Pusat pemesinan 5-sumbu

WILLEMIN MACODEL W 408 B

Kondisi: bekas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 1 MAIN SPINDLE - Max. bar diameter: 23 mm - Minimum resolution C-axis: 0.001° TURNING-MILLING SPINDLE - Travel X/Z: 250/300 mm - Travel Y: 200 mm - B-axis stroke: -15°/+100° - Minimum resolution B-axis: 0.001° - Tool type: HSK E40 - Spindle speed: 30,000 rpm - Spindle drive power: 10 kW TOOL CHANGER - Tool changer type: Parapluie - Number of tools in magazine: 24 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Machine weight: 1,700 kg EQUIPMENT - Control system: NUM 1050 - Coolant tank * Internal coolant supply (IKZ) - Oil mist extraction: Elbaron RON/A 60 - Coolant container: MARKSA CSW100 - Unit for 6th side machining - Bar feeder: Willemin - Collet chuck Codpfx Aevh I Ugeqxogw

Kondisi: baik (bekas), Tahun pembuatan: 2014, Technische Daten auf den Fotos ersichtlich. Teile, die von Hand gezeigt werden, sind nicht im Lieferumfang enthalten. Csdpfoufp Svsx Aqxsgw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel Paths: X axis: 250 mm Y axis: 200 mm Z axis: 300 mm Rapid Traverse: X, Y, Z: 30 m/min Feed Force: X, Y, Z: 3,700 N Resolution: X, Y, Z: 0.0001 mm Rotational Movement of the Motor Spindle – B Axis Rotational Range: -15 – 100° Rotational Range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Max. Speed: 20 rpm Drive Torque: 750 Nm Hydraulic Clamping: 50 bar Holding Torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100%: 10 kW Power at 25%: 15 kW Rated Torque: 100%: 8 Nm 25%: 12 Nm Speed Range: 50 – 30,000 rpm A Axis (Bar Capacity Ø 40 mm) Spindle Type: A4 Max. Bar Diameter: 40 mm Max. Speed: 35 rpm Drive Torque: Nominal: 112 Nm Max: 238 Nm Resolution: 0.0001° Axis Clamping (A Axis): Pressure: 70 bar Holding Torque: 130 Nm Tool Changer Number of Tool Disks: 2 Positions per Disk: 24 Max. Tool Weight: 1 kg Rotation Speed: 60 rpm Max. Tool Diameter (adjacent positions occupied): 50 mm Max. Tool Diameter (adjacent positions free): 63 mm Max. Tool Length (from spindle nose): 95 mm Secondary Slide Travel Path: 80 mm Feed Force: 1,700 N Tilting Moment: 90 Nm Resolution: 0.0001° Hydraulic Pressure for Tilting: 100 bar Workpiece Manipulator Pneumatic Vertical Slide Gate: Ø: 25 mm Stroke: 710 mm Linear Stroke per Motor Revolution: 70.4 mm/rev Csdpfxswv Hnmo Aqxogw Max. Transfer Speed: 60 m/min Max. Workpiece Weight: 5 kg Max. Manipulator Stroke: 1,120 mm (2×560 mm) Max. Vertical Stroke: 150 mm Part Intake Ø / Length: Ø 32 mm / 100 mm Part Ejection Ø / Length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip Force: 45 N (at 6 bar) Max. Gripper Opening: 14 mm (2×7 mm) Pneumatic Equipment Operating Pressure: 6 bar Hydraulic System Operating Pressure: 95 – 105 bar Coolant System Coolant Tank Volume: 80 liters Chip Tray Volume: 30 liters Kinematic Viscosity in Operation: 10 – 15 cST SCOPE OF SUPPLY Including, but not limited to: - Willemin Macodel W 408 B Machining Center - Extraction unit - Fire extinguishing system - Probe - Coolant system - Oil cooler - Data backup - Complete operating documentation - Exact scope of supply as per photo series No guarantee is given for the accuracy, completeness and timeliness of the information provided.

Kondisi: bekas, Tahun pembuatan: 2006, Complete bore diameter / mm Bore depth / mm Number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces For sale is a specialized machine package – two perfectly coordinated systems for the complete machining of long, heavy workpieces with the highest standards of precision and efficiency. MACHINE 1 Froriep CNC Deep Hole Drilling Machine – The Prefabrication Specialist Year of manufacture: 2006 Control: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Chuck clamping diameter: 900 mm Weight: approx. 47,000 kg Ideal for precise pilot drilling of deep holes – including faceplate and steady rest MACHINE 2 Irle Machine – High-Precision Finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed rate: 3 – 4,500 mm/min (stepped) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Steady rest clamping range: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tons Cgjdpfx Ajuddimsqxow Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for precision boring, honing, and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pilot drilling to final machining - Large workpieces up to 11 meters and 10 tons - High process reliability through perfect machine synchronization - Immediately available, well-maintained, and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics, and large component manufacturing

Kondisi: bekas, Tahun pembuatan: 1965, Maximum core drilling diameter: 50 mm Drilling depth: 2,000 mm Swing diameter: mm Maximum drilling diameter: 110 mm Total power requirement: 30 kW Machine weight: approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling diameter: - Solid drilling approx. 2 - 50 mm - Boring approx. 100 mm Maximum drilling depth: 1,600 / optionally up to 2,000 mm (see stroke/installation length) Cgsdpfxot Hwuce Aqxew Stroke of drilling carriage: approx. 4,000 mm Distance between the two spindle heads: 5,000 mm Centre height above guideway: 350/450 mm Drilling feed of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt drive: 260 - 650 / 650 - 1,625 rpm Work spindle drive: 24 kW Coolant pump drives: 1 x 7.5/15 kW, 1 x 15/28 kW Total drive approx. 60 kW, 380 V - 50 Hz Total machine/guideway length: 7,500 / 5,000 mm Total weight: approx. 10,000 kg Accessories / Special configuration: - The machine consists of the following elements: The main spindle on the left, followed by a BOZA, a table unit powered by a ball screw, BOZA with increased centre height, and at the end, a spindle head of the B 16 series with drive motor approx. 7.5 kW, n = 900/2,400 and 2,400/6,000 rpm; very large and complex coolant system with filter unit, extensive accessories and drilling tools up to 100 mm Ø - Suitable for rotating workpieces/fixed drilling tools (ELB and BTA methods), as well as for stationary workpieces and rotating drilling tools. It can operate with internal oil supply (ELB) or external oil supply (BTA). - Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate: 17/40/120 or 220/500 litres/min, tank capacity approx. 2,500 litres - Feed of the main carriage via ball screw and infinitely variable DC motor. The main carriage currently holds a cross-adjustable table (approx. 500 mm adjustment, table size approx. 800 x 800 mm) for accommodating cubic and cylindrical workpieces. Electrically controlled via a cam track (approx. 2,500 mm) and limit switches for rapid traverse, feed, and return. - 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck, approx. 315 mm Ø - Modernised control panel with speed display, feed adjustment and display, kW display, feed/rapid traverse switching (left/right), etc. - 2 separate switch cabinets, separate BoZa, sleeves, reducers, clamping aids, and much more. Condition: Good – demonstration ready shortly. Due to the accessories, the machine is very valuable. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further deep hole drilling machines always in stock – please enquire.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 30214501, panjang pembubutan: 2.000 mm, panjang total: 12.000 mm, WFL Millturn M60-G/2000 WORKING RANGE Centre distance mm 2000 Swing diameter over saddle mm 480 MAIN DRIVE AC drive with 2-stage gearbox Drive power 100% duty cycle kW 60 Max. spindle speed rpm 2600 Max. spindle torque 100% duty cycle Nm 2748 COUNTER SPINDLE DRIVE AC drive with 2-stage gearbox Drive power 100% duty cycle kW 40 Max. spindle speed rpm 3300 Cgedpfx Aou Hl R Toqxjw Max. spindle torque 100% duty cycle Nm 1830 TOOL CARRIER (Single tool carrier, turning-milling-drilling unit) AC drive, drive power 100% duty cycle kW 25 Max. spindle speed rpm 4000 Max. spindle torque 100% duty cycle Nm 300 Travel perpendicular to X/Z plane (Y-axis) mm 300 [-125/+175] Swivel angle of milling spindle (B-axis) ° -110/+90 Spindle interface for tools as per DIN 69893 HSK-A63 Spindle diameter at front bearing mm 100 DIMENSIONS Length (max., with tool magazine and chip conveyor) m 11*12 Width/Height m 4.2/3.5

Kondisi: baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 760 mm, diameter pembubutan: 376 mm, kecepatan spindel (maks.): 3.500 rpm, diameter quill: 78 mm, berat keseluruhan: 6.000 kg, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Parameter utama: Kontrol: FANUC 0iD/31iA Chuck: SAMCHULLY 10" Lubang spindle: 86 mm Dengan pipa pelindung: 78 mm Kepala revolver: 12 posisi utama, 12 posisi sekunder, koneksi BMT65, Tailstock hidrolik terprogram: MT5 Daya spindle utama: 22 kW S1max=3500 rpm Daya alat putar: 5,5 kW S2max=5000 rpm Rentang gerak sumbu X: 260 mm Cgedpfxsykikxj Aqxjw Rentang gerak sumbu Z: 830 mm Rentang gerak sumbu Y: + -52 mm (104 mm) Sumbu C Panjang pembubutan maksimum: L=760 mm Diameter pembubutan terbesar: D=376 mm Kecepatan gerak cepat: 30 m/menit Pengukuran alat otomatis dengan lengan probe Berat: 6000 kg

Kondisi: bekas, Tahun pembuatan: 2007, Detail teknis: Diameter putar: 220 mm Panjang putar: 310 mm Cgedox Aq Hwopfx Aqxjw Kebutuhan daya total: 17 kW Berat mesin sekitar: 3,3 t Kebutuhan ruang sekitar: 2,25 x 1,63 x 1,94 m Diameter putar di atas alas: 430 mm Diameter lubang tengah: 45 mm Jarak antara senter: 687 mm Lintasan geser radial (Sumbu X): 160 mm Lintasan geser aksial (Sumbu Z): 310 mm Kecepatan putar spindle: 0–6.300 rpm

Kondisi: baru, jarak pergerakan sumbu X: 850 mm, jarak lintasan sumbu Y: 820 mm, jarak gerak sumbu Z: 610 mm, tinggi benda kerja (maks.): 450 mm, berat benda kerja (maks.): 500 kg, jumlah slot dalam magazin alat: 60, produsen pengendali: HEIDENHAIN, berat keseluruhan: 14.000 kg, model controller: TNC 7, pasokan pendingin: 40 batang, daya motor spindle: 32 W, pergerakan cepat sumbu Z: 48.000 m/menit, gerak cepat sumbu X: 48.000 m/menit, pergeseran cepat sumbu Y: 48.000 m/menit, diameter meja putar: 630 mm, kecepatan rotasi (maks.): 12.000 rpm, hidung spindel: SK 40 BIG PLUS (BVD 40), diameter alat: 150 mm, panjang alat: 300 mm, berat alat: 8 g, diameter benda kerja (maks.): 750 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, LAGUN EVZ 630 – Pusat Pemesinan 5-Sumbu Simultan LAGUN EVZ 630 baru, pusat pemesinan 5-sumbu simultan untuk presisi dan dinamika tertinggi dalam pemesinan modern. Mesin ini unggul berkat konstruksi yang kokoh, stabilitas termal tinggi, serta teknologi kontrol dan penggerak HEIDENHAIN terbaru. Ideal untuk konstruksi alat dan cetakan, rekayasa mesin, serta produksi subkontrak berkualitas tinggi. Keunggulan Anda secara singkat: ✔ Instalasi & pengoperasian di Jerman sudah termasuk ✔ Layanan & suku cadang langsung melalui JMT ✔ Pembiayaan / leasing tersedia ✔ Desain ringkas dengan stabilitas tinggi ✔ Garansi 24 bulan Mengapa memilih LAGUN: Codpfx Aqop Nnutjxegw LAGUN adalah salah satu produsen mesin perkakas terkemuka di Spanyol (MAHER HOLDING) dan dikenal atas konstruksi yang kokoh, dinamika tinggi, dan konsep mesin yang tahan lama. Pusat pemesinan LAGUN diakui atas keandalan, kemudahan perawatan, dan biaya operasional yang rendah. Spesifikasi teknis: Sistem kontrol: HEIDENHAIN TNC 7 CNC control Layar TFT HEIDENHAIN 21" Motor, pengukur, dan handwheel elektronik HR 510 dari HEIDENHAIN Pembuangan serbuk: Konveyor serbuk Penutup: Penutup penuh dengan pintu otomatis untuk akses ruang kerja yang nyaman dan ergonomis Akurasi: Akurasi posisi: ± 0,005 mm Akurasi pengulangan: ± 0,003 mm Keunggulan Anda sebagai pelanggan JMT: ✔ Mitra distribusi resmi LAGUN di Jerman ✔ Dukungan teknis dan layanan di tempat ✔ Pasokan suku cadang cepat ✔ Pelatihan dan instruksi sudah termasuk Hubungi kami – kami siap memberi Anda konsultasi dan menawarkan penawaran khusus sesuai kebutuhan Anda.

Kondisi: sangat baik (bekas), jarak pergerakan sumbu X: 10.000 mm, jarak lintasan sumbu Y: 2.100 mm, jarak gerak sumbu Z: 1.300 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 36 rpm, rentang pivot: 360 °, SHW PowerSpeed 5 Travels • X-axis (bed): 10,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (spindle stock horizontal): 1,300 mm Control • CNC Control: Heidenhain iTNC 530 Feed Rate • X, Y and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal Milling Head, Orthogonal Design • Milling head holder swivel range: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Spindle speed range: 36 – 4,000 rpm o Temporarily 36 – 6,000 rpm Automatic Tool Changer Cgsdpsxgq Ayefx Aqxsw • Tool magazine for 48 tools Coolant System • Tank capacity: 500 l About the Company MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts supply, on-site customer support, machine overhauls, as well as control retrofits. Services: - Used machinery - Spare parts - Customer service - Machine servicing - Machine overhauls - Control retrofitting ----- _____ Used machine – used milling machine – used travelling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used fraesmaschine – used CNC milling machine – used drill milling machine – used metal milling machine – used metal mill – used metal milling machine – used CNC mill – CNC fraesmaschinen – CNC milling machines – milling machine – large part machining – CNC large part machining – milling – SHW – PS5 – PS 5 – Powerspeed – SHW PSZ 5 – SHW Powerspeed – SHW Powerspeed 5 – PSZ 5 – Heidenhain – MBM milling machine – MBM machine – column milling machine