Mesin pengukur koordinat

Zeiss O-INSPECT 442

en-Zeiss coordinate measuring machine
Type: O-INSPECT 442
Machine designation: Coordinate measuring machine
Ffodpow Titlefx Adgjt
Machine type: O-INSPECT 442
The ZEISS O-INSPECT multisensor measuring machine enables optimal optical or tactile measurement of all features.
The CALYPSO software allows simultaneous display of actual condition, target profile, and deviations, making measurement results easy to recognize and interpret.
General data:
Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm
Measuring range: X 400 mm, Y 400 mm, Z 200 mm
Weight:
CMM 800 kg
Workpiece, max. 20 kg
CMM noise level < 70 dBA
Electrical data:
Mains voltage: 100, 110, 120, 125, 230, 240 V~ (± 10%)
Current type: 1 / N / PE
Frequency: 50 to 60 Hz (± 3.5%)
Power consumption: max. 1500 VA
Fuse:
At 230 V or 240 V: 16 A
At 100 V or 125 V: 15 A
Travel speed:
Creep mode: SLOW function: 0 to 5 mm/s
Setup mode: 0 to 70 mm/s
Series measurement operation:
Axis (X, Y) max. 200 mm/s
Axis (Z) max. 50 mm/s
Axis (3D) max. 287 mm/s
Ambient conditions:
For flawless operation of the coordinate measuring machine, the following conditions must be met.
Ambient temperature for readiness: +17˚C to +35˚C
Relative humidity: 40% to 70% (non-condensing)
Room temperature for measurement operation: 20˚C ±1 K
Altitude above sea level:
100–125 V: max. 3000 m above sea level
230–240 V: max. 2000 m above sea level
Probe system:
Probe system CFS
Probe type data:
Probe type CFS 2mm
Measuring range: 2 mm, working distance: 61 mm, measurement spot diameter: 12.5 µm
Measurable surface inclination to incidence direction: 90 ± 15°
Measuring range: 3 mm, working distance: 22.5 mm, measurement spot diameter: 12 µm
Measurable surface inclination to incidence direction: 90 ± 30°
Measuring range: 10 mm, working distance: 70 mm, measurement spot diameter: 24 µm
Measurable surface inclination to incidence direction: 90 ± 20°
The values for surface inclinations are limit values and depend on the reflectivity of the workpiece surface.
Rotary table:
Mass and resolution
Mass of rotary table: 7 kg
Resolution: 0.15''
Dynamics:
Angular speed: max. 50˚/s
Rotational speed: 8.3 min-1
Scope of delivery:
In its standard configuration, the coordinate measuring machine type O-INSPECT is supplied with the following components:
Coordinate measuring machine (CMM)
Control (integrated)
Operator console
Computer with peripherals
Software – CALYPSO 5.2
Documentation
Probe system
Reference stylus
Calibration artifact
Calibration template
Scope of delivery: (Zeiss coordinate measuring machine as shown)
Condition: used
(Technical data subject to change and errors excepted!)
Please request transport options before purchase.

If you have further questions, we will be happy to answer them by phone.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.