Mesin rabat otomatis

WEINIG Univar 6 P

Number of spindles: 3 pcs.
Number of tool sets: 1.3/4.1 pcs.
Spindle diameter: 50, 40 mm
Spindle length: 120, 320, 125 mm
Weight: 2,500 kg
Loading dimensions (L x W x H): 3,800 x 1,400 x 2,000 mm
Table length: 3,470 mm
Weinig Univar 6 P
For sale on behalf of client
-----
Operating voltage: 380 Volts, 50 Hz.

For re-profiling windows, doors and similar objects with profiles that are not symmetrical all around.

Arrangement of units:
1. Climb-cutting spindle, right, pneumatically actuated.
2. Profiling spindle, right
3. Fitting spindle

The profiling spindle is suitable for accommodating several tools stacked above each other. Spindle movement is pneumatic.

For tear-free re-profiling, the first spindle operates in climb-cut mode. The last 100 mm of each frame end is machined by dipping this spindle with the appropriate tool into the wood to avoid tear-out at the frame corners.

Machine frame, tables, fences:
Machine body constructed from heavy, torsion-free and vibration-damping elements. Right-hand stops in the profiling area are made of Pertinax. In front of the profiling spindle, a split stop with sliding bar for short parts. Additional support rail for large-format frames.

Feed system:
Continuous, chainless feed system equipped with rubber rollers. Air-blast device for feed rollers and table.

Spindles, hood:
Spindles feature high concentricity and are dynamically balanced. Extraction hoods are designed for optimal chip evacuation. Quick tool change due to easy-to-open hood covers.

Machine operation, setup aids:
Machine operated from the front. Adjustment of the stops to the tool diameter is via mechanical digital readout.

Machine electrics, motors, control:
Electrical configuration according to DIN VDE 0113 – Electrical Equipment of Industrial Machines EN 60204 IEC 204-1. Other electrical standards are not considered.

Motors are dynamically balanced.

Tool position selected via rotary switch on the control panel.

Tools:
The machine is supplied with operating tools but without machining tools.

SPINDLE 1

Climb-cutting spindle
Number of tools: 1
Spindle speed: 6,000 rpm
Spindle diameter: 50 mm
Tool clamping length: 120 mm
Max. tool diameter (re-profiling): 232 mm
Tool base circle: 112–140 mm
Basic position below table: 10 mm
Motor power: 4 kW (5.5 kW)

SPINDLE 2

Number of tools: 4
Vertical spindle stroke: 3 x 80 mm = 4 tools
optionally switchable to 2 x 95 mm = 3 tools
Spindle speed: 6,000 rpm
Spindle diameter: 50 mm
Tool clamping length: 320 mm

Feed profiling unit: 8 m/min
Feed roller width: 50 mm / 35 mm
Feed roller diameter: 95 mm
Fence height: 70 mm
Working width: min. 30 mm; max. 220 mm
Working height: min. 30 mm; max. 100 mm
Workpiece length without tenons: min. 245 mm

Max. tool diameter:
With base circle 112 mm: 210 mm
With base circle 140 mm: 232 mm

Max. tool diameter (re-profiling): 232 mm
Tool base circle: 112–140 mm
Basic position below table: 10/5 mm
Motor power: spindle: 11 kW; feed: 1.1 kW

Feed of profiling unit: stepless 6–12 m/min
Feed roller width: 50 mm
Feed roller diameter: 95 mm
Isdjxpi Elspfx Adqjih
Fence height: 70 mm
Working width: min. 30 mm; max. 220 mm
Working height: min. 30 mm; max. 100 mm
Workpiece length without tenons: min. 245 mm

Special equipment:

3 mechanical spindle br...

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.