Profiler ujung ganda

WINTER INDUSTRY SERIES 8030H

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, Longitudinal parquet profiling machine Ndjdpfx Aevxz Syob Ejd 4+4 motors Minimum working width: 80 mm Tongue and groove profile

Kondisi: bekas, Number of spindles: 6 units Working width: 240 mm Planing height: 200 mm Planer table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Dimensions (L x W x H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window production ----- Machine has been cleaned and function-tested! Technical data: ----- Working width: max. 240 mm Working height: max. 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd tool holder HSK ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning 3rd tool holder HSK ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setup 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setup 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Electronic tool diameter setup 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Electronic vertical and horizontal positioning Additional technical features: ----- 2 feed units after the upper spindles for reducing the axle distance from 620 mm to 450 mm Air-cushion lubrication system in the work table Ndodsvnv Uzepfx Ab Ejd 2 x milling units with belt drive and quick-change HSK 85 system in positions 2 and 3 Working height increased to 200 mm instead of 120 mm 5 x electronic horizontal positioning (positions 2–3–4–5–6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning (positions 2–3–5–6) 3 x electronic tool diameter setup (positions 3–4–5) Mobile 10 control PRL equipment for cutting out the glazing bead on the 2nd upper horizontal spindle Machine is supplied without tooling (All technical data as per manufacturer – no guarantee!)

Kondisi: baru, Tahun pembuatan: 2024, Lebar kerja: 380 mm Tinggi kerja: 150 mm 1. Unit, grup rotor: Grup berisi 5 sikat rotor osilasi, Ø 115 mm, masing-masing dengan motor 3 kW 2. Unit, sikat: Scotch Brite Hard / diameter 210 mm, penggerak variabel Ndjdpfetnf Rrsx Ab Ejd Penyesuaian tinggi: roda tangan Indikator tinggi: penghitung mekanis Kecepatan umpan: 4 - 12 m/menit Daya motor umpan: 0,37 kW Karpet vakum: ya Panjang mesin: 1400 mm Lebar mesin: 900 mm Berat: 500 kg

Kondisi: baik (bekas), Four-side planer Weinig Unimat 23 Lamella machine 9 spindles, grooved bed Working width: 230 mm Working height: 170 mm Spindle diameter: 40 mm Feed: 5.5 kW / 6–36 m/min Spindle arrangement: 1–Bottom (5.5 kW) 2–Right (5.5 kW) 3–Left (5.5 kW) 4–Right (5.5 kW) 5–Top (11 kW) 6–Bottom (5.5 kW) 7–Top (7.5 kW) 8–Bottom (37 kW) 9–Universal (11 kW) 5 powered rollers in the table Nodpfxspq T Rbo Ab Eodd

Kondisi: baru, Tahun pembuatan: 2024, Crosscut saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Working table inclined by 8° Technical features of the cutting unit: Pneumatic upstroke saw TR500 Motor power 10 HP (7.5 kW), 400V/50Hz TCT blade diameter 500 mm, bore 30 mm, Z=144, S=4.6 Cutting cycle speed: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE FOR LEFT AND RIGHT SIDE Feed via rack-and-pinion system and brushless motor Nedpfxjhw Ng Is Ab Esdd Positioning accuracy +/- 0.4 mm Powerful feed motor for bundle weight of up to 80 kg Maximum feed system speed 90 m/min Pneumatic pusher lift-up at end of cutting cycle and overhead return Data input management: 12” TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Loading and saving of machine parameters via USB port Editing and direct input of cutting cycles (patterns) at controller Transferring cutting lists created on PC via USB or Ethernet port Operating software: Manual entry of load board length Partial optimization without board length reading Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1,000 cutting lists with 11 dimensions or one list with 10,000 consecutive dimensions "OPTI" package: automatic board length detection and full optimization. Piece length reading via photocell Cutting cycle with 6 optimization criteria (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: total optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: “OPTI PLUS” package: for removal of knots and defects Photocell for reading knots and defects during wood mapping Marking with fluorescent chalks/crayons (Note: can only be ordered in combination with ZA250) Pneumatic side clamping device

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 600 mm, OPTIMIZATION MITRE SAW LINE WITH ROTATABLE SAW UNIT CT600 / 6000 max. raw part length 6,000 mm Cutting dimensions, aggregate position A At 0°: 200x215, 50x370 mm At 30°: 200x185 mm, 50x325 mm At 45°: 200x150 mm, 50x265 mm At 80°: 200x35 mm, 50x63 mm Cutting dimensions, aggregate position B At 0°: 160x315, 40x400 mm At 30°: 160x270 mm, 40x350 mm At 45°: 160x220 mm, 40x285 mm At 80°: 160x52 mm, 40x70 mm Min. workpiece thickness: 10 mm (20 mm with automatic feed) Ndsdpfjv Aub Njx Ab Esd Support table inclined 8° Pusher stop side: right Technical data – saw unit: Complete unit including table rotatable Motor 7.5 kW, 400 Volt, 50 Hz Carbide-tipped saw blade diameter 600 mm, bore 30 mm, 60 teeth, thickness 5 mm Cutting cycle time approx. 4 sec. Automatic rotation of the unit -70° to +70° Saw unit rotation -80° to +80° on request Aggregate rotation from 0° to 70° in approx. 1.3 sec. Positioning accuracy +/- 0.2° Clamping system consisting of 2 pneumatic pressure cylinders with mounted pressure bar Side pressure plate system with electronic control Technical data – pusher system: Feed via pinion/rack system with brushless motor Positioning accuracy +/- 0.4 mm Feed motor power suitable for pushing a package weight of up to 80 kg Max. feed speed 90 m/min Pneumatic pusher lift after end of cutting cycle and return at feed level Control: 12 inch touchscreen BECKHOFF professional PC with Windows operating system USB port Ethernet port Upload/download of machine data via USB Editing of cutting program directly at control unit Transfer of cutting lists via USB or Ethernet Direct import of .btl (10.4) format files Operating software: Up to 1000 cutting lists with up to 11 different cutting dimensions each, or 1 list with 10,000 different cutting dimensions in sequence Cutting cycle with 4 optimization options (max. length, min. waste, sequence, length priority) Graphical display of workpiece Installed additional options: ZA110 Outfeed table (per meter) ZA040 Saw unit table rotation 80°

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Unit Kontrol Merek: HAAS Model: tidak ada Penggerak Utama Ndjdpfx Absxd H Umo Ejd Taper alat: BT40 Jumlah sumbu: 4 Pergerakan Gerak Sumbu-X: 1250 mm Gerak Sumbu-Y: 508 mm Gerak Sumbu-Z: 635 mm Mesin HAAS VF-4SS 4 sumbu ini diproduksi pada tahun 2018, dengan area kerja 1250 × 508 × 635 mm dan kecepatan spindle 12.000 rpm. Dilengkapi dengan majalah alat 24 + 1 dan taper BT40. Jika Anda mencari kemampuan milling berkualitas tinggi, pertimbangkan mesin HAAS VF-4SS yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Milling

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Nagelneue Friulmac EQ 004 2.5 mit Zufuhrband und Aufgabe-Trichter Touchscreen-Bedienung und automatische Verstellung Bearbeitungslänge: min. 190 mm – max. 2.500 mm Bearbeitungsbreite: min. 30 mm – max. 250 mm Materialstärke: min. 12 mm – max. 35 mm Vorschubgeschwindigkeit: 6 – 25 m/min 2 x 2 Hobelaggregat: 3 kW – 720 U/min Hauptprofilieraggregat: 4 kW – 7.200 U/min Ndsdpfx Abjvupm De Eod Für weitere Informationen kann ich Ihnen die Originaldokumentation zusenden.

Kondisi: sangat baik (bekas), Four-Side Planer Weinig Unimat 500 Working width: 230 mm Working height: 140 mm Number of spindles: 6 Spindle configuration: 1. Bottom 7.5 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 11 kW 5. Top 11 kW 6. Bottom 7.5 kW Total power: 56 kW Feed speed adjustable via inverter Memory system Pneumatic pressure rollers divided into 3 sections Nodpfx Abethk T Is Eodd 4 rows of steel infeed rollers 2 rows of rubber outfeed rollers 1 table roller driven by cardan shaft Infeed table length: 1980 mm Work tables manufactured with Marathon Coating technology CE certificate Extraction ports: 6 x 140 mm Machine dimensions: 394 x 185 x 195 cm (H)

Kondisi: bekas, Weinig Profimat 22 A 4 left mobile unit with measuring sensor, enabling automatic adjustment based on the width of the workpieces being processed. Ndodpfx Aboryb D So Eed Dimensions and weight: 330 x 145 x H160 cm. Weight: 1,400 kg (on pallet).