in length. Available from September 2024. Dodsr Iig Djpfx Adgjul

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg EQUIPMENT HIGHLIGHTS: - Controls: Temperature control (standard) Dodpfsg Ezarjx Adgsul - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures specified performance even at low flow rates) - Heating control via solid state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In the event of an incorrect water/glycol mixture, the system issues an automatic warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature controllers) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (non-ferrous metal-free option available) - All medium-conveying components and piping insulated for low-temperature application - Water-cooled condenser (air-cooled on request) OPTIONS: - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Specimen drainage using compressed air - Cooling water monitoring - Supply pressure limitation - Further special options available on request and subject to technical review Please visit our website for more details or for other performance classes. *This device complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be specified in quotations or order confirmations.

Kondisi: sangat baik (bekas), Four-sided planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm Dedpfxerigxye Adgjul 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor: 4 kW Fully adjustable heads Electrically adjustable planing height and width Spindle diameter: 40 mm Feed via cardan shaft rollers, stepless adjustment Robust planer by WEINIG Machine length: 415 cm The machine has been inspected and is in original condition

Kondisi: sangat baik (bekas), Gold-anodised plates Working dimensions: 2.5 × 1.1 m Electric heating Fully operational, tested You can call or write to us. We can speak and write in German and Russian. You may also send messages in English. 31.3.5 Dujdpfju I N D Hox Adgjl

Kondisi: sangat baik (bekas), Four-Side Planer Weinig Unimat 500 Working width: 230 mm Working height: 140 mm Number of spindles: 6 Spindle configuration: 1. Bottom 7.5 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 11 kW 5. Top 11 kW 6. Bottom 7.5 kW Total power: 56 kW Feed speed adjustable via inverter Memory system Pneumatic pressure rollers divided into 3 sections 4 rows of steel infeed rollers 2 rows of rubber outfeed rollers 1 table roller driven by cardan shaft Infeed table length: 1980 mm Work tables manufactured with Marathon Coating technology CE certificate Extraction ports: 6 x 140 mm Dujdsthk T Iopfx Adgsl Machine dimensions: 394 x 185 x 195 cm (H)

Kondisi: baru,

Kondisi: bekas, Hydraulic power unit, hydraulic pump, universal power pack -Manufacturer: H+L, hydraulic power unit for hydraulic punch -Type: DK52 1-6-250P-391K -Motor: Junginger 5.5 kW / 1455 rpm -Pressure gauge: up to 250 bar -Accumulator: Hydac 2.5 liters Dodpfx Adsf Tdt Iogoul -Hydraulic tank/filter/valves: see pictures -Dimensions: 540/630/H1210 mm -Weight: 198 kg

Kondisi: baru, *Technical Standard Specification: Heating capacity: 9 kW Cooling capacity: 50 kW Medium: Water up to 160°C Maximum external volume: 16 l at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg EQUIPMENT HIGHLIGHTS: • Smart Controller Plus 7" touch / Industry 4.0 capable • Flow metering with adjustable flow alarms • Return temperature display • Frequency converter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector, 20mA/TTY • Connection for external PT100 temperature sensor for tool temperature measurement and display • Continuous bypass of the heat exchanger using a 3-way valve to reduce scaling in the heat exchangers Duodpfx Adjftm Hrjgjl • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Boost pump for system filling at high temperatures • Fill mode can be switched from cooling water to separate filling • SSR for heating control • IP54 splash water protection Visit our website for more details or for other performance classes. *This unit complies with European directives. Other directives and standards are fulfilled only if specifically stated in the order confirmation. This technical specification reflects the standard equipment; customer-specific requirements deviating from the standard will be specified in offers or order confirmations.