Bandsaw - Horizontal

ZIMMER Z 252 / DGH

Kondisi: baru, Cutting capacity at 90° (round): 240 mm Cutting capacity at 90° (square): 240 x 240 mm Cutting capacity at 90° (flat): 165 x 210 mm Cutting capacity at 45° right (round): 195 mm Cutting capacity at 45° right (square): 185 x 185 mm Cutting capacity at 45° right (flat): 130 x 190 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (square): 85 x 85 mm Cutting capacity at 60° (flat): 85 x 120 mm Cutting capacity at 45° left (round): 170 mm Cutting capacity at 45° left (square): 145 x 145 mm Cutting capacity at 45° left (flat): 60 x 195 mm Blade speed: 36 + 72 m/min Saw blade dimensions: 2725 x 27 x 0.9 mm Vice opening: 315 mm Working height: 900 mm Cgjdpfx Asy H N Nnoqxew Motor power: 1.2 kW Weight: 330 kg The ZIMMER Z252/DGH is a hydraulic semi-automatic bandsaw for metal fabrication. This double mitre machine swivels up to 60° to the left and 45° to the right. The machine is equipped with a rapid approach button (fast traverse to material). Equipment features: - Infinitely variable feed rate adjustable via hydraulic throttle valve - Tool-free saw blade changes thanks to quick-release fasteners - Hydraulic unit, coolant pump, control panel, base frame, saw blade, 400 V plug 16 A.

Kondisi: baru, Cutting diameter: 170 mm Bandsaw blade dimensions: 2080 x 20 x 0.9 mm Table height: 880 mm Cutting speed: 40 + 80 m/min Cutting capacity at 90° round: 170 mm Cutting capacity at 45° round: 125 mm Cutting area at 90° rectangular: 150 x 190 mm Cutting area at 45° rectangular: 95 x 120 mm Total power requirement: 1.1 kW Machine weight approx.: 0.24 t Dimensions (L x W x H): 870 x 1,550 x 1,740 mm Csdeg Trvrepfx Aqxegw This metal bandsaw is equipped with an enclosed worm gear drive. Additionally, it features hydraulic pressure regulation and a base frame rotatable by 45 degrees. Other features include emergency stop, a complete cooling system, the factory base frame, automatic shut-off, and a quick-release device.

Kondisi: baru, Cutting diameter 225 mm Saw band length 2480 mm Cutting width 250 mm Cutting speed 45 / 90 m/min Saw band dimensions 2480 x 27 x 0.9 mm Cutting capacity at 45 degrees: flat 135 x 185 - 145 x 150 mm Cutting capacity at 45 degrees: round 150 mm Cutting capacity at 45 degrees: square 145 mm Cutting capacity at 60 degrees: flat 63 x 107 - 69 x 90 mm Cutting capacity at 60 degrees: round 70 mm Cutting capacity at 60 degrees: square 70 mm Cutting capacity at 90 degrees: flat 240 x 160 - 250 x 110 mm Cutting capacity at 90 degrees: round 225 mm Cutting capacity at 90 degrees: square 185 mm Total power requirement 0.75 / 1.1 kW Machine weight approx. 200 kg Space requirement approx. 1385 x 580 x 890 mm Technical features: - Hydraulic system for controlling the saw head descent - End switch at the end of the cut - Powerful three-phase induction motor with 2 speeds and oil-bath gearbox - Saw bow, vise and pivoting assembly made of cast steel - Steel saw band guide with ball bearings - Quick-release vise - Front integrated lever for locking the miter adjustment - Coolant pump with aluminum body - Large handwheel for easy saw band tensioning Codpfelb I Dasx Aqxsgw - Pressure gauge for displaying band tension (600-1000 kg/cm3) - Emergency stop safety switch - Chip brush for cleaning the saw band STANDARD EQUIPMENT: - Mountable base cabinet - Coolant tank - Electric coolant pump - Length stop for serial cuts - Tools for band replacement and adjustments - Chip removal brush - Hydraulic cylinder with feed adjustment

Kondisi: diremaj di bengkel (bekas), Robot welding system with 2 m two-station positioner. Offered here is a robotic welding system from Yaskawa Motoman, including: RM2-250 positioner Safety technology UP20 XRC robot Codod Tfb Nepfx Aqxegw Nozzle cleaner etc. The system can be assembled and commissioned by us. We also offer the possibility of instruction or training. The system will be reconditioned according to customer specifications. We are a YASKAWA system partner and offer you comprehensive service for your Motoman robots and systems.

Kondisi: hampir baru (bekas), Profile grinding machine Utma model P20 Cgedpfoff H E Rox Aqxew

Kondisi: baik (bekas), Tahun pembuatan: 2003, kapasitas angkut: 150 kg, jangkauan lengan: 2.700 mm, Model: KR150 Kondisi: BEKAS Tahun: 2003 Kabinet Kontrol: KRC2 Termasuk: Manipulator + Kabin Kontrol KRC2 + Semua Set Kabel Silakan hubungi kami untuk penawaran harga serta opsi refurbish. Sebagai PLC Merkezi EOOD, kami memiliki lebih dari 300 robot dalam inventaris dan menangani merek KUKA, ABB, FANUC, dan Motoman. Cedshakfaepfx Aqxsgw

Kondisi: baru, Tahun pembuatan: 2026, CORMAK HBS275 Band Saw for Cutting Pipes, Profiles, and Bars is widely used in all locksmith workshops where cutting precision, quality, and speed are essential. This model features a swiveling arm from 0 to 60°, and the saw guides are based on carbide inserts. The frame's design ensures accurate and quiet operation. Machine Features The horizontal metal band saw with a swiveling arm allows cutting both perpendicular to the material axis and at any selected angle from 0 to 60°. The material can be fed manually or by any mechanical device, while the saw feed operates automatically. The blade guides are equipped with special carbide pads and bearings, which have a significant impact on the guidance, longevity, straightness, accuracy, and cutting quality of the blade. Carbide guidance greatly reduces wear on both the machine and the blade. The machine is equipped with a high-performance coolant pump with a closed coolant circulation system. The saw arm is made from a single cast iron piece. Used with a 27 mm wide saw blade, this enables consistent batch cutting of both profiles and solid materials. The vise is positioned on an adjustable bed and features a quick-release clamp. Blade guides feature carbide pads and a roller bearing system, ensuring straightness and precision of cutting—features directly attributable to the use of carbide guides. The base supports a cast iron worktable with a swiveling arm and a control console mounted on a separate arm. In operation, the primary cutting motion is provided by the movement of the band saw blade, with the arm descending as the feed. The descent speed (cutting speed) is regulated via a hydraulic cylinder. Feed rate is set on the saw's control panel. Two band speeds are available: 37.5 and 75 m/min. Upon completion of a cut (when the arm is lowered), the saw blade drive switches off automatically. Safety is ensured by blade guards and microswitches that stop the motor when the cutting cycle finishes or any guard is opened. Additional protection includes automatic shutdown if the blade breaks. Power transmission uses a motor with a worm gearbox. A motor with a thermal overload switch protects against overheating during operation. Technical Specifications TOTAL POWER: 1.5 kW POWER SUPPLY: 400V 50Hz ARM DESCENT CONTROL: hydraulic cylinder BLADE DIMENSIONS: 2450 x 27 x 0.9 mm BLADE SPEED: 37.5 / 75 m/min VICE BASE HEIGHT: 900 mm MACHINE DIMENSIONS (WITH ARM RAISED): 1720 x 800 x 1800 mm WEIGHT: 215 kg Cgsdeudi Unjpfx Aqxow Cutting Capacities: Angle | Round | Flat | Square -----|-----|-----|----- 0º | ø220 | 260 x 140 | 200 x 200 45º R | ø160 | 160 x 140 | 160 x 160 60º R | ø100 | 120 x 100 | 100 x 100 Note: The price does not apply to machines purchased in Poland.

Kondisi: baru, Saw blade diameter: 300 mm Cutting capacity at 90 degrees: round 102 mm Cutting capacity at 90 degrees: square 90 mm Cutting capacity at 90 degrees: flat 120x80 mm Cutting capacity at 45 degrees: round 90/80 mm Cutting capacity at 45 degrees: square 80/70 mm Cutting capacity at 60 degrees: flat 90x70/85x70 mm Total power requirement: 1.5/2.0 kW Machine weight: approx. 0.135 t Space requirement: approx. 0.5 x 1.05 x 1.0 m Codjfg Rlaspfx Aqxogw The versatile professional metal circular saw. Outstanding in performance and price. · For mitre cuts to the left up to 45° · For cutting steel, stainless steel, and, to a certain extent, aluminium profiles · Spindle vise with double clamping arm for burr-free cuts · Taper safety clutch to protect the saw blades · 2 speeds: 33 + 66 rpm · Automatic cooling system directly onto the saw blade · Saw head with double bearing · 24 V safety switch in handle with restart protection · Length stop, assembly tools included · Fully enclosed cast body, heavy-duty cast components · Mitre adjustment on operator side · Machine base (optional) ATTENTION: Price is without saw blade!! (Saw blade price €93 / €123)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1976, Universal tool milling machine Manufacturer: DECKEL Model: FP 1 Year of manufacture: 1976 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5008 grey blue Machine no.: 52860/08 Milling head no.: 7296/80 Warranty: 12 months, single-shift operation from delivery, on the mechanics overhauled by us. The electrical and electronic components are excluded, as they were only tested for functionality. For machines located outside our North Bavarian sales region, travel expenses are to be borne by the customer. Geometric inspection with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 Cgsdpfx Aqemhfrrsxow - Coolant system - Operating manual Used, as seen Technically, the machine corresponds to the standard of its original year of construction.

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), DE-SMS MEER CNC-DOPPELSEITIGE ANFASMASCHINE Hersteller: SMS MEER Typ: RFA 14 Baujahr: 2000 Arbeitsbereich: Rohr-Ø 21,3 – 114,3 mm Wandstärke: 2,3 - 11 mm Länge: 6-12 m Bestehend aus zwei RFA14-Angleautomaten mit Fördereinrichtungen zwischen den Maschinen. Die Aufgabe der Maschinen ist das Anfasen der Innen- und Außenseite beider Rohrenden. Der Durchmesserbereich der angefasten Rohre beträgt 21,3-114,3 mm bei einer Wandstärke von 2,3-11 mm und einer Länge von 6-12 m. Cgsdpfx Ajghrgujqxsw Die Aufgabe des Transports im Bereich der Anfasmaschinen besteht darin, die Rohre vom Rollgang aufzunehmen und zwischen den Anfasmaschinen zu bewegen.