Mesin penghancur

ZERMA ZWS 600 SMART

Kondisi: baru, Tahun pembuatan: 2024, New machine Nodpst Hagnefx Aahjdf Year of manufacture: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper volume: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput performance: up to 50 kg/h (depending on material) Paint finish: Weima standard Connected load: 400 V +/- 5% / 50 Hz Including: Press mechanism with filler cylinder, main cylinder, clamp cylinder Connector for transport pipe Chromed clamp Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw discharge chute + motor Side walls standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with level limit switch Material: planer shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput performance: approx. 50 m³/year/ * Foreign matter specification: Anything other than wood, wood pieces larger than 12 mm. Throughput is highly material-dependent. Listed figures are average values. Depending on mix ratio, moisture content, and material characteristics! Application case not or not fully known/specifed. Machine is sold appropriately and solution-oriented by a specialist dealer. With heat buildup in the hopper, running time may be drastically reduced depending on heat development. Availability: promptly Location: Solingen

Tahun pembuatan: 2002, Kondisi: bekas, System: Used Decanter / Mobile Centrifuge Manufacturer: Hiller Model: Full Jacket Scroll Decanter Centrifuge Type: DP45-422 Decapress Machine No.: 2884 Ndedpfxoppt Sfo Aahsf Year of manufacture: 2002 Max. permitted bowl speed: 3800 rpm Bowl inner diameter: approx. 450 mm Bowl material: HII/St52 Electric motor: 30 kW Total weight: approx. 3650 kg Purchase and rental available.

Kondisi: baru, Tahun pembuatan: 2026, Custom paternoster stacking systems available in various technical configurations for sawn timber lengths from 3.0 to 6.0 m (other lengths available on request). Ndsdpfx Aor Nx Tmoahef Options: • With or without batten bundling (various designs available to suit requirements) • With or without batten magazine – single or double chamber as required, equipped with pneumatic gripper • Infeed and outfeed transport systems available according to customer specifications

Tahun pembuatan: 2024, Kondisi: baru, RSS 600 Series Mono Rotor Shredder (new series) Pictured here is a complete installation, including a feed conveyor or discharge screw, suitable for the plastics industry. 18.5 kW 40x40 mm blade block. Rotor length approx. 600 mm Feed hopper approx. 600 x 900 mm Nedpsirt H Asfx Aahedf Screen size configurable upon request Equipped with pressure box guides and connections for feed or discharge conveyors, as well as a motor cover. NL/CE certification Suitable for processing various types of plastics, wood, or other materials. Customizations possible for motors, screens, frames, etc. Feed and discharge conveyors, storage units, and metal separation available. Larger or smaller models also available. Discharge conveyor and screw available as options. If you have any questions, please call or email us; we look forward to hearing from you. Please mention your name, company name, and telephone number.

Kondisi: siap digunakan (bekas), Migatronic MTE 440 TIG AC / DC welding machine for steel and aluminium. Water cooling unit: Migatronic CTU 3000. Maximum welding current is 440 A. Inspected and tested by EWM Service. Ndjdpfxoh Ib Idj Aahjf You are welcome to schedule a viewing. A proper invoice will be provided. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. If you have any questions, please feel free to contact us by phone. All company names and trademarks mentioned are the property of their respective owners and are used for identification and product description purposes only. Technical data and item descriptions may be subject to errors and are supplied without liability. Shipping is only available to businesses; private purchasers may collect the item in person.

Kondisi: baru, Tahun pembuatan: 2024, High-quality housing made of galvanized steel Powerful, economical motors Standard configuration with selectable intake connection (top or bottom) Ndodpfofc A Ursx Aahjf Uniform filter bags for all variants Discharge into chip collection bins The modular AL-KO AAS series models are available in optimally matched performance categories, featuring energy-saving and quiet motors that drive the raw air side fan to generate particularly effective positive pressure filtration. Durable quality components and an all-metal housing made from galvanized steel sheet ensure long-term investment security, as do the wide range of retrofit options. The particularly attractive price and short assembly times also guarantee that the AL-KO AAS is certainly the right choice. Technical data AL-KO AAS 3013 Intake connection: 200 mm Nominal airflow: 2,500 m³/h Maximum airflow: 3,300 m³/h Maximum negative pressure: 2,700 Pa Filter area: 3 x 2.2 m² Chip collection volume: 3 x 175 liters Motor power: 3.0 kW / 400 V Dimensions (LxWxH): 2486 x 578 x 2115 mm Weight: 139 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, kedalaman pengeboran: 1.250 mm, panjang total: 8.100 mm, lebar total: 6.300 mm, tinggi total: 4.300 mm, berat benda kerja (maks.): 7.000 kg, berat keseluruhan: 31.000 kg, jarak pergerakan sumbu X: 1.600 mm, jarak lintasan sumbu Y: 1.250 mm, jarak gerak sumbu Z: 1.100 mm, kecepatan spindel (maks.): 6.000 rpm, diameter bor: 36 mm, 4-Seiten-Komplettbearbeitung Schwenkbare Bohr- und Fräseinheit DCM Dynamische Kollisionsüberwachung CAM-Modell QCK (Quick Check Kinematics) Transferbohrzyklus (380-382) 90 Bar IKZ-Kühlsystem Zusätzlicher ATC-Turm 24-fach (4 x 6) HSK 63 Doppel-Spindel-Mutter-Konstruktion Sauberwassertank 1.650 L und Abwassertank 1.300 L Späneförderer Max. Bohrdurchmesser Stahl: 36 mm Bohrtiefe: 1.250 mm X-Achse Verfahrweg: 1.600 mm Y-Achse Verfahrweg: 1.250 mm Z-Achse Verfahrweg: 1.100 mm W-Achse Verfahrweg: 1.600 mm Tischbelastung: 7.000 kg Tischgröße L x B / oder Ø: 1.500 x 1.100 mm Spindelaufnahme: HSK-63Mk Spindelleistung: 23 kW Drehzahlen / Bereiche: 6.000 U/min Länge: 8.100 mm Breite: 6.300 mm Ndodpfxovn Sv Uj Aahof Höhe: 4.300 mm Gewicht: 31.000 kg

Kondisi: sangat baik (bekas), The SB-10 grinding machine enables flawless grinding of boring bars, threading tools, parting tools, or boring rods made from HSS or carbide, for use in jig boring machines or lathes. By adjusting the rake angle to match the material, you achieve optimal tool performance and extended tool life. Nowadays, these boring bars are still often ground manually before being used on high-quality machine tools. Ndsdsfqicxopfx Aahjf On the SB-10, the tools are ground using a profile wheel with a custom-shaped grinding wheel edge. The desired profile is easily achieved with a dressing diamond and a template mounted on the machine. For excellent stability and surface quality, the horizontal slide runs on cross-roller guideways. Grinding wheel (ØxWxB): 125 x 20 x 20 mm Speed: 2800 rpm Longitudinal travel: 130 mm Cross travel: 80 mm Height adjustment: 65 mm Rake angle: +25° to -10° Dimensions WxDxH: approx. 550 x 450 x 650 mm Weight: approx. 70 kg

Kondisi: bekas, Tahun pembuatan: 2011, panjang total: 4.000 mm, tinggi total: 1.600 mm, lebar total: 970 mm, Weight: 1,300 kg Price: On request - Year of manufacture: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH/115214 - Number of units: 6 - 1st unit type: Premilling unit - 2nd unit type: Glue application unit - 3rd unit type: End trimming unit - 4th unit type: Rough trimming unit Nedpfswnickjx Aahsdf - 5th unit type: Radius scraping unit - 6th unit type: Flat scraping unit - Max. edge band thickness [mm]: 6 - Max. panel thickness [mm]: 60 - Min. panel length [mm]: 140 - Max. feed speed [m/min]: 11 - Voltage [V]: 400 - Power consumption [A]: 23 - Transport dimensions: 4000mm x 975mm x 1600mm (L x W x H) - Transport weight [kg]: 1300kg - Number of transport packages: 1 Financial Information VAT: The stated price is excluding VAT VAT / margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for any items from the industrial sector Yorick Diebels

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, kedalaman pengeboran: 1.150 mm, berat keseluruhan: 12.000 kg, diameter bor: 32 mm, Heidenhain iTNC530 CNC control system 12-position tool changer Technical data / details: Travels: X-axis (table, longitudinal): 1800 mm Nodpfxswcldaj Aahjdf Z-axis (column, cross): 1700 mm W-axis (drilling unit, cross): 1150 mm Y-axis (drilling unit, vertical): 1200 mm B-axis (rotary table): 360° A-axis (drilling unit): -25 to +15° Deep drilling area (ELB): Diameter range: 6–32 mm Max. drilling depth: 1150 mm Drive power: 40 kW Machine weight approx.: 12,000 kg Technical data, accessories, and machine description are non-binding. For further technical details, see photos.