Pusat pembubutan/penggilingan

WILLEMIN MACODEL W 408B

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel Paths: X axis: 250 mm Y axis: 200 mm Z axis: 300 mm Rapid Traverse: X, Y, Z: 30 m/min Feed Force: X, Y, Z: 3,700 N Resolution: X, Y, Z: 0.0001 mm Rotational Movement of the Motor Spindle – B Axis Rotational Range: -15 – 100° Rotational Range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Max. Speed: 20 rpm Drive Torque: 750 Nm Hydraulic Clamping: 50 bar Holding Torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100%: 10 kW Power at 25%: 15 kW Rated Torque: 100%: 8 Nm 25%: 12 Nm Speed Range: 50 – 30,000 rpm A Axis (Bar Capacity Ø 40 mm) Spindle Type: A4 Max. Bar Diameter: 40 mm Max. Speed: 35 rpm Drive Torque: Nominal: 112 Nm Max: 238 Nm Resolution: 0.0001° Axis Clamping (A Axis): Pressure: 70 bar Holding Torque: 130 Nm Tool Changer Number of Tool Disks: 2 Positions per Disk: 24 Max. Tool Weight: 1 kg Rotation Speed: 60 rpm Max. Tool Diameter (adjacent positions occupied): 50 mm Max. Tool Diameter (adjacent positions free): 63 mm Max. Tool Length (from spindle nose): 95 mm Secondary Slide Psdpfx Anewv Hnms Ijgr Travel Path: 80 mm Feed Force: 1,700 N Tilting Moment: 90 Nm Resolution: 0.0001° Hydraulic Pressure for Tilting: 100 bar Workpiece Manipulator Pneumatic Vertical Slide Gate: Ø: 25 mm Stroke: 710 mm Linear Stroke per Motor Revolution: 70.4 mm/rev Max. Transfer Speed: 60 m/min Max. Workpiece Weight: 5 kg Max. Manipulator Stroke: 1,120 mm (2×560 mm) Max. Vertical Stroke: 150 mm Part Intake Ø / Length: Ø 32 mm / 100 mm Part Ejection Ø / Length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip Force: 45 N (at 6 bar) Max. Gripper Opening: 14 mm (2×7 mm) Pneumatic Equipment Operating Pressure: 6 bar Hydraulic System Operating Pressure: 95 – 105 bar Coolant System Coolant Tank Volume: 80 liters Chip Tray Volume: 30 liters Kinematic Viscosity in Operation: 10 – 15 cST SCOPE OF SUPPLY Including, but not limited to: - Willemin Macodel W 408 B Machining Center - Extraction unit - Fire extinguishing system - Probe - Coolant system - Oil cooler - Data backup - Complete operating documentation - Exact scope of supply as per photo series No guarantee is given for the accuracy, completeness and timeliness of the information provided.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, kecepatan spindel (maks.): 8.000 rpm, jumlah sumbu: 9, This 9-axis TRAUB TNL 32 Swiss-type lathe was manufactured in 2014. It features a TX8i-s control system with a 64-bit RISC CNC/PLC processor, a TFT color display, and an electronic handwheel. The main spindle supports a 32 mm bar capacity, and the machine is equipped with a counter spindle featuring a C-axis. It comes with an upper tool turret with dual drive and a lower turret with nine tool holders. Consider the option of purchasing this TRAUB TNL 32 Swiss-type lathe. Contact us for further information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber optic PC; color TFT flat screen; electronic handwheel • Included software/extensions: Polyform (C-axis programming), Helical (3D Y-axis interpolation), Thread cutting without compensating chuck, Cut-off tool breakage monitoring, Cut-off part ejection monitoring, Axis disable, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bar/bore; C-axis, max. speed 8,000 rpm • Max. stroke: 305 mm (L version) / 127 mm (K version) • Counter spindle: Partial hollow clamping, C-axis; cleaning unit mounted on the lower turret • Upper tool turret: X/Y/Z/H/B-axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H-axes; 9 tool holders; combined drive; independent counter spindle operation • Measuring/feedback: Linear glass scales on the X-axis (upper and lower turret); rotary encoders on C-axis Pjdpsx D Drcofx An Iogr • Backworking: 8-position backworking table with combined drive for up to 3 tools; prepared for internal coolant supply • Clamping: Clamping direction reversal mechanism and counter clamping pressure device on main and counter spindle • Coolant system: Standard system with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), 19 l/min flow rate • Extraction: D 150 mm port for central extraction system Additional equipment • None indicated (no robot, bar loader, chip conveyor, or external automation listed)

Kondisi: bekas, WILLEMIN_MACODEL_W_408_B Psdpfsyxp Dcox An Iogr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Pengontrol Brother C-00 Jangkauan pergerakan X/Y/Z: 650 x 400 x 435 mm Podszlb Ecopfx An Iegr Pengganti palet ganda 800 x 400 mm Kecepatan spindel: 16.000 putaran/menit Majalah perkakas untuk 40 perkakas, BT 30 Sistem pendingin internal 70 bar Probe pengukuran 3D OMP 40 Roda tangan elektronik Konveyor serpihan

Kondisi: baru, Tahun pembuatan: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Pjdji Ar Ruopfx An Iegr Effective working area: 1520x3050 mm Max. positioning speed: 120 m/min Max. acceleration: 1.5 m/s² Positioning accuracy: 0.02 mm/m Repeatability: 0.03 mm/m Max. table load: 1,500 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jarak pergerakan sumbu X: 495 mm, jarak gerak sumbu Z: 780 mm, daya motor spindle: 37.000 W, kecepatan spindel (maks.): 2.000 rpm, tinggi total: 3.636 mm, lebar total: 2.860 mm, produsen pengendali: FANUC, model controller: 0i-F Plus iHMI-Touch, panjang produk (maks.): 2.005 mm, jumlah sumbu: 3, Mesin bubut vertikal 3 sumbu tipe DN SOLUTIONS PUMA V8300MR ini diproduksi pada tahun 2023. Kondisi seperti baru, bekas pajangan. Mesin ini memiliki diameter bubut maksimum 830 mm dan panjang bubut 690 mm. Mesin ini dilengkapi dengan spindel berkinerja tinggi yang menghasilkan torsi 2.592 Nm dan kecepatan cepat 20 m/menit. Jika Anda mencari kemampuan bubut berkualitas tinggi, pertimbangkan DN SOLUTIONS PUMA V8300MR yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut. • Kondisi: Barang pajangan, seperti baru • Ukuran chuck (spindel utama): hingga 15" (380 mm) (tidak termasuk dalam cakupan pengiriman) • Lubang batang: 60 mm • Kecepatan cepat (X/Z): 20 / 20 m/menit • Torsi spindel: 2.592 Nm • Diameter bubut maks.: 830 mm • Panjang bubut maks.: 690 mm • Stasiun alat: 12 • Pemegang alat: BMT 75P • Jenis panduan: Panduan kotak • Ukuran monitor: 19" • Fitur utama: • Pusat bubut vertikal yang kuat dan sangat ringkas • Spindel vertikal; pemuatan optimal dengan derek dan aksesibilitas yang baik untuk operator • Rangka cor yang sangat kaku • Spindel utama dengan torsi tinggi • Desain mesin yang ringkas • Alat yang digerakkan secara opsional dengan torsi tinggi (tersedia) • Panduan kotak yang berkualitas tinggi dan kokoh • Kecepatan cepat hingga 20 m/menit Pgedpjyrr Rwofx An Isr Peralatan tambahan • Pompa pendingin, 10 bar • Pemisah oli • Lampu peringatan 3 warna • Opsional: Konveyor serpihan (konveyor sabuk engsel). Harga berdasarkan permintaan • Mesin akan dikirimkan dengan paket dasar standar: Revolver dilengkapi sepenuhnya, termasuk dudukan dasar. Spesifikasi Teknis Alat yang Digerakkan: Tidak

Kondisi: baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 2.200 kg, KUKA KRC4 Linear Axis 1500/3T Item number: 8143983 Serial number: 143983 Psdpfx Aovzxg Tsn Iegr The KUKA KRC4 linear axis is a high-precision and robust motion unit, ideally suited for industrial applications. It ensures precise control of movement sequences and plays a central role in automation processes as well as robotic systems within manufacturing. Its sturdy construction guarantees consistently reliable performance, even in the most demanding environments.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, EMCO MAX TURN 45 termasuk LM 1200. Termasuk konveyor serbuk (chip conveyor). Gambar tambahan menyusul. Pedozhl Nwopfx An Ijgr

Kondisi: bekas, Tahun pembuatan: 2017, jam operasional: 45.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 17L5M0045, panjang pembubutan: 490 mm, diameter pembubutan: 395 mm, lubang spindel: 61 mm, jarak pergerakan sumbu X: 235 mm, jarak lintasan sumbu Y: 580 mm, jarak gerak sumbu Z: 105 mm, gerak cepat sumbu X: 24 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 10 m/menit, kecepatan rotasi (maks.): 6.000 rpm, tinggi total: 2.085 mm, panjang total: 2.790 mm, lebar total: 1.752 mm, berat keseluruhan: 4.150 kg, Mesin bubut terutama digunakan untuk pembuatan spacer, bushing jarak, dan berbagai pengikat lain dari baja tahan karat. Mesin ini selalu dioperasikan oleh profesional dan dirawat secara profesional. Pjdpfx Aoxylzdjn Ijgr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 4.500 rpm, kecepatan spindel (min.): 50 rpm, For sale is a machining center of the brand Deckel Maho, model DMU 50 M, equipped with CNC control and manual rotary axes. Pgjdsu Unh Iopfx An Ijr The machine is in very good condition, fully functional, and immediately ready for operation. A special feature is the option to operate it in an open enclosure. Technical specifications: Year of manufacture: 2002 Control: Heidenhain TNC 124 X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Feed rate: 5,000 mm/min Rapid traverse: 5 m/min Tool holder: SK 40 Clamping surface: Ø 700 x 500 mm Rotary range: 360° (mechanical) Swivel range: +90/-15° (mechanical) Max. load: 200 kg Required space: 4,000 x 3,500 x 2,518 mm Transport dimensions: approx. 2,500 x 1,520 x 2,200 mm Weight: 2,600 kg Additional tool holders available on request. Transport and loading can be arranged at extra cost, Europe-wide. Prices are subject to VAT. Inspection by appointment is possible. Contact us — our team is happy to assist you. Trade-in or exchange possible! Machine purchase and sales BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.