Penggergajian lengkap (mobile)

Woodmizer LT70 Wide

Kondisi: baik (bekas), Tahun pembuatan: 2007, - SIEMENS 840 D control - Bar capacity: 65 mm - Main and sub spindles with maximum speed of 5,000 rpm - C-axis, Y-axis - 3 turrets, each with 12 stations (all driven) - Driven tool speed: 4,000 rpm - Tool holder VDI 30 with drive according to DIN 5480 TRAVELS X1 = 165 mm, Z1 = 220 mm X2 = 165 mm, Z2 = 150 mm X3 = 165 mm, Z3 = 650 mm, Y3 = 80 mm (+50/-30) EQUIPMENT Coolant system Chip conveyor Bar loader TOP Automazioni XF 375 Hjdpfouw Izvsx Afcofp

Kondisi: sangat baik (bekas), Horizontal panel saw with rear lift table Control: MCS Evolution Software included Lift table (mm): No. 1 Rear Sliding Device Program-controlled Pusher Device No. 9 Gripper Clamps Max. cutting width (mm): 3300 Pusher effective stroke (mm): 3300 Max. saw blade projection (mm): 105 Max. gripper opening (mm): 105 Scoring saw (max. blade diameter, mm): 200 Main saw (max. blade diameter / power): 360 mm / 18 kW Hfodop R Sdhspfx Afcsp Adjustable saw carriage feed rate (m/min): 5–120 No. 3 Front Air Cushion Tables Total connected load (kW): Approx. 21

Kondisi: bekas, Tahun pembuatan: 2013, produsen pengendali: Siemens, model controller: 840 Dsl, Description: General: Year of manufacture: 2013 Control: Siemens 840 Dsl Turning length: 1,185 mm Swing diameter: 540 mm Bar capacity: 75 mm Main spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 32 kW Max. torque: 360 Nm Chuck: SMW KNCS -N 260-78 C-axis: 0.001° Flushing: Chuck flushing Counter spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 32 kW Max. torque: 360 Nm Chuck: SMW KNCS -N 260-78 Hfodpfxexl Nfqj Afcop C-axis: 0.001° Flushing: Chuck flushing + through-spindle flushing Tool carrier I (X/Y/Z/B): Technology: Milling spindle on moving column Milling spindle speed: 12,000 rpm Max. power: 22 kW Tool holder: Capto C6 X-axis: 450 mm Y-axis: 200 mm Z-axis: 1,200 mm B-axis: +/- 110° Position measuring systems: Direct (glass scales) Tool carrier II (/X/Y/Z): Technology: Turret on cross slide Tool drive: Direct drive Speed: 10,000 rpm Power: 14 kW Torque: 34 Nm X-axis: 195 mm Y-axis: 80 mm Z-axis: 1,200 mm Tool holder: VDI 40 Number of tool stations: 12 pcs Automation: Technology: Gantry loader with stacking magazine Workpiece diameter: 50 - 200 mm Max. workpiece height: 230 mm Max. workpiece weight: 15 kg Number of stacking units: 20 pcs Max. load per stacking unit: 40 kg Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system, 80 bar Tool magazine: Chain magazine, 120 stations Workpiece measurement: Renishaw probe Tool breakage monitoring: Swing wire Automation: Gantry loader with stacking magazine Emulsion mist separator: Mechanical Setup mode: Electronic handwheel Work area door: Automatic Chucks: 2x SMW KNCS 260 Tool holders: Various Capto C6 holders

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, jam operasional: 26.678 h, Fungsionalitas: berfungsi sepenuhnya, translation_01 Hedsxl Arkopfx Afcsfp

Kondisi: bekas, Tahun pembuatan: 2010, Maximum turning diameter: 410 mm Turning length: 1,235 mm Control: IT / Turn Plus Heidenhain Swing diameter over bed: 700 mm Main spindle speed range: max. 4,000 rpm Main spindle drive power: 35 / 45 kW Max. torque: 770 Nm Spindle nose: 220 h5 Spindle diameter at front bearing: 160 mm Max. usable bar diameter: 95 / 104 mm C-axis: 0.001° Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range of driven tool stations: max. 4,000 rpm Drive power driven tool stations: 12 kW Max. torque driven tools: 36 Nm Hedpfx Afovzhiwjcofp Tool holder: VDI 40 DIN 69880 Turret indexing time (30°): 0.4 sec Y-axis: 120 (+/- 60) mm X-axis: 300 mm Z-axis: 1,300 mm Y-axis: +/- 60 mm Tailstock travel: 1,200 mm Tailstock taper: MK 5 Clamping pressure: 1,400 daN Rapid traverse (X / Y / Z): 30 / 22.5 / 30 m/min Total power requirement: 60 kVA Machine weight: approx. 7.7 t Space requirement: approx. 6.0 x 3.5 x 2.5 m CNC Turning and Milling Center GILDEMEISTER - CTX beta 1250 V4 - Tailstock - Y-axis - Driven tools - Direct measuring system - Bar machining package - Interface for bar feeder / bar loading magazine

Kondisi: bekas, nomor mesin/kendaraan: 005521, X-axis working area: 4000 mm Y-axis working area: 1400 mm Working surface: With vacuum console supports Hsdpfx Asvctlgsfcofp Main spindle power: 15 kW Number of controlled axes: 4 axes Number of drilling spindles: 30 Number of tool positions: 24

Tahun pembuatan: 2005, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, berat kosong: 1.600 kg, berat muatan maksimum: 1.000 kg, tinggi dalam: 1.200 mm, panjang dalam: 1.390 mm, lebar dalam: 1.390 mm, daya nominal: 64.000 kW (87.015,68 hp), kapasitas pompa: 500 l/menit, tekanan pompa: 450.000 batang, kapasitas tangki air: 800 l, nomor mesin/kendaraan: 25191, Industrial machine and parts cleaning device. Equipped with three washing chambers: one main chamber and two auxiliary chambers. Technical condition: excellent – used only a few times. Model number: C-1600-33EHSS-PD1 Serial number: 25191 Main machine components: - Washing chamber door (with actuators) - Upper washing nozzle - Lower washing nozzle - Pressure pipelines - Control cabinet Hedpfx Aforkz Stjcefp - Main washing pump - Auxiliary pump 1 - Auxiliary pump 2 - Water heater (for each chamber) - Drain valve - Water level sensor - Parts washing basket - Oil separator - Steam vent - Water pressure gauges - Automatic water filling and chemical dosing system Additionally, the set includes a reverse osmosis water filter.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, X-axis travel: 850 mm Y-axis travel: 520 mm Z-axis travel: 475 mm Spindle speed: 10,000 rpm Spindle taper: HSK 100 Tool changer: 40 positions Control system: SIEMENS 840 Dsl Power: 33 kVA Hodpfjwvr Tnox Afcefp Including: internal coolant supply (IKZ), various tool holders, measuring probe TS 649, Rotoclear Spindle hours: 10,730 h

Kondisi: bekas, nomor mesin/kendaraan: 007601, Working area X-axis: 4320 mm Working area Y-axis: 2245 mm Hfedpsu N Skfefx Afcjp Working table: Nesting table Main spindle power: 9 kW Number of controlled axes: 3 axes Number of drilling spindles: 16 Number of tool positions: 8

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 278 h, Max. workpiece size for edge milling X = 3620 mm; Maximum travel paths: X = 3865 mm Minimum room height 3.20 m Processing in Y and Z Y = 1600 mm; max. panel width 2000 mm Maximum workpiece height 300 mm Measured from upper edge of vacuum cup 125 mm MACHINE OPERATION SOFTWARE CAMPUS V7 Plus CAD/CAM software 1 x license incl. CabinetControl Base and material removal simulation 1 pc. software license secured via license dongle for the machine CabinetControl Base Software for furniture planning and production CAMPUS V7 PLUS, software for CNC machining centers ADDITIONAL MODULE HIGH-SPEED MILLING Control Siemens industrial PC control Handheld device for remote machine operation MILLING HEAD 5-axis head 7840, power: 12 kW n(max.) = 0 - 24000 rpm, steplessly adjustable Cardanic; C-axis rotatable +/- 360°, A-axis rotatable +/- 180° Liquid cooling (cooling unit included) with HSK-F 63 tool holder Tool weight max. 6 kg Milling tools: max. Ø 200 mm Saw blades: max. Ø 350 mm with optional 7886 pick-up changer DRILLING UNIT Pressure booster for increasing standard pressure from 6 to 8 bar Drilling unit 7881, 24 spindles Drive power 3.0 kW, incl. sawing unit 18 vertical spindles individually selectable L-shaped arrangement, 11+2 in X-, 6 in Y-direction, 32 mm pitch n (max.) 1000 - 5710 rpm, steplessly adjustable 6 horizontal spindles 2 double drilling units in X-direction 1 double drilling unit in Y-direction includes sawing unit Integrated sawing unit for sawing/grooving in X-direction n(max.) 1000 - 7330 rpm, steplessly adjustable MACHINE TABLE Hsdpjxfaf Ujfx Afcefp Machine table, 6 consoles, pneumatically clamped, movable in X-direction Display and definition of consoles and suction cups in the program 2 lateral stops at field A and D, 2 large push buttons for clamping and releasing workpieces, 2 measuring tape displays for positioning the consoles in X in relation to stop field A/D, measuring tape displays for suction cups at each console in Y, relative to rear stop STOPS 2 additional processing fields front for 6 consoles (4-field processing) 4 pneumatically controlled stops per field, one per console and one additional lateral stop in X-direction LOADING AIDS 4 pneumatically raised and lowered loading aids for easy handling of heavy parts TOOL CHANGER Tool changer 7996, 18-position magazine (carousel) travelling automatically in X-direction Travelling tool changer 7886, single saw blade magazine Specially for large saw blade diameters up to 350 mm Pick-up system mounted on the gantry, pneumatic Max. Ø tool: Ø 350 mm Tool changer 7892, 16-position linear pick-up VACUUM PUMP 140 m³/h dry-running LED light for the work area. SAFETY OPTIONS Safety enclosure according to CE-standards Protective fence on the sides and rear EQUIPMENT VARIANTS AND ACCESSORIES LUBRICATION Automatic central lubrication Gantry extension - ideal for 4-field processing and for large workpieces. 2 controlled pneumatic modules for max. 5 frame clamping elements each per field A/D Each module can control max. 5 frame clamping elements simultaneously. Simultaneous opening/closing of the connected frame clamping elements, incl. foot pedal for actuation; max. 2 pcs. each for fields A and D can be ordered. OPTIONAL: LASER - Laser pointer Consisting of two laser pointers for positioning the vacuum cups