Broaching machine
Wiemers SR 30

Name: Wiemers SR 30
Brand: Wiemers
Availability: InStock

Tahun pembuatan

2025

Kondisi

Baru (berfungsi sepenuhnya)

Lokasi

Hövelhof

Data dasar

Nama mesin:: Broaching machine

Pabrikan:: Wiemers

Model:: SR 30

Tahun pembuatan:: 2025

Kondisi:: baru

Fungsi:: berfungsi sepenuhnya

Harga & Lokasi

Lokasi:: Mergelweg 206, 33161 Hövelhof, Deutschland

Hubungi

Rincian teknis

Dimensi dan berat

Berat keseluruhan:

480 kg

Tinggi total:

1.680 mm

Detail tenaga

Tegangan masuk:

400 V

Frekuensi input:

50 Hz

Bahan/produk yang dapat diproses

Diameter benda kerja (maks.):

800 mm

Detail lebih lanjut

Panjang broaching:

1.000 mm

Jumlah posisi broaching:

Kecepatan mundur:

100 mm/dtk

Kecepatan broaching:

3 m/menit

Rincian penawaran

ID iklan:: A19653586

Nomor referensi:: WAG 3104

Pembaruan:: terakhir pada 25.07.2025

Deskripsi

Manufacturer: Wiemers AG
Model: SR 30 /1000 Machine No.: WAG 3104
Year of manufacture: 2025 Weight: 480kg

General / Technical Data:
New vertical broaching machine by Wiemers
SR 30 (100% compatible with Rausch RS 3)
Tensile force: 30 kN (3,000kg)
Broaching speeds: 3m/min & 6m/min
Return speed: 6m/min
Maximum stroke: 1000mm
Maximum tool length: 1200mm
Table size / Working area: 430mm x 320mm / 340mm x 220mm
Table aperture: Ø 90mm for standard broaching arbors "System Rausch"
Workpiece diameter: unlimited (removable coolant swivel system)
Broaching capacity / keyway width: up to 20mm in steel (from 16mm broaching tool width only with stepped tool shank)
Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height from floor without attachments)
Motor: 2.5kW/3.0kW, 2-stage for 2 working speeds
Power supply: 400 Volt / 50 Hz

Equipment:
- Gear motor drive with 2 working speeds
- Reinforced draw bridge made from tool steel for higher tensile forces
- Safety door with door interlock, safety interrogation and safety monitoring
- Easily removable chip chute with tool extraction protection and parking facility
- Externally adjustable tool length setting system (reproducible across machines)
- Protective covers for stroke adjustment and electrical switching units
- Oil-tight tray on the control cabinet
- Electrical sensing of clamping jaws (tool extraction monitoring prevents unintentional retraction of the draw bridge – extra safety for operator and tool)
- Integrated coolant system with electrically switched solenoid valve and drain tap
- Coolant swivel system with automatic coolant switching via the swivel system
- Extra reinforced chip basket and chip screen with magnetic insert
- Stainless steel control panel with permanent labelling
- 4 central lubrication points for trapezoidal spindle drive with manual grease gun
- Electrical preparation for external control element (16-pin connector)
- Provision for automatic clamping jaw opening during profile broaching with roller lever
- Machine documentation with “CE” declaration of conformity
Dcsdpfxew D E Twe Aavep

Optional extras:
- Automatic clamping jaw opener for easier tool extraction during profile broaching
- Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600mm
- External electrical operating unit for broaching and return stroke, as well as emergency stop functionality

Note:
The machine is 100% compatible with Rausch broaching machines of the same performance class in the RS 3, RS 4, and RS 6 series available on the market. All fixtures, tools or arbors can be used 100% interchangeably.

General information:
The double spindle drive ensures a smooth and centered pulling force as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 20mm. (From 16mm keyway tool width only with stepped tool shanks)

The design of the machine allows for fast and easy setup for broaching with flat broaching tools for keyways.

Thanks to the universally constructed drawbridge and machine table, broaching with both profile and flat broaching tools is possible. Profile broaching can be performed without the use of additional pull heads, by using simple centering bushings.
Suitable broaching tools and arbors for the machine are available on request.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Dokumen

19653586-01.pdf

Penyedia

Terdaftar sejak: 2003

172 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+49 5257 ... iklan

Faks:

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Hövelhof

11.128 km

Mesin broaching
Rausch / WiemersSR 30

Hubungi

Iklan kecil

Agios Athanasios

10.049 km

MESIN BROACHING
BROACHING MACHINE

Hubungi

Iklan kecil

Mesin broaching vertikal, mesin broaching Henning U6 /1000

Hövelhof

11.128 km

Mesin broaching vertikal, mesin broaching
HenningU6 /1000

Hubungi

Kondisi: bekas, Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 17065, manufacturer: Henning model: U6/1000 machine no.: 17065 year of manufacture: 1979 gross weight: 1,100 kg general / technical data: used mechanical vertical broaching machine Henning, in operational condition drawing force: 6,000 kg (60 kN) broaching speeds: 3 m/min and 6 m/min return speed: 6 m/min maximum stroke: 1,000 mm maximum tool length: 1,200 mm Dedpfx Aoup Uzfsavecp table size / working area: 600 x 460 mm / 480 x 340 mm table opening: Ø 170 mm with eccentric table insert featuring Ø 90 mm borehole for standard broaching mandrels (Rausch system) workpiece diameter: unlimited dimensions (h x w x d): 1,650 mm x 1,200 mm x 700 mm (height = table height to floor, excluding superstructures) motor: 7.4 / 10 kW power supply: 380 Volt / 50 Hz accessories / special equipment: - integrated coolant system - return stroke control with dual activation mode - machine documentation - automatic jaw opener at lower pull bridge position (for tool removal) - tool clamping with universal jaws for flat shanks DIN 1416 BL 6 remarks: The machine is in its original condition and functionality has been tested. The machine is mechanically driven via trapezoidal thread spindle and geared motor. Unlike most mechanically driven broaching machines, in which the trapezoidal spindle forms both the drive and guide element, this machine features additional guide columns. As a result, the machine is additionally column-guided and very robustly constructed. The double spindle drive is ideal for maintaining a constant cutting speed even at higher drawing forces. The machine is in stock at our warehouse and can be inspected under power.

Lihat detail

Iklan kecil

Mesin broaching Hoennema HSR 9 x 1250 RST

Neulingen

11.190 km

Mesin broaching
HoennemaHSR 9 x 1250 RST

Hubungi

Tahun pembuatan: 1991, Kondisi: siap digunakan (bekas), Y 018 broaching machine – vertical Djdpfshf A I Nex Aavjcp Manufacturer: Hönnema Model: HSR 9/1250 RST Machine number: 166/HM 510275 Year of manufacture: 1991 Pulling force: 9 tons Stroke: 1,250 mm Footprint: approx. 230 x 120 cm With automatic feed External broaching with device possible

Lihat detail

Iklan kecil

Mesin broaching Rausch Räummaschine RS 6 G

Hövelhof

11.128 km

Mesin broaching
Rausch RäummaschineRS 6 G

Hubungi

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Tensile force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / working surface: 610 x 470 mm / 520 x 320 mm Table bore: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,250 mm x 850 mm x 1,200 mm (h = table height to floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional changes/optimisations made to the original machine: - External stroke adjustment - New cross-machine, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety guard door with monitoring (integrated in the emergency stop circuit) - Machine enclosure below the guard door, with chip guard and tool storage area - Electrical probe for clamping jaws (tool removal check to prevent unintentional retraction of the pull bridge) - Coolant swivel system with switching solenoid valve during the swivel process (enables coolant to be switched on before broaching stroke is initiated » visual check of lubricant flow—no dry cut!) - Routing of electrical cables in steel protective conduits - Heavy-duty control cabinet bracket for machine components - Additional oil-tight tray mounted on the control cabinet - Three-sided splash guard cabin (w = 960 x d = 450 x h = 590 mm) - Reinforced chip screen with magnetic separator - Operating panel made of stainless steel sheet with durable labeling - Four central lubrication points for the trapezoidal spindle drive Remarks: The machine has been completely overhauled; the machine body is fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze - All bearings and seals replaced - The coolant system (pump, solenoid valve, drain valve), including the coolant/lubricant swivel system, is new - The clamping jaws are new - The complete electrical system (control cabinet) is new - All covers and enclosures are new Dcsdpfx Aaew Ighisvsp - The following components have been overhauled and reused: -- Machine base -- Machine stand -- Machine table with table insert -- Pull bridge (clamping jaws are new) -- Gear wheels -- Electric motor (new brake, new bearings) The machine is in stock at our warehouse and can be inspected under power. The images attached are original photos of the machine. The machine is CE certified. The CE certificate corresponds to the 1998 standard (first overhaul).

Lihat detail

Iklan kecil

Tönisvorst

11.289 km

Mesin dudukan kunci

Hubungi

Kondisi: sangat baik (bekas), Broaching machine Hydraulic Make: Polymat Model: 50/400 Dcjdpfx Aaowxvb Iovop Keyway width: 3–50 mm Bore diameter: 13–500 mm Max. broaching length: 400 mm Broaching force: 3 MP Table load capacity: 10 t Stepless cutting speed from 0–20 m/min 11 feed rates from 0.01–0.15 mm 380 volts 5.5 kW Accessories: - Various broaching tools - Enlarged clamping table 700 x 700 mm - Jib crane for depositing the tool guide bar - Operating manual - Electrical schematic Transport dimensions: Length: 1500 mm Width: 1100 mm Height: 2340 mm Weight: 2200 kg

Lihat detail

Iklan kecil

Hövelhof

11.128 km

Mesin broaching
RauschRS 4 / 1000

Hubungi

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, tegangan masuk: 400 V, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580kg Overhauled: 3/2023 by Wiemers AG General / technical data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current "CE" marking Pulling force: 40 kN (4,000kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / working area: 540 x 340mm / 450 x 250mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,350mm x 900mm x 1,000mm (with splash-guard enclosure) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / special equipment: - Dual-speed drive - Safety door with interlock and chip chute - Chip chute with integrated tool tray - Electric clamping jaw sensing (tool removal control to prevent unintentional return of the carriage) - Integrated coolant system with solenoid valve (operated via pivot system) - Patented coolant/lubricant pivot system - Externally adjustable tool length setting system (reproducible across machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broach tools (keyway tools) - Three-sided closed splash guard enclosure with tool tray (ideal for profile broaching) Dodpjw H Dgnjfx Aavscp - External control panel (connected via Harting connector) Note: The machine has been completely overhauled, and the machine body fully refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, check valve, and drain cock) including the coolant/lubricant pivot system is new - Coolant supply is controlled by a solenoid valve, which can be operated via the pivot system - The carriage as well as clamping jaws and gear segments are new - A switchable clamping jaw monitoring system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal indicator, and door locking mechanism - The tool length setting system has been relocated outside the machine enclosure - Additional limit switches have been installed - The complete electrical system (control cabinet) is new - No PLC is installed; the machine is electrically maintenance-friendly - New drive motor (by SEW Germany) with brake - The machine has been newly painted with 2-component structural paint General: The double spindle drive ensures smooth and central pulling as well as a constant broaching speed (broaching speed selectable at 3 m/min or 6 m/min). Due to its design, the machine is quick and easy to set up for broaching with flat broach tools for keyway machining. Thanks to the universally designed carriage and machine table, both profile and flat broaching can be performed without the need for additional pull heads.

Lihat detail

Beriklan di sini