Walk-in, volume 5 m³

Weiss Technik Klima-Prüfkammer WK 5/55-120 -55°C bis +120°C

Kondisi: sangat baik (bekas), en-GB Dujdotr Dinjpfx Ahujr

Kondisi: bekas, GOM - ATOS III Rev.02.1 - Alat Ukur 3D Kondisi: bekas, sangat baik. Data teknis: Sistem kamera: 2 x 8.000.000 Resolusi kamera: 2048 x 2048 piksel (sekitar 4 megapiksel) Ukuran bidang ukur XYZ: 150 x 150 x 100 mm hingga 2000 x 2000 x 2000 mm Jarak titik pengukuran: 0,075 mm hingga 1,0 mm Waktu pemindaian: sekitar 2 detik Volume pengukuran: 700 (termasuk pelat kalibrasi) Teknologi Blue-Light: Pengukuran presisi tanpa terpengaruh cahaya sekitar. Dsdpfxjxr Umgj Ahueur Termasuk perangkat komputer dan USB dongle Versi perangkat lunak 2023 Termasuk sistem Tritop (kamera, 2x mistar 1m, lisensi) Semua dalam koper asli Dengan tripod, PC, rak, monitor, perkakas kecil, titik referensi, 1x penyangga Sambungkan dan langsung siap digunakan…

Kondisi: sangat baik (bekas), Feutron Type: 3702/06 Climate Test Chamber, Water-Cooled Technical Specifications: Test Chamber Nominal Volume: 2.0 m³ Dimensions: Outer test chamber, with humidifier console Width: 2970 mm Height: 2370 mm Depth: 1530 mm Rear panel Minimum installation dimensions: Width: 2970 mm Height: 2390 mm Depth: 1550 mm Test chamber internal dimensions: Width: 2000 mm Height: 1000 mm Depth: 1000 mm Doors: Double-leaf, clear opening width 2000 mm, height 1000 mm Heated viewing windows, 2 units, width 500 mm, height 600 mm Feedthrough opening, 1 unit, left side wall, Ø 75 mm Temperature range: -40...100°C Climatic range: 10...95°C Temperature variation, over time ≤ ± 0.5...± 1.0 ΔN/K Change rates measured in air supply without load: Cooling up to 2.0 average K/min Heating up to 2.0 average K/min Humidity range: 10...95 % r.h. Humidity variation, over time ≤ ± 3.0 % r.h. Dew point range, temporarily up to -5...95°C Refrigeration unit: water-cooled, semi-hermetic Bitzer unit Refrigerant: R507 (Μ-Κ1) Climate and dryer refrigeration unit air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/PE.AC, 50Hz Plug: CEE 5-pin, 32 A, with 5.0 m cable Max. simultaneous power requirement: 10.0 kW Dedjk E Hnqspfx Ahusur Supply line fuse: 3x 25, Char, C A Protection class IP20 Weight: 1300 kg Condition: used Scope of supply: (see pictures) (Alterations and errors in technical data, information subject to change!) We are happy to answer further questions by phone.

Kondisi: sangat baik (bekas), Vötsch Model: VCL 7003 Climate Test Chamber, Air-Cooled Test Chamber Volume: approx. 34 liters Performance Specifications for Temperature Testing: Temperature range: -70 to +180°C Temporal temperature fluctuation: ±0.3 to ±1.0 K Spatial temperature uniformity: ±0.5 to ±2.0 K Heating rate: 4.0 K/min Cooling rate: 3.0 K/min Maximum heat compensation: 550 W Temperature calibration points: +23°C and +80°C Performance Specifications for Climate Testing: Temperature range: +10 to +95°C Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Duedpfx Ahsv Tnd Souer Temporal temperature deviation: ±0.3 to ±0.5 K Spatial temperature uniformity: ±0.5 to ±1.5 K Climate calibration values: +23°C / 50% r.h. and +95°C / 50% r.h. Test Chamber Dimensions (W x D x H): 350 mm x 300 mm x 310 mm External Dimensions (W x D x H): 640 mm x 750 mm x 1730 mm Electrical connection: 1/N/PE AC 230 V ±10 %, 50 Hz Rated current: 11.0 A Max. rated power: 2.5 kW Sound pressure level: 59 dB(A) Refrigerant: R-404 A / R23 Weight: approx. 130 kg For your security as a buyer, please note the following information! The following steps are performed on all our chambers prior to sale: 1. Function check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to change and errors in technical data and information!) For further questions, please do not hesitate to contact us by phone.

Kondisi: sangat baik (bekas), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without thermal load): 10...85°C Temperature deviation over time during temperature operation: ≤ ± 0.5 K/min Temperature deviation over time during climate operation: ± 1.0... ± 1.5 K/min Change rates: Heating: average 2.0 K/min Cooling: average 2.0 K/min The IEC 1646 standard can be tested, for solar modules up to a max. weight of 160kg and with non-linear ramps (setpoint steps). Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95% r.h. Humidity deviation over time: ≤ ± 3.0...±5.0 % r.h. Dew point range: 8...80.9°C Test chamber Test chamber volume: 7.0 m³ Dimensions Test chamber internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Hinged door DIN right, heated, Width 900 mm x Height 2100 mm Viewing window, heated with blackout shutter and lockable, Width 500 mm x Height 600 mm Feed-through opening: 2x front right, ∅ 75 mm Radiation unit test chamber Cut-out: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area with SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system Bitzer compressor, semi-hermetic, 2-stage, air-cooled Condenser: split condenser (outdoor installation, winter control) Refrigerants: R507 / R23 Temperature control system Cooling brine medium Tyfocor / water Mixing ratio: 50/50% Brine density: 1.072 kg/dm³ Filling volume: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply test chamber Electrical connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power requirement: approx. 32.0 kW Circuit breaker: 3x63, Char C (A) Dodjklv H Iopfx Ahuour Power supply SolarConstant Electrical connection: 400V, 3/N/PE, AC, 50Hz Connection type Max. simultaneous power requirement: approx. 30.0 kW Circuit breaker: 3x63, Char C (A) External dimensions of the test chamber, complete with: machine room/control cabinet and control cabinet for SolarConstant 2500 Machine room external dimensions: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber, total: approx. 2700 kg Condenser weight, empty: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) Further questions can be answered by phone.

Kondisi: sangat baik (bekas), Vötsch Vötsch Industrial Tempering Oven VTL 200/250/225 250°C 11.25 m³ 58 kW – Heating Cabinet The oven will be available at a later date. Description: For sale is an industrial tempering oven / heating cabinet from Vötsch Industrietechnik GmbH. This unit is ideal for industrial tempering, drying, and heat treatment processes. The large usable chamber allows for the simultaneous processing of large or multiple components. The oven is controlled via a JUMO IMAGO 500 controller, providing precise temperature control as well as automated programs. Typical applications: Industrial production Plastics and metal processing Component drying Heat treatment Testing / material analysis Laboratory and experimental uses This system is of robust industrial quality and suitable for continuous operation. Duodpfxeytrzfo Ahujr Technical Data: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 200/250/225 Maximum temperature: 250 °C Temperature safety class: TB Class 1 TWB Class 2 Interior: Usable volume: 11.25 m³ Internal dimensions: Width: 2000 mm Height: 2500 mm Depth: 2250 mm External dimensions: Width: 2900 mm Height: 3530 mm Depth: 2700 mm Load: Chamber load capacity: 400 kg Floor surface load: 1000 kg Weight Net weight: 1850 kg Electrical Data: Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated current: 90 A Rated power: 54 kW Connected load: 58 kW Additional Data: Minimum exhaust air flow: 600 m³/h Reduced exhaust air flow: 150 m³/h Purge time: 465 s Total steam chamber: 14.9 m³ Sound pressure level: < 70 dB(A) Temperature limiter shut-off temperature: 280 °C Adjustable temperature limiter: 270 °C Weight: 1850 kg Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in the technical data. All information is subject to change!) For further questions, please do not hesitate to contact us by telephone.

Kondisi: sangat baik (bekas), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C, Water-Cooled Product Description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. This chamber is ideal for rapid temperature cycling tests (e.g., according to IEC, MIL-STD, JEDEC) and has been well-maintained. Chamber Volume & Internal Dimensions: Test volume: 60 liters Interior basket/test space (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature Ranges & Cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate: up to 17 °C/min Cooling rate: up to 3.7 °C/min Single mode (cold zone only) heating rate: approx. 3.2 °C/min Temperature Deviation & Uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / Payload & Lifting System: Basket/lift system load: 20 kg maximum load Transfer basket protected by safety grilles on all sides Additional Features & Specifications: Noise level: approx. 58 dB(A) in operation Control: touchscreen, RS-232 / USB / Ethernet interfaces Electrical Connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power approx. 8.5 kW Rated current approx. 25 A External circuit protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg For your safety as a buyer, please note the following information! The following measures are carried out on our chambers prior to sale: 1. Functional check and replacement of necessary components 2. Recharge with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Dusdpfx Aoxr A R Tohuor Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), CTS CW-60/11 – Climate Test Chamber, Water-Cooled The CW-60/6 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description This climate test chamber allows the functionality or material properties of a test item to be assessed under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculation volume ensures optimal heat and moisture transfer to the test object. The air handling unit is located at the rear of the chamber, while the refrigeration units are mounted in a separate frame behind the system for easy access. The control system is housed in its own separate control cabinet, with the user interface integrated into the control cabinet door. For chamber dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test area can be purged with fresh air using a blower system. Technical Specifications: Temperature Testing: - Temperature range: –60 °C to +90 °C - Temporal temperature deviation: ±0.5 to 1 K - Spatial temperature deviation: ±1 K at 200 mm distance from the wall - Rate of temperature change (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C; Cooling: 2 K/min from +85 °C to –40 °C Climatic Testing: - Temperature range: +10 °C to +95 °C - Humidity range: 10% to 95% RH - Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±2 – ±5 % RH - All data given without thermal radiation and at steady-state conditions - Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, without radiation, and without additional equipment. Dsdpfsx Anipex Ahuour Dimensions: Internal dimensions (test chamber / usable space): - Volume: approx. 11,000 liters (11 m³) - Approx. internal: Width: 2,100 mm; Depth: 2,530 mm; Height: 2,200 mm (slightly variable depending on configuration) External dimensions: Width: 2,700 mm; Depth: 5,200 mm; Height: 2,520 mm (can vary depending on doors, frame, accessories, etc.) Operating Data: - Nominal power: 84.4 kW - Nominal voltage: 400 V 3/N 50 Hz - Nominal current: 131.4 A Technical Features: Refrigeration unit: - Water-cooled, low-noise, semi-hermetic, infinitely variable performance adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Weight: 6,000 kg Notes: - Inspection by appointment possible (46325 Borken) - Shipping by freight carrier possible – costs and arrangements upon request - Scope of delivery: (see image) - (Specifications and data subject to modification and errors) - For further questions, feel free to contact us by phone.

Kondisi: baik (bekas), 1 Duedpfx Asw Ib Uwshujr

Kondisi: sangat baik (bekas), Weiss Climate Test Chamber WKL 100/70 -70°C to +180°C, Humidity, 100 Liters Compressor has been replaced!! Air-cooled For sale is a professional climate test chamber from Weiss Umwelttechnik. This unit is ideal for material testing, climate tests, as well as temperature and humidity simulations in industry, laboratory, or research & development. The test chamber provides precise testing conditions across a wide range of extreme temperatures and high humidity levels. Specifications for temperature tests: Temperature range: -70 to +180°C Temporal temperature deviation (center of usable space): ±0.3 to ±1 K Temperature uniformity (spatial, relative to setpoint) from Tmin to +150°C: ±0.5 to ±2 K Temperature change rate: Heating: 3.5 K/min Cooling: 3.5 K/min Heat compensation: max. 700 W Specifications for climate tests: Humidification system: Reservoir capacity: approx. 13 l Water quality: demineralized pH value: 6–7 Conductivity: max. 20 μS/cm Water consumption at constant temp. +40°C, 92% rH: 2 l / 24 h Temperature range: +10 to +95°C Humidity range: 10 to 98% rH Temporal temperature deviation (center of usable space): ±0.3 to ±0.5 K Temperature uniformity (spatial, relative to setpoint): ±0.5 to ±1.5 K Temporal humidity deviation (center of usable space): 1 to ±3 % rH Internal dimensions: Height 400 mm x Width 470 mm x Depth 345 mm External dimensions: Height 1776 mm x Width 745 mm x Depth 980 mm Mechanical load data: Maximum load of chamber floor: 10 kg Per rack: 10 kg Total rack support load: 50 kg Operating data: Chamber lighting: Halogen bulb 24V, 50W Rated voltage: 1/N / PE AC 230V ±10% 50 Hz Rated power: 3.5 kW Rated current: 15.2 A Main fuse required: 16A slow blow Protection rating: Control cabinet IP 22, operating panel IP 54 Heat emission (air-cooled test chambers): Djdpfx Ahsyw Nnfjuour Max. heat dissipation to room: 2500 W Noise level: Sound pressure level (free-field at 2 m distance from front, at 1.0 m height): approx. 59 dB(A) Feedthrough: 50 mm ∅ Interfaces: Ethernet (RJ45), USB Refrigerants: R404A / R23 Test chamber volume: approx. 100 liters Weight: 210 kg For your safety as a buyer, please note the following information! The following steps are carried out on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data and specifications may be subject to change and errors!) Further questions can be answered gladly by phone.