Tekan kolom tunggal - hidrolik

WMW Zeulenroda PYTE 3.15

Kondisi: bekas, Tahun pembuatan: 1970, nomor mesin/kendaraan: 120895, EN-TRANSLATION-001 Lhsdpfxefx Hv Hs Aahor

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Lhodpfefxyhfox Aahjr Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), SMG HZPU 8000-3000/2100-S1 Hydraulische Ziehpresse Marke: SMG Typ: HZPU 8000-3000/2100-S1 Lodpfon Awd Rsx Aahehr Baujahr: 1995 Beschreibung: Hydraulische Ziehpresse, H-Rahmen-Bauweise Presskraft: 800 t Spannfläche: ca. 3.000 x 2.100 mm Einbauhöhe: max. 1.400 mm

Kondisi: baik (bekas), Tahun pembuatan: 1983, FGSH 50 TOS KURIM milling machine. Lhododqp Euspfx Aahor Year of manufacture: 1983 (Czech Republic). Double-swivel milling head (new bearings, new gears). Horizontal support beam with sight. Specifications: Table: 630 x 1800 mm. Travels: X - 1430 mm, Y - 670 mm, Z - 500 mm. ISO 50. Spindle speed range: 45-1400 rpm. Main motor power: 15 kW. Total power requirement: 23 kW. Dimensions: Length x Width x Height: 3200 x 2475 x 2620 mm. Weight: 6500 kg.

Tahun pembuatan: 2004, Kondisi: baik (bekas), nomor mesin/kendaraan: 0441057, Offer 23300 Technical Specifications: - Abrasive belt dimensions: 75 x 2000 mm - Surface grinding opening: 75 x 300 mm - Adjustable-angle support vise: 90° to 30° - Belt speed: 15 + 30 m/sec Lhodpfx Aspug D Ejaher - Possible contact wheel diameters: 20 - 76 mm - Contact wheel length: 75 mm - Drive: 400 V / 2.2 / 3 kW - Drive speeds: 1440 / 2880 rpm - 1 piece contact wheel: 48 mm - Required floor space (approx.): W 800 x H 1000 x D 1300 mm - Weight (approx.): 250 kg

Kondisi: bekas, Tahun pembuatan: 1997, druck-40-t Lhodpjvuuckjfx Aaher

Kondisi: baik (bekas), Tahun pembuatan: 1969, Pneumatic gluing press, max. pressure 10 bar, heated gluing beam, bonding area 550 x 40 mm, infinitely variable temperature control for both upper and lower gluing beam from 0 - 300 °C, stepless adjustment of bonding hold time, drive power: 5 kW, 380 Volt-50 Hz, two-hand operation by SIEMENS. Pressure build-up via toggle lever, max. opening stroke approx. 30 mm. Lsdpsd Dxqbofx Aahehr

Kondisi: baik (bekas), Tahun pembuatan: 2010, daya laser: 4.000 W, Trumpf 5-axis laser machine, year of manufacture 2010, Siemens control unit, travel path X/Y 4000/1500 mm, 1 cutting head, laser power 4 kW, laser on-time 47,950 hours, beam-on time 6,200 hours, ADC cutting head 155 mm, positioning laser diode, teach panel, operating cycles, Trumpf remote connection, machine weight approx. 19,000 kg, Lhsdpfx Asvbdy Eeahsr

Tahun pembuatan: 1980, Kondisi: baik (bekas), nomor mesin/kendaraan: 3253-80, Offer 22045 Technical data (approx.): - Pressing force: 10 t - Throat depth: 150 mm - Table size: 520 x 320 mm - Table height adjustment: 160 mm - Table through hole: 165 x 125 mm - Max. daylight (installation height): 220 mm - Ram area: 240 x 150 mm - Ram bore (taper hole): 30 mm - Ram adjustability: 40 mm - Stroke adjustment: 4 - 60 mm - Strokes per minute: 130 1/min - Hydraulically actuated clutch - Two-hand operation - Electric foot switch - Separate control cabinet - Drive: 380 V / 1.1 kW Lodpfx Ajktg Dhsahjhr - Required floor space (approx.): W 1000 x H 1800 x D 1100 mm - Weight (approx.): 1300 kg

Kondisi: baik (bekas), Tahun pembuatan: 1995, 24315 Technical Data: - Abrasive belt dimensions: 2000 x 100 mm - Surface grinding opening: 400 x 100 mm Ljdpfx Aaet Stfhohshr - Support vice – angle adjustable: 90° to 30° - Fine adjustment of support via handwheels - Abrasive belt speed: 30 m/sec - Contact wheel / grinding roller: Ø 42 mm - Drive: 400 V / 2880 rpm / 3 kW - Space requirement: approx. W 700 x H 1200 x D 1200 mm - Weight: approx. 225 kg - 10 contact grinding rollers approx. Ø 10 + 18 + 22 + 24 mm, 28 + 33 + 36 + 48 + 60 + 68 mm