Trailer tugas berat

WMT D20/8,0 x 3,0

Tahun pembuatan: 1985, Kondisi: siap digunakan (bekas), Table dimensions: 1435x460mm, Number/Width/Spacing: 5/16/80mm, Control system: TNCi-120, Length: 1435mm, Width: 2330mm, Height: 1648mm, Weight: 3.1t, with documentation, accessories available, no known defects, on-site inspection possible. Ijdelbmupopfx Aa Nsht

Kondisi: baru, Tahun pembuatan: 2023, I am selling an alligator shear, metal shear suitable for cables, pipes, and profiles. Ihsdpfslhrb Hex Aa Nst Max. cutting force: 630 kN Cutting length: 600 mm Max. jaw opening: 280 mm Hydraulic pressure: 25 MPa Full cycles per minute: 7–8 ×/min Power consumption: 7.5 kW Weight: approx. 1,400 kg Dimensions (L×W×H): 1,600 × 700 × 1,300 mm

Kondisi: baru, Payload capacity 15,000 kg Length 10,000 mm Width 2,450 mm Height 625 mm Rear axle: steerable Front axle: steerable Tire size 425 x 260 mm Machine weight approx. 2.9 t Required space approx. 11.7 x 2.5 x 0.625 m Heavy-duty trailer equipped with: - Twin turntable steering - Small turning radius - Tip-proof due to steering angle limiter - Robust construction, low maintenance - Removable drawbar, length 1,320 mm - Impregnated wooden platform - Standard paint finish may vary. Custom RAL colors available upon request. Isdpsfrzvlofx Aa Nsht Different payloads and dimensions required? Please contact us.

Tahun pembuatan: 2023, Kondisi: baru, For sale: Alligator shear, cable shear, also suitable for metal. Model: AS/250 Max. cutting force: 250 kN Cutting length: 300 mm Max. opening: 160 mm Hydraulic pressure: 15 MPa Full cycles per minute: 10-15 ×/min Ihodpfx Aoku Ag Sea Nst Power rating: 5.5 kW Weight: 450 kg Dimensions (L×W×H): 1200 × 980 × 1200 mm

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms Ihodpfx Aaohzbipo Nst - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: bekas, hydraulische-tafelschere-steiner-hts30-20r Ihedpfx Asd Hxx Aoa Not

Tahun pembuatan: 2003, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: MBUT136, ! Bargain Price ! Price starting from €1,150 R.Stahl Single-Girder Suspension Crane / Overhead Crane / Crane Runway / Workshop Crane / Gantry Crane Load capacity: 250 kg 7 cranes available: 4: Steel suspension crane, load capacity 250 kg, width 6.35 m, span 5.6 m 5: Steel suspension crane, load capacity 250 kg, width 2.65 m, span 1.9 m 6: Steel suspension crane, load capacity 250 kg, width 4.85 m, span 4.35 m 7: Steel suspension crane, load capacity 250 kg, width 2.90 m, span 2.35 m 9: Steel suspension crane, load capacity 250 kg, width 6.0 m, span 5.5 m 10: Steel suspension crane, load capacity 250 kg, width 1.03 m, span 0.74 m (1,150 €) 11: Steel suspension crane, load capacity 250 kg, width 1.65 m, span 1.25 m Track gauge can be modified, end carriages are bolted with 8 bolts. Runways (IPE 200 – not available) Trolleys are adjustable to fit girder size. Including complete control unit, pendant control station. Ijdpfx Aasigl R Re Noht All cranes are electrically operated on all 3 axes. Lifting height / hook travel: approx. 4 m Connection: 400V 16A, year of manufacture: 2003 Very good condition, units were only used for maintenance – barely used. Shipping by freight carrier, collection preferred. Location: 75053 Gondelsheim, Germany Shipping cost by postal code upon request – we will provide you with a prompt, non-binding offer!

Kondisi: bekas, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact processing center for deburring, deslagging, derusting, oxide layer removal, edge rounding, fine grinding up to polishing of metal surfaces. This machine is suitable for heavy-duty applications. With a fixed working height, the machine can be optimally integrated into a production line and is suitable for processing large parts. Working width: 650 - 1650 mm Iodpfx Aenah Taea Noht Maximum part weight: 2000 kg Wide belt with abrasive belt length: 3250 mm Standard with vacuum holding system, optionally with magnetic holding system By using abrasive belts with a length of 3250 mm, you achieve a consistently smooth surface and reduce consumable costs, as these belts offer a longer service life. The modular design of these machines allows for the optimal configuration according to the customer’s processing requirements. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine frame and feed table, combined with advanced mechanics and electronics, make this series a universal processing center for deburring and finishing applications. Please contact us for further information and images via mail(at) or *

Kondisi: bekas, Tahun pembuatan: 1987, Press force / t Stroke / mm Table size / mm Machine weight approx. 65,000 kg Manufacturer: Schäfer Model: SVRM Iedpjuddcaefx Aa Njht 4-Roller Plate Bending Machine: Year of manufacture: 1986 Working width: 3,000 mm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest pipe diameter with 360 mm roller: Ø 460 mm Plate thickness up to (depending on material): 50 mm Material SA-738 B working width: 2,500 mm Material SA-738 B material thickness: 35 mm Cone Bending: For cone bending, all rollers except the top roller can be tilted. The roller positions can be read off the display instruments. For semi-automatic or fully automatic machine operation, the roller bearing blocks are equipped with scale strips and cam followers for limit switch activation. This allows the rollers to return to the same preset position each time, resulting in very high uniformity of the rolled shells.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: listrik, berat keseluruhan: 2.500 kg, berat muatan maksimum: 2.500 kg, tipe tiang: telescopik, Self-propelled battery-powered crane from the renowned Italian manufacturer JMG, model MC25S with radio control, offering a lifting capacity of 2,500 kg. Brand new unit, available for viewing. Official distributor, 12-month warranty. CRANE CLASSIFICATION ACCORDING TO UNI ISO 4301-1: A3 EUROPEAN DIRECTIVES: 2006/42/EC (Machinery Directive) 2004/108/EC (EMC) 2006/95/EC (Low Voltage Directive) 2000/14/EC and subsequent amendments. REFERENCE STANDARDS: EN 13000:2010 UNI ISO 4301-2:2011 and subsequent amendments. WHEEL DRIVE: Electric BOOM DRIVE: Hydraulic POWER SUPPLY: Electric battery MAXIMUM LIFTING CAPACITY: 2,500 kg CRANE WEIGHT: 2,500 kg BOOM LIFT ANGLE UP: 60° BOOM LIFT ANGLE DOWN: -15° Iodjwtppzopfx Aa Neht FRAME: Designed and manufactured by JMG. Box-type, torsion-resistant frame constructed from high-strength structural steel. BOOM: Made from high-quality steel plate, formed and welded. Consists of the base section, hydraulic telescopic system, and a mechanical extension. Boom tilt and extension are hydraulically controlled by telescopic cylinders. DRIVE MOTOR: 2 electric motors, 2 kW, 24 V AC, insulation class H PUMP MOTOR: Electric motor 3 kW, 24 V DC, insulation class H PROPULSION: Electronic speed control, MOSFET type BATTERY: 24 V 420 Ah, with charge indicator POWER TRANSMISSION: Front axle driven by 2 gearboxes WHEELS: Front: super-elastic, 18x7-8", 2 units; Rear: super-elastic, 15x4 ½-8", 2 units BRAKES: Automatic brakes on front wheels STEERING: Rear wheel steering via electric motor. Max. steering angle ± 90° CONTROLS: Operated via radio remote control HYDRAULIC SYSTEM: Driven by low-noise 3 kW gear pump. Cylinders operated by electro-proportional valve block with radio remote control. Filter and safety valve. Max. working pressure 22 MPa. SAFETY DEVICES: Electronic load moment indicator and limiter STANDARD EQUIPMENT: • Maximum capacity 2.5 t • Front-wheel drive via 2 reducers (one per wheel) • Hydraulic telescopic boom (1 fixed section, 2 telescoping sections) • Manual mechanical boom extension • Battery set 24 V 420 Ah • Stationary battery charger • Work lights • Warning beacon • Fire extinguisher • Radio remote control for boom and drive wheels • Electronic CE-compliant load indicator and limiter • Boom tilt angle +60° / -15° • CE conformity declaration • Operating manual, technical documentation, declarations INSTALLED OPTIONAL EQUIPMENT: • 2.5 t hydraulic winch • Non-marking tyres • Battery water replenishment system • On-board mobile charger • Manual 3-position jib (1.0 t)