Trailer tugas berat

WMT A40/9,0 x 3,0

Kondisi: baru, Length 2000 mm Width 700 mm Working height 900 mm Required space approx. 2.0 x 0.7 x 0.9 m Workbench - Made in Germany Industrial quality, extremely robust and durable design for the highest demands! Nodpfx Aogvqznsahsdf Workbench top: 45 mm thick, premium multiplex beech Drawers: 3 units on the left Right: 1 drawer with 1 large compartment Center: open compartment Paint finish: RAL 5010 blue, RAL 6011 green, RAL 7016 anthracite grey

Kondisi: baru, Payload capacity 15,000 kg Length 10,000 mm Width 2,450 mm Height 625 mm Rear axle: steerable Front axle: steerable Tire size 425 x 260 mm Machine weight approx. 2.9 t Nsdpfsfrzvljx Aahjdf Required space approx. 11.7 x 2.5 x 0.625 m Heavy-duty trailer equipped with: - Twin turntable steering - Small turning radius - Tip-proof due to steering angle limiter - Robust construction, low maintenance - Removable drawbar, length 1,320 mm - Impregnated wooden platform - Standard paint finish may vary. Custom RAL colors available upon request. Different payloads and dimensions required? Please contact us.

Kondisi: sangat baik (bekas), Focker Strähler Welding Positioner, 8 Tonnes - Load capacity: 8,000 kg - Equipped with hand and foot remote control - Infinitely variable speed and tilt adjustment - Speed range: 0.02 rpm to 1.1 rpm - Table diameter: 1,500 mm - Height (tilted, center): 1,170 mm - Height (horizontal): 1,400 mm Nedpfx Asf Ezdnoahedf - Length: 2,400 mm - Width: 1,500 mm Condition: Visually and technically excellent, runs very quietly

Tahun pembuatan: 2022, Kondisi: baru, G.R.S. 5 Cable Stripping Machine This is the second machine from G.R.S. that is freestanding and does not require a sub-table. Compared to the G.R.S. 4, it is more than twice as heavy, approximately 30% more powerful, and requires 380V operation. Technical data: GRS 5: 10mm - 90mm Dimensions (W/H/D): 78 cm / 120 cm / 84 cm Weight: approx. 220 kg Stripping speed: 30 m / minute Njdpfx Ajhpcprjahedf Motor: 380V / 3000W Suitable for stripping cables with a cross-section of 10 – 90 mm and insulation thickness up to 20 mm.

Kondisi: baru, Load capacity 40,000 kg Length 8,000 mm Width 3,000 mm Height 900 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 540 / 300 dual mm Dimensions (L x W x H): 9.9 x 3.0 x 0.9 m Nodpjfrzwfofx Aahodf Heavy-duty trailer featuring - Double steering - Small turning radius - Tip-proof due to steering angle limiter - Extremely robust, resulting in minimal maintenance requirements - Tow bar can be repositioned - Impregnated wooden platform - Standard paint changes. Available in your desired RAL colour on request. Photos show a 30t version. Looking for different load capacities or dimensions? Please contact us.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0684, berat muatan maksimum: 40.000 kg, panjang ruang muatan: 4.000 mm, lebar ruang muat: 2.200 mm, tinggi ruang muatan: 780 mm, ukuran ban: 405x260, Tahun pembuatan: 2025, Gerobak Transport TPW 40 AL-PA-AW Tipe: TPW 40 AL-PA-AW Nomor Seri: 0684 Tahun Pembuatan: 2025 Daya angkut: 40.000 kg pada 60% luas area muat, kecepatan maksimum 6 km/jam Dimensi: Panjang area muat: 4000 mm Ndodpfx Aofxgxnoahsf Lebar: 2200 mm Tinggi: sekitar 760 mm Sistem kemudi: Kemudi semua roda, poros ayun & pendulum Ban: 16 roda heavy-duty 405-260 Tongkat penarik: Panjang tongkat penarik 1800 mm dengan pengaman jatuh dan mata pengait sesuai DIN untuk baut 40 mm Pelapisan: RAL 2000 Lantai transport: Kayu Douglasia–Larix 50 mm tertanam dan dikencangkan di rangka #TransportasiBebanBerat #SistemTransportInternal #TrailerBebanBerat 6-100Ton #TrailerBebanBerat 3-100Ton #GerobakPlatformTransportBebanBerat #PlatformTrailerBebanBerat #KemudiSemuaRoda #GerobakTransport

Kondisi: bekas, nomor mesin/kendaraan: YV2RT60FXKA84xxxx, jarak tempuh: 5.874 km, Tahun pembuatan: 2021, Please contact ATS Norway for more information. Please quote the reference number when making an inquiry: 20511 Specifications: - Model year: 2021 - 5,874 km (subject to minor increase) - EU approval valid until: 21.02.26 - Euro 6 engine - 8x2 wheel configuration - 551 hp - Suspension on axles 1 and 2: steel - Suspension on axles 3 and 4: air - 2 x 110 liter variable displacement pumps - 2 x manual extensions for main boom and 2 x for jib - Optical remote control by Scanreco (top model) - Load cell for main boom - Additional functions for both main boom and jib - Automatic leveling (The truck will automatically level itself and be ready for lifting.) - Virtual space (Ability to restrict all axles at the touch of a button, without needing to visit a workshop. This is ideal for working under high voltage, etc.) - SKF centralized lubrication ring and up to the first link - Additional function up to the very top of the boom Nedswphixopfx Aahsdf - Single winch hook (jib / main boom) - 2 snatch block hooks (boom / main boom) - 4-point winch hook (main boom) - Hook for jib - Hook for main boom (large hook) - Lower the generator (24 Volts) - Cable anchoring sensor and sleeve - 4-ton winch - Diagnostic cable for online remote support - Danfoss control valve block - 2 x 2 ton counterweights (These are only used for cranes over the cab; otherwise, counterweights are not required and can be removed if needed) - Front outrigger leg Superstructure: - 4 x work spotlights, strategically located in each outrigger compartment - 50" LED work light on the rear of cabin - High-performance LED lights on crane - VBG mounting with air-powered servo control unit mounted on the left side of the rear locker - Roof rack - 2 LED high beam bars at the front of the roof (daylight quality!) - Orange work warning LED beacon on the roof - EasyUp folding ladder with side railing - Chain storage boxes mounted on rear outriggers, allowing for extension together with the outriggers and secure storage during transit - Charger for cabin controls - Plastic inner fenders on axles 3 and 4 - Triangular pull-out locker between axles 3 and 4 - On the left side between axles 2 and 3: large locker with 500 W fan heater, ideal for drying work clothes, etc. - Flat/low-profile closed rear with alloy door panels, custom cut to fit the truck perfectly, with rounded edges for a very professional appearance - CNC-machined panels on the rear of the cab - Sides, cab, and rear fully painted - Crane rest cradle for operating without boom - 5 outrigger pads, 4 pieces 80x80x6 cm, stored in designated compartments at the rear platform - Large locker on right side, 1.2 x 1 meter - Powerful LED reversing/work lights - Rear of the vehicle modified with CNC-manufactured panels and high-quality LED taillights installed in multiple steps - Strategically placed hatches for access to relevant systems underneath the body - Precisely cut...

Tahun pembuatan: 2015, Kondisi: diremajakan ulang (bekas),

Kondisi: baru, payload capacity 150,000 kg length 12,000 mm width 5,000 mm height 1,400 mm rear axle: steerable front axle: steerable tire size: 645 x 250 mm dimensions (L x W x H): 14.4 x 5.0 x 1.4 m Heavy-duty trailer featuring: - Twin steering system - Small turning radius - Extremely robust, resulting in low maintenance requirements Ndsdpfx Aajftd Udshsf - Swappable drawbar - 12 mm steel plate platform - Standard paint finish; custom RAL colors available on request Chassis: 16 wheels (645 x 250 mm) on 8 axles and 4 bogies The platform is delivered in two sections, each measuring 2,500 x 12,000 mm, and assembled on site. Different load capacities and dimensions available upon request. Please contact us for more information.

Kondisi: baru, berat kosong: 8.000 kg, berat muatan maksimum: 80.000 kg, berat keseluruhan: 88.000 kg, konfigurasi gandar: 4x2, pendaftaran pertama: 11/2024, inspeksi berikutnya (TÜV): 11/2025, panjang ruang muatan: 6.000 mm, lebar ruang muat: 2.400 mm, tinggi ruang muatan: 1.100 mm, suspensi: hidrolik, warna: biru muda, Tahun pembuatan: 2025, berat operasi: 88.000 kg, Heavy-duty industrial transport trailer with hydraulic lift Eight axles, hydraulically raising and lowering the trailer via control valve (lift/lower function) All-wheel steering Designed for front and rear coupling Transport platform of 50 mm Douglas fir or without a floor, according to customer requirements Optional with hand brake or pneumatic braking system Ndjdpfeva E Tksx Aahsf Optional dual-side lighting system Further information available on request.