Mesin bubut berat

ZERBST DXP 5 / W15x15000

Kondisi: baik (bekas), Tahun pembuatan: 2012, Suku cadang yang ditunjukkan dengan tangan tidak termasuk. X1020mm Y610mm Z610mm. 12.000 rpm, 25 kW, 160 Nm. Unit kontrol: HEIDENHAIN iTNC 530. Sumbu keempat akan dikirim tanpa suku cadang yang ditunjukkan dengan tangan. Pedpfxex Awzbo Al Ijpr

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak tempuh: 496.003 km, daya: 308,91 kW (420,00 hp), pendaftaran pertama: 01/2008, jenis bahan bakar: diesel, konfigurasi gandar: 8x4, tipe perpindahan gigi: mekanis, kelas emisi: Euro 4, suspensi: baja, Tahun pembuatan: 2008,

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jam operasional: 1.120 h, Aristech control unit (similar to FANUC) Number of axes: 4 Table dimensions: 640 x 470 mm X travel: 425 mm Y travel: 300 mm Pjdpfx Alevvl Uao Ispr Z travel: 250 mm Max. workpiece size: 800 x 600 x 250 mm U axis Weight: approx. 3,000 kg Dimensions (LxWxH): 1860 x 2050 x 2100 mm The machine consists of the following units: 1. Wire EDM machine – main unit 2. CNC control cabinet 3. Water tank + pump 4. Water chiller 5. Transformer No. 1 6. Transformer No. 2 (power supply) Very little used. Still under power.

Kondisi: baik (bekas), Tahun pembuatan: 2000, lebar meja: 1.000 mm, panjang meja: 1.800 mm, lebar pelat tuas: 600 mm, panjang total: 25.000 mm, lebar total: 27.000 mm, tinggi total: 47.000 mm, berat keseluruhan: 43.000 kg, langkah bantalan cetakan: 200 mm, Siemens Simatic OP 27 control system Pjdpfstiwgiox Al Iopr Sick photoelectric sensor Separate Rittal control cabinet Side walkways Floor-level installation

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10014777, berat keseluruhan: 1.300 kg, kapasitas angkut: 210 kg, jangkauan lengan: 2.696 mm, We offer industrial robots from the manufacturer KUKA. The scope of delivery includes the robot arm, control cabinet, and the associated cables. The robots come from a fully operational system and have been professionally dismantled. We carry out a functional test and inspect the robots. Ppsdpfxsq Suwbo Al Ier Should you be interested, we offer the opportunity to demonstrate the functions, ensuring that they meet your requirements. - Optional Addition for a Surcharge - We are pleased to introduce a new feature for our robots: the Siemens S7-1200 Profisafe safety controller. With this controller, you can easily integrate an emergency stop function, a safety door, and a start-stop interface via the Profisafe bus. The controller is fully planned and programmed, allowing you to realize a straightforward stand-alone solution with a robot and a safety fence. Additionally, we offer further support for commissioning upon request. We grant a 14-day return policy for this. Any further warranties are excluded. We maintain an extensive inventory of these robots, and the prices listed apply as a package price. Discounts can be negotiated for larger order quantities. We invite you to contact us again to discuss further details. Sale exclusively to commercial customers.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 2.000 h, Fungsionalitas: berfungsi sepenuhnya, tinggi pembubutan: 3.000 mm, berat benda kerja (maks.): 30.000 kg, diameter pembubutan: 3.500 mm, daya: 100 kW (135,96 hp),

Kondisi: bekas, Tahun pembuatan: 1999, x-travel 12,000 mm y-travel 3,600 mm z-travel 1,500 mm Spindle speeds 3,000 rpm Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3,600 mm Cross (Z-axis): 1,500 mm Longitudinal (X-axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of spindle nose measured from floor (head horizontal): 855 mm Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7 : 231 : 3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse X-axis: 12,000 mm/min Z/Y-axis: 15,000 mm/min Feed motor output Psdpoxwdygefx Al Iopr X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Precision Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Compressed air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyor are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, jam operasional: 1.500 h, Fungsionalitas: berfungsi sepenuhnya, gaya potong: 630 t, daya: 90 kW (122,37 hp), berat kosong: 36.500 kg, lebar total: 2.400 mm, panjang total: 9.500 mm, berat keseluruhan: 40.000 kg, panjang pemotongan (maks.): 1.600 mm, tahun perombakan terakhir: 2024, jenis arus masuk: tiga fasa, tekanan kerja: 220 batang, Scrap Shear MS-6300e (scrap shear with electric motor) without operating fluids. A 250 kW diesel generator can be offered separately. Model: MS-6300e Cutting force: 630 t Cutting length: 1600 mm Discharge height: 500 mm Power: 110 kW Capacity: 12-17 t/h Machine weight: 40 t (+diesel generator 4 t) Hopper size: 3850 mm x 2600 mm x 1500 mm Information: A scrap shear is designed for efficient metal scrap cutting: - Simple automatic operation Ppodpfx Ajuu Upgol Ier - Energy-saving - Cost-effective - No foundation required Function: Scrap material is loaded into the feed area with the help of an excavator. Thanks to the horizontal loading area and the weight of the scrap itself, the material drops down into the charging chamber and the cutting zone. The scrap is compressed against the front wall and sheared by a horizontally moving tool-holder side as it presses the material through the knives on the end wall. As the tool carriage moves horizontally, the processed material is pushed through the knives at the container’s front wall. On the return stroke, scrap advances into the shear interior under its own weight. Scrap shears are available in various configurations according to customer requirements, and the output size can be selected for new orders. Inspection and test operation are possible.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Löser centreless tube grinding machine – belt grinding machine – centreless tube polishing machine – cylindrical grinding machine Ppjdepugwispfx Al Ijr Centreless tube grinding / polishing machine for workpieces with a minimum length of 1100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing and has since processed approximately 10,000 parts. Afterward, the machine was no longer used. As part of the general overhaul, the motors, bearings, and the entire control cabinet including frequency converters were completely renewed. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not currently included. We can retrofit this to your specifications upon request. The transport systems (roller conveyors) between the grinding stations will also need to be adapted and retrofitted to match your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors have a power rating of 7.5 kW per station. The system can be inspected by appointment at our warehouse in D-63128 Dietzenbach.

Kondisi: bekas, Tahun pembuatan: 1994, en-GB-001 Ppjdpfol Su Rxox Al Ijr