DRUM CHIPPER

ZENO ZTH 1000 / 720 E 330

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Blsdpfx Aajw Sy T Hs Ted Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Tahun pembuatan: 2011, Kondisi: hampir baru (bekas), For sale: 1 roller conveyor, each including a geared motor. Technical data: Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Bjdpfx Aaeihpn Ns Tsld Load capacity: up to 4 tons Geared motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details, see type plate image) Three out of four roller tracks are equipped with a wooden side wall along the entire length. One roller track has a wooden side wall for a length of 5.20 m. Two out of four roller tracks are each equipped with 3 lateral removal systems (see pictures).

Kondisi: bekas, Tahun pembuatan: 2002, jam operasional: 37.000 h, nomor mesin/kendaraan: 1651, jangkauan lengan: 15.200 mm, kapasitas angkut: 1.900 kg, lebar track: 3.000 mm, Perlengkapan: derek, kabin, Year of manufacture: 2002 Machine number: 1651 Track width (m): 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Lifting capacity without grapple: 1,900 kg at 15.0 m Grapple: included Crane position: behind the cab Cabin side: center !! Sale on behalf of customer !! Bledpfx Aov Hwk Uea Ted

Kondisi: baik (bekas), Mesin: 18,5 kW Dimensi pemotongan Diameter maksimal kayu gelondongan: 95 cm Bodpfx Aoxhb Uvoa Tjld Jarak bebas antar rol: 73 cm Lebar pemotongan maksimum (balok): 64 cm Tinggi pemotongan maksimum di atas mata gergaji: 39 cm Panjang pemotongan maksimum: 12 m Perlengkapan kepala mesin Perangkat pengaturan tebal pemotongan otomatis Gerak kepala atas/bawah: Elektrik Gerak kepala maju/mundur: Elektrik Lengan pemandu mata gergaji: Elektrik Sistem penegang mata gergaji: Hidrolik dengan bantalan udara Pengupas kulit kayu Diameter lubang pembuangan serbuk gergaji: 150 mm Mata gergaji pita Panjang: 4670 mm Lebar: 38 mm / 50 mm Roda pemandu mata gergaji Diameter: 600 mm Tipe: Dengan sabuk Material: Besi cor Full hidrolik

Kondisi: baru, Tahun pembuatan: 2025, Output capacity: 25 and 40 kg/h Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Hopper volume: 0.38 m³ Blodpfopfatpsx Aa Tod Power consumption: 4 kW Machine length: 1,860 mm Machine width: 890 mm Machine height: 1,100 mm Weight: 400 kg

Kondisi: baru, Tahun pembuatan: 2024, ♻ Universal application (wood, pallets including nails and staples, wood fibre boards and remnants, veneers, MDF boards, plastic, etc.) ✔ Motor power: 18.5 kW Blsdpfx Aehzlr Isa Tsd ✔ Rotor length: 870 mm ✔ Rotor diameter: 270 mm ✔ Rotor speed: 80–120 rpm ✔ Number of cutting knives: 2x19 ✔ Granulation: 10–50 mm ✔ Capacity: up to 7 m³/h* ✔ Extraction port: 200 mm ✔ Feed opening: 1,446 x 1,565 mm ✔ Dimensions (L/W/H): 2.15 / 1.97 / 2.04 m ✔ Weight: 2,050 kg 2-year warranty or 2,000 operating hours

Kondisi: baik (bekas), The debarker is perfectly suited for processing both hardwood and softwood logs. - Trolley made of heavy-duty steel construction - 5 pairs of drive wheels - Milling arm constructed from heavy-duty steel - Hydraulic milling head - 22 kW motor Please note: The log feeder visible in the photo is not included in the offer and is available at an additional cost of 25,000 PLN / 5,500 EUR. Bjdpotuyr Iefx Aa Told

Kondisi: sangat baik (bekas), Offered is a used solid matter pump / wastewater pump. Manufacturer: SDAG Wismut-Aue. For further details, please refer to the photos. Blodpfx Ajhwnfcsa Tod

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, de-to-hu-01 Bljdpfx Ashhnblja Tod

Kondisi: baru, gaya penekanan: 100 t, panjang langkah: 400 mm, - Cylinder stroke 400 mm - Working width 1010 mm - Cylinder is movable Blodpfogp Dc Rex Aa Tsd - Electrically or manually operated - Pressure gauge - Emergency stop - 400V