Planer berkinerja tinggi Weinig Hydromat 23

Weinig Hydromat 23

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, diameter nosel ekstraksi: 140 mm, diameter poros mesin serut: 40 mm, tinggi benda kerja (maks.): 230 mm, jenis arus masuk: tiga fasa, jumlah spindel: 7, jangkauan kerja: 230 mm, diameter poros pisau: 50 mm, Perlengkapan: kabin, rem mesin, Mesin ketam empat sisi Weinig Hydromat 23, 80m/menit Lebar kerja: 230 mm Tinggi kerja: 160 mm Jumlah spindle: 7 Susunan spindle: Lhodpsxww Hmjfx Aa Uop 1. Bawah 15 kW 2. Kanan 11 kW 3. Kiri 11 kW 4. Atas 15 kW 5. Atas 7,5 kW (dengan penyangga hidrolik) 6. Bawah 11 kW (dengan penyangga hidrolik) 7. Universal 11 kW (kecepatan rotasi variabel melalui inverter) Pengaturan dimensi ketam dari panel ATS Kecepatan putaran spindle: 6000 rpm Diameter spindle: 50 mm 5 rol penggerak pada meja kerja Kecepatan maju dapat diatur dengan inverter hingga 80 m/menit Penggerak makan didorong oleh poros kopel Tekanan penekan pneumatik Dokumentasi teknis tersedia Dimensi mesin: 460x230x200 cm Berat: 6000 kg

Kondisi: hampir baru (bekas), WEINIG Hydromat H30N, S/N 253-886, year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system • Max. working width: 300 mm • Max. working height: 140 mm • Electronic stepless feed: 12 – 120 m/min • Feed motor: 22.0 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW • 6th spindle top: 22.0 kW • 7th spindle bottom: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle bottom: 11.0 kW • All spindle motors with electronic braking • COMPLETELY NEW MILLING SPINDLES • Spindle diameter: 50 mm • Spindle speed: 6,000 rpm • 6 driven rollers in the table – hard-chromed • Spindles 1 + 6 + 7 + 8 + 9 with NEW counter bearings • Hydraulic counter bearing clamping • Spindles 2 + 3 + 8 + 9 with straight jointer • Spindles 4 + 6 with pneumatic pressure • NEW feed rollers, D=170 mm • Hard-chromed table plates • Hard-chromed fences • Heavy-duty top pressure rollers – pneumatic • Heavy-duty side pressure rollers – pneumatic • Automatic table lubrication – NEW • Centralized lubrication points • NEW free-standing control panel, 5m cable • NEW free-standing control cabinet, 5m cable Lhedpfjtynpxex Aa Ujp • Operating manual, spare parts list, and wiring diagram + Many NEW spare parts / accessory components Dimensions: • Total length: approx. 6,150 mm • Total width: approx. 2,160 mm • Machine weight: approx. 9,500 kg Power supply: • Total connected load: approx. 157 kW Condition: Machine as shown in the photos – technically as new Payment: Payment in full prior to loading, net, cash in advance Delivery time: By arrangement Delivery: EXW Inspection: Possible at any time by appointment Offers and inquiries only with complete company details Subject to prior sale and errors excepted.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Weinig Hydromat 23C dengan 6 spindle. Panel listrik terpisah. Sistem pelumasan otomatis untuk meja kerja. Dimensi maksimum 140mm x 230mm. No 1. 11kW – Bawah 6000rpm + bantalan luar – jointer lurus siap pakai. No 2. 11kW – Kanan 6000rpm – jointer lurus dan profil siap pakai. No 3. 11kW – Kiri 6000rpm – jointer lurus dan profil siap pakai. No 4. 15kW – Atas 6000rpm + bantalan luar – jointer siap pakai. No 5. 11kW – Atas 6000rpm + bantalan luar – jointer lurus. No 6. 18,5kW – Bawah 6000rpm + bantalan luar – jointer lurus. Tenaga feed 7,5 kW. 6–60 m/menit (kecepatan dapat ditingkatkan sesuai kebutuhan). Spindle 50mm. Motor pengangkut 0,55 kW. Dokumentasi lengkap termasuk. Dapat disediakan dengan pisau hidro jika dibutuhkan. Ljdpfx Aajxtwl Ie Ushp Dapat disediakan dengan infeed dan outfeed jika diperlukan.

Kondisi: bekas, Tahun pembuatan: 1996, Weinig Hydromat 23 Technical Data Working width: 30 - 230 mm Working height: 19 - 200 mm Spindles: bottom, right, left, top, bottom b-r-l-t-b (bottom-right-left-top-bottom) Ljdpjqrt Ekjfx Aa Ujhp without infeed offer is for the machine only Machine has been dismantled and is available immediately Transport can be organised

Kondisi: sangat baik (bekas), JET is a numerically controlled machining centre with 5 interpolated axes, designed for the following operations: Tenoning / Finger Jointing / Drilling Lodpfxeirmyqo Aa Uohp Mortising / Milling / 4/5-Axis Profiling. Technical Data: Fully digital NC axes: 5 Interpolated linear axes: 3 Interpolated rotary axes: 2 Longitudinal axis X: 1,800 / 2,200 mm Transverse axis Y: 1,300 mm Vertical Z axis: 650 mm Length of clamping support table: 1,400 / 1,800 mm Single axis – unlimited C-axis: +/- 180°

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, Four-side planer Weinig Hydromat 23 strip laminating machine 8 spindles, Working width: 230 mm, Working height: 160 mm, Spindle diameter: 50 mm, Feed system: 7.5 kW / 6 – 36 m/min, Spindle arrangement: 1- Bottom (7.5 kW) 2- Right (7.5 kW) 3- Left (7.5 kW) with profile jointer 4- Right (7.5 kW) with profile jointer 5- Top (7.5 kW) with hydraulic clamping 6- Bottom (30 kW) with hydraulic clamping 7- Top (7.5 kW) with hydraulic clamping and straight jointer 8- Bottom (7.5 kW) with hydraulic clamping and straight jointer. Hard coating. Two driven rollers in the table. Ljdjxqh E Hopfx Aa Ushp

Kondisi: sangat baik (bekas), working width 230 mm Lhedpew Ad H Tefx Aa Uop working height 120 mm 6 heads feed speed 60 m/min head arrangement: bottom/right/left/top/top/bottom spindle motors 7.5 kW each automatic table lubrication Memory System Automatic control spindle diameter 40 mm double-sided bearing spindles the last two heads equipped with manual jointers

Kondisi: bekas, Tahun pembuatan: 2009, 32328-EN Lhodpfx Aswluhmoa Uop

Kondisi: sangat baik (bekas), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roll feed unit Planer moulder equipped with reinforced KASCHWIG three-sided sound insulation cabin • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed speed control (frequency regulated): 8 – 80 m/min • Feed motor: 18.5 KW • 1st bottom spindle: 11.0 KW • 2nd right spindle: 11.0 KW • 3rd left spindle: 11.0 KW • 4th right spindle: 11.0 KW • 5th left spindle: 11.0 KW • 6th top spindle: 15.0 KW • 7th bottom spindle: 11.0 KW • 8th top spindle: 15.0 KW • 9th bottom spindle: 15.0 KW • 10th universal spindle: 11.0 KW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindles equipped with NEW motor start/ brake combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven table rollers • Spindles 1 + 6 + 7 + 8 + 9 with counter bearing • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chrome plated table plates • Hard-chrome plated fences • Pneumatically assisted side pressure rollers • Automatic table lubrication • Centralised lubrication points Lsdewvqklepfx Aa Uehp • Freestanding control panel • Total connected load approx. 145 KW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list and circuit diagram • Machine supplied without planing heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 KG Factory-new WEINIG components installed: NEW horizontal / vertical spindles NEW counter bearings All spindles with HL bearing arrangement All motors newly fitted with bearings NEW electronic motor soft-start / brake units NEW hard-chrome plated table plates NEW hard-chrome plated fences Numerous additional NEW PARTS installed in the machine Condition: Refer to attached photos. Technically in excellent condition. Infeed mechanisation unrefurbished – complete parts – functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by prior arrangement Subject to prior sale and errors excepted.

Kondisi: sangat baik (bekas), Mesin ketam empat sisi Weinig Hydromat 23C Lebar kerja: 230 mm Tinggi kerja: 160 mm Jumlah spindle: 7 Konfigurasi spindle: 1. Bawah 15 kW 2. Kanan 7,5 kW 3. Kiri 7,5 kW 4. Atas 15 kW 5. Bawah 30 kW (ganda rip saw) 6. Bawah 7,5 kW (penopang hidrolik) 7. Atas 7,5 kW (penopang hidrolik) Kecepatan putar spindle: 6.000 rpm Diameter spindle: 50 mm 4 rol penggerak pada meja kerja Kecepatan pemajuan diatur dengan inverter hingga 36 m/menit Pemajuan didorong oleh poros kardang Penekan pneumatik Dokumentasi teknis Lodsxlcufepfx Aa Ushp

Kondisi: baru, Tahun pembuatan: 2025, CNC 2040 SPECIAL Milling Plotter is a precision machine engineered and manufactured in Poland, designed for machining a wide range of engineering materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (Dibond, carbon, Alucobond), soft metals, and more. CONSTRUCTION: The plotter is constructed entirely from high-quality steel. During the production process, all components undergo specialized heat treatment. WORKING AREA: The effective working area of our CNC machine is 2100 x 4100 mm, with the entire worktable (executed in T-slot technology) measuring 2100 x 4100 mm. Z-AXIS RANGE AND GANTRY CLEARANCE: The standard Z-axis travel is 200 mm, with the possibility to increase it up to 400 mm upon request. DRIVES: Our machines are powered by digital servo motors with high resolution and power, ensuring optimal acceleration and speeds in all directions. The X and Y axes are equipped with robust, proven helical racks, guaranteeing high durability and precision. The Z-axis is driven by a high-quality ball screw. All axes move on linear rail guides. SPINDLE: The tool is driven by a high-performance, liquid-cooled, durable brushless spindle. Spindle bearings are top-grade machine bearings, exceptionally quiet and surpassing average durability standards. The spindle rotational speed ranges from 6,000 to 24,000 rpm. Power is supplied via an inverter rated higher than the spindle, protecting against RPM drops under heavy load. Ledpfxoin Uile Aa Uohp SOFTWARE: The machine is equipped with up-to-date CAD/CAM software, enabling quick and easy component design and converting designs into G-code. Import of ready-made files from other programs is also possible. CONTROL SYSTEM: The plotter is operated via a controller with its own processor and RAM, ensuring stable and reliable performance. The controller enables active vector analysis for smooth movement with minimal processing deviation. It also features power failure recovery, allowing the machine to resume operations without reinitializing the program. The integrated memory allows for repeated use without reloading files each time. Additional options: * Vacuum table with Busch or Becker pump * Chip extraction system * Oil mist lubrication system * Customizable worktable size

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Weinig Hydromat 23C dengan 6 spindle. Panel listrik terpisah. Sistem pelumasan otomatis untuk meja kerja. Dimensi maksimum 140mm x 230mm. No 1. 11kW – Bawah 6000rpm + bantalan luar – jointer lurus siap pakai. Lhedoxgq Rdepfx Aa Usp No 2. 11kW – Kanan 6000rpm – jointer lurus dan profil siap pakai. No 3. 11kW – Kiri 6000rpm – jointer lurus dan profil siap pakai. No 4. 15kW – Atas 6000rpm + bantalan luar – jointer siap pakai. No 5. 11kW – Atas 6000rpm + bantalan luar – jointer lurus. No 6. 18,5kW – Bawah 6000rpm + bantalan luar – jointer lurus. Tenaga feed 7,5 kW. 6–60 m/menit (kecepatan dapat ditingkatkan sesuai kebutuhan). Spindle 50mm. Motor pengangkut 0,55 kW. Dokumentasi lengkap termasuk. Dapat disediakan dengan pisau hidro jika dibutuhkan. Dapat disediakan dengan infeed dan outfeed jika diperlukan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 230 mm, diameter spindel: 40 mm, tinggi kerja: 120 mm, jumlah spindel: 6, Four-Side Planer and Moulder Lodpfev T R A Dex Aa Ushp Manufacturer: Weinig Model: Hydromat 23C Year of manufacture: 2005 Working width: 230 mm Working height: 120 mm 6 spindles Spindle arrangement: bottom/right/left/top/top/bottom Spindle motors: 7.5 kW each Automatic table lubrication Automatic Memory System control Spindle diameter: 40 mm Spindles with double-sided bearings The last two heads are equipped with jointers

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, norwegian-01 Lodpfxjmgc I Nj Aa Uohp

Kondisi: sangat baik (bekas), de1 Ljdpfx Aorn Snmea Ujhp