Wildgoose, Slowbeer ENOSEURO Craft Can Abfülllinie für Glasflaschen (Einweg) (2016)

Wildgoose, Slowbeer Abfülllinie für Glasflaschen (Einweg)

Tahun pembuatan: 2026, Kondisi: baru, The pasteurization unit is fully automated by an industrial control system and operated via a touchscreen interface. If the temperature of the juice drops below the desired pasteurization level, the machine’s output side is shut off and the juice is rerouted through a bypass until the target temperature is restored. Bottling can then continue. At the end of operation, the pipe coil can be easily cleaned using a sponge ball. Our system requires minimal maintenance. ⚙️ Technical Specifications Ppodpfx Aev Srl Renwjt Nominal capacity: 400 L/h Power consumption: 27 kW, 400 V, 40 A Material: Wnr. 1.4301, AISI 304 stainless steel Water buffer tank: 80 L Dimensions: Length: 760 mm Width: 714 mm Height: 1637 mm Weight: 170 kg Optionally available with filling units.

Kondisi: bekas, Tahun pembuatan: 2015, Overview The Kosme / Krones Barifill is an isobaric filler currently operating in a German brewery, where it can be seen in action. The machine was manufactured by Kosme in 2015 and installed in 2016. It has a maximum output of 8,000 bottles per hour, with the manufacturer’s rated speed at 7,000 bottles/hour. The system is designed for 26-mm crown caps and is equipped with 30 filling stations. Technical Data Capacity: 8,000 bottles/hour (for 0.33-liter bottles) Closure type: 26-mm crown caps Formats: Psdpfx Aev Ic Uzenwept - 0.5 NRW - 0.5 Long Neck - 0.5 Lochmund - 0.33 ALE - 0.33 SUD - 0.33 Steinie swing-top Filling stations: 30 Electrical Specifications: - Max. voltage: 3x400 V + N + GND 50Hz - Power consumption: 13.00 kW Operating hours: 18,393 (as of March 2025) Included spare parts: - Drives - Gearboxes - Cardan shaft - Others Annually serviced by Kosme/Krones - Hoist cylinder replaced in 2024 - Valves and capping unit serviced in 2025 Features: - Bottle shower - High-pressure foam injection - Bottle stoppers - Table rinsing system - Crowner cap container

Kondisi: bekas, Tahun pembuatan: 2018, Overview This compact automated can filling line was built with main components from KHS, Ferrum, Ska Fabricating, and Atlanta. The system is designed for the production of beverage cans and includes depalletizing, can conveyor system, ionized air rinsing, filling, seaming, as well as downstream film and shrink wrap packaging. At the heart of the line is a KHS Innofill Can C filler combined with a Ferrum FC03 can seamer. The system is integrated with overhead and floor-mounted can conveyors and arranged in a compact production layout. Technical Specifications Manufacturer / Main Components: KHS / Ferrum / Ska Fabricating / Atlanta System Type: Automatic can filling line Number of Filling Valves: 21 Number of Seaming Heads: 3 Container Type: 330 ml, 440 ml, 500 ml standard cans Packaging Type: Loose cans in 12-count and 24-count trays as well as wrap-around cartons Year of Manufacture: 2018 Operating Hours: 3,446 h Layout: Compact filling system with overhead and floor-mounted conveyor sections Scope of Supply Can depalletizer | Ska Fabricating Co. | – | Closed depalletizing system with safety features | 2018 Can conveyor system | KHS / AE | – | Overhead and floor-mounted conveyor network for empty cans and line transfer | 2018 Ionized air rinser | Ska Fabricating Co. | AV-C500 | Rinsing/cleaning module for empty cans prior to filling | 2018 Can filler | KHS | Innofill Can C | Automatic can filling system | 2018 Fill level detection | Heuft | – Can seamer | Ferrum | FC03 | Rotary can seamer | 2018 Can dryer | Air Control Industries | 2018 Labeling machine | Pack Leader Advanced Dynamics | Pro-516 | Labeler incl. roll feed | 2018 Carton packer | Atlanta | Rafaello 726 | Packaging system | 2018 Carton printer | SATO | S86-EX | 2018 Pjdpfx Anjy Tt H Dewopt

Kondisi: bekas, Tahun pembuatan: 2014, Overview  This complete isobaric bottling line was manufactured in 2014 by Italian producer Eurostar and is located in Mexico. The line consists of a triblock unit (rinser, filler, and capper), a self-adhesive labeller, and conveyor belts. It is being sold due to the acquisition of a new, higher-capacity system. The line has already been dismantled. Technical details  Output: Max. 6,000 bph Formats: 0.210L, 0.355L, 0.500L glass bottles 26mm metal crown caps Dimensions: Width: 5,300 mm Depth: 2,630 mm Height: 2,860 mm Weight: 8,000 kg POWER SUPPLY: Main power: 460V - 60Hz - 3Ph+N+PE Auxiliary voltage: 24V DC Main motor power: 4 kW Installed power: 9 kW Scope of delivery  Triblock (rinser, filler, and capper) Self-adhesive labelling machine with 2 stations Conveyor belts Pjdpfx Anevm U Dlewjpt

Tahun pembuatan: 2019, Kondisi: siap digunakan (bekas), de-hu-001 Ppedpsxqqmgefx Anwot

Kondisi: bekas, Tahun pembuatan: 2011, Overview This complete bottling line was designed for NRW and Euro bottles as well as crates and pallets, offering a capacity of up to 7,500 bottles per hour. The machines are from various years of manufacture between 1992 and 2022 and have low operating hours. The plant will remain in operation until the end of May and can be inspected in person. Technical Details Podsv Icubopfx Anwjpt Capacity: Up to 7,500 bottles/hour Supported bottle formats: 0.33L & 0.5L (NRW, Euro, Ale) Supported crate formats: NRW and Euro crates Scope of delivery Depalletizer & Palletizer | Flema | Star C-LC | 1996 (500 crates/h) Crate unpacker | RICO | UNO 1-head 124 | 2010 (350 crates/h) Screw capper/Cork remover | ADELSKI | PPE 2005 | 1995 (2,000–12,500 bottles/h, 8,500 operating hours) Bottle washer | PAC | CB 14-0.5l-R-7 LII Compact | 1998 (7,500 bottles/h, 14,175 operating hours) Bottle inspection unit | SYSCONA | LC 10 FD | 2007 (caustic monitoring & metal detection) Filler | ICS | multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 | 2011 (6,000 bottles/h, 7,200 operating hours) Labelling machine | ANKER | Roland 8/3 | 1998 (7,000 bottles/h, 14,500 operating hours) Inkjet coder | Keyence | MK-G1000 | 2022 (currently set up for dating on labeller ANKER Roland 8/3) Crate packer | RICO | UNO 1-head L-machine | 2012 (300 crates/h) Premixer | Jakü | PM-E-30-2k | 1992 (35 hl/h, degassing & carbonation) Crate washer | RICO | 2500 1-bath | 2012 (600 crates/h) CIP tanks | - | - | 2012 (2x 6 hl, steam-heated)

Kondisi: bekas, Tahun pembuatan: 2018, jam operasional: 3.500 h, nomor mesin/kendaraan: LC636, Used KHS Innofill Can Line 16,000 CPH – Year of Manufacture 2018 Technical Specifications & Performance Data This complete used filling line is a second-hand can filling system, centered around a KHS filler block and integrated with high-quality upstream and downstream packaging technology. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans. Production speed: up to 16,000 cph (cans per hour) Main filler: KHS Innofill Can C (2018) Can seamer: Ferrum FC03 (2018) Depalletizer: SKA Fabricating Can-I-Bus Ppjdpfx Aoy Szbyenwst Inspection system: Heuft fill level detector Rinser: AV-C500 can air rinser Dryer: Air Control Industries can dryer Labeler: Pack Leader (Advanced Dynamics system) Carton packer: Atlanta Rafaello 726 Carton coding: SATO S86-EX printer Conveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PC Utilities/peripherals: Conveyor lubricator (Loewados) Container type: Aluminium cans Documentation: Printed manuals included Advanced Automation & Control Systems The line features separate control cabinets for conveyors and labelling, supporting coordinated start/stop logic and gentle product handling. The KHS Innofill Can C filler block provides a modern automation architecture with line-friendly integration, recipe management, and synchronized drives for consistent filling and seaming processes. Safety locks and protective devices are installed at key points to protect operators and ensure process reliability. Production Line Integration Capabilities This packaging line offers end-to-end integration from depalletizing to cartoning, enabling seamless can flow through rinsing, filling, seaming, inspection, drying, labelling, and secondary packaging. Modular conveyors from KHS, AE Conveyors, and KBR enable balanced buffering and stable transfers, helping to maintain throughput at rated capacity. The setup is suitable for a wide range of beverage productions and can be adapted to various aluminium can sizes with suitable change parts and format guides. Machine Condition & Maintenance History As a used filling line, the core equipment includes a KHS Innofill Can C filler and a Ferrum FC03 seamer from 2018. The inventory list shows a complete, matched set of stations with available printed manuals, supporting commissioning, maintenance, and spare parts management. The line is presented in functional condition and is ready for operation, subject to normal site preparation and utility connections. Operational Performance & Versatility Designed for high-efficiency can handling, the line features a SKA Fabricating depalletizer for automatic feeding, a...

Kondisi: bekas, Tahun pembuatan: 2004, nomor mesin/kendaraan: LC617, Used KRONES Glass Bottling Line – 18,000 BPH Technical Specifications & Performance Data This complete glass bottling line for spirits is a high-performance, pre-owned filling line, designed around premium OEM components. With a nominal capacity of 18,000 bottles per hour, it delivers reliable output for medium- to high-volume beverage production and industrial packaging. The line processes standard spirits formats with high precision and is fully integrated from depalletizing to labeling and end-of-line packaging. Production Speed: 18,000 bottles per hour Bottle Formats: Compatible with 0.7L, 0.75L, 1.0L bottle sizes Container Types: Designed for glass bottles Key OEMs: Krones (core line), Zalkin (capping), plus Hartness, MSK, Garvens, Videojet, Langenpac, Marsh, Mapex, Gassner Main Modules and Models: Krones Sensometic Filler, Krones Variojet Rinser, Zalkin T9/360 Cappers (x3), Krones Prontomodul Labeler, Krones Linapac Autopacker, Krones Variocart C-40 Carton Erectors (x2), Krones Variocol H-120 Carton Sealer, Garvens E40-DMS Checkweighers (x2), Videojet 3330 Laser Coder (x2) Year of Manufacture (primary): 2004 core line, with labeling and coding upgrades in 2015 and 2016 Line Scope: Fully integrated from depalletizing, rinsing, filling, capping, labeling, inspection, coding, packaging, carton erecting and sealing to conveying systems Ppedeyzz Hhopfx Anwot Advanced Automation & Control Systems The line features comprehensive automation at all stations to ensure stable and synchronized operation at 18,000 bph. Zalkin’s continuous multi-head capping enables consistent closure application. In-line inspection and checkweighing provide real-time quality control with automatic rejection. Laser coding and carton printing are seamlessly integrated for traceability and compliance in beverage production. Integrated controls for coordinated machine operation and format changes In-line inspection (fill level/visual) and checkweighers with automatic rejection Laser coders for high-speed, permanent marking on glass containers End-of-line automation including autopacking, carton erecting and sealing Line Integration Capability Designed as a turnkey, used packaging system, the line offers end-to-end integration and reliable handling of glass bottles. It is suitable for spirits bottling and features format flexibility for common sizes 0.7L, 0.75L, and 1.0L. The conveying network covers container, pack, and pallet levels and supports efficient material flow as well as effective buffering. Continuous operation from depalletizer to labeler and end-of-line Format flexibility for 0.7L, 0.75L, and 1.0L Complete conveyor network for containers, cases, and pallets Compatible with additional upstream and downstream equipment as required.

Kondisi: bekas, Tahun pembuatan: 2015, Overview This complete bottling line was manufactured by KOSME in 2015 and consists of a depalletizing system, a rinser/filler/capper block, a labelling machine, and a full conveyor system. The line is designed for high-quality filling of beverages using isobaric probe valve technology and is suitable for products such as beer, carbonated drinks, kombucha, and specialty beverages. With a compact rotary layout and a capacity of up to 135 bottles per minute, the system offers an efficient and hygienic solution from depalletizing to labelling. The system is available as it has been dismantled and prepared for shipping. Delivery to the port of Rotterdam (Incoterms 2020) is possible on request. Technical Data Capacity: up to 135 bottles per minute (BPM) Bottle formats: 12 oz (installed), with change parts for 22 oz / 24 oz Fill product: beer, carbonated drinks, kombucha, functional beverages Filling system: isobaric probe filling with electronic fill level control Fill range: 12 oz – 24 oz containers Labelling system: cold glue labelling Bottle detection: integrated bottle breakage detection system Construction: full stainless steel, hygienic design Cleaning: automatic CIP capability Operation: touchscreen HMI with recipe and product management Power supply: configured for 460Y / 265 V | 3 phase | 60 Hz (US electrical supply) Note: Frequency/voltage converters required for markets outside the USA Condition: machine generally in good condition, dismantled and ready for shipment Scope of Delivery Depalletizer | KOSME / Semidepal | 2015 Rinser / Filler / Crown Capper (Monoblock) | KOSME | Barifill | 2015 Labelling Machine | KOSME | Flexa 600 (cold glue) | 2015 Bottle Conveyor | KOSME | – | included | 2015 Additional Information Manuals included Standard equipment and change parts for 12 oz and 22 oz included Additional documentation available on request All conveyor lines included Dismantling team available for supervision of reinstallation and recommissioning Utility specifications (air, CO₂ / gas) available on request Podpfeyigigex Anwjpt