Mesin pembengkok

Zopf T 300 Multisteuerung neue Ausführung

Kondisi: baru, Pressure: 28 t Stroke: 180 mm Table size: 300 x 550 mm Piston diameter: 130 mm Working speed min.: 2 m/s Working speed max.: 9.8 m/s Return speed: 20 mm/s Maximum pressure: 200 bar Machine weight approx.: 0.65 t Total power requirement: 4 kW Space requirement approx.: 1.15 x 0.75 x 1.1 m • The Profi Press horizontal bending and straightening press is a versatile hydraulic press, specifically designed for carrying out bending, profiling, and straightening operations. The machine's applications are varied and depend on the accessories installed on the worktable, tool holder, and in the holes and pin holes. • The HB-28 model is equipped with an angle scale on the worktable for light bending measurements. The press can also be supplied with tools (such as block punches) that can be mounted on the tool holder, as well as tools installable in the holes and pin holes to perform a variety of operations. • The hydraulic system can be adjusted using the pressure and flow control valves, which influence the press force and the speed of the press. The press is equipped with a built-in pressure gauge. • The control panel is used to operate and display the piston stroke, and to select between manual or automatic operation. The HB-28 model is also fitted with an integrated memory for up to 4 different programs. • Operation is via electric foot pedals. Nlodogvkmrepfx Abgoi

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: Njdpfxehzbips Abgsli - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: baru, Mesin Tekuk Horizontal Fastech FP 30 Deskripsi: • Tekanan: 30t • Langkah: 285mm • Tinggi alat maksimum: 250mm • Plat baja sisi tinggi: 200 x 18mm • Kecepatan kerja: 10,0mm/dtk • Kecepatan balik: 10,0mm/dtk • Tinggi kerja: 930mm • Meja: 660 x 1250mm • Kebutuhan daya total: 3,0kW Njdefg Eu Uspfx Abgsli • Motor: 400 Volt 50Hz • Berat: 850kg • Dimensi P-L-T: 1250 x 650 x 1250mm • Kapasitas oli: 40,0l Perlengkapan: • Mesin tekuk horizontal hidrolik • Area kerja kokoh dari baja stabilisasi • Mesin dari baja tempa yang dikeraskan dan diasah • Tampilan digital untuk pengaturan langkah • 1x set perkakas • Sakelar kaki ganda

Kondisi: baru, Tahun pembuatan: 2025, Maximum pressure: 40 tons Stroke length: 250 mm Maximum speed: 10 mm/sec Return speed: 20 mm/sec Nlsdpfx Ajhgihkebgsi Worktable: 660x1250 mm Working height: 900 mm Oil tank: 60 liters Maximum workpiece height: 5 mm Flat capacity: 200x26 mm Tube capacity: 60x5.0 mm *not with standard tools - Digital limitation of stroke and return stroke - NC control - Adjustable hydraulic pressure - Adjustable bending speed - Fully enclosed table - The ZOPF design allows quick tool changes without loss of accuracy - The hydraulic cylinder is mounted on the heavy-duty machine table, ensuring no loss of precision even under high load - With the universal tool holder and various tools, you can work with exceptional flexibility.

Kondisi: bekas, Clamping plate, scribing/marking plate, surface plate, measuring table, welding table, straightening plate - Clamping plate comes from a measuring machine - Width: 1335 mm - Length: 3000 mm - Height: 250 mm - Plate thickness: 40 mm Nodsfc T Tqspfx Abgsli - Plate is reinforced with support ribs - Includes 4 adjustable leveling feet - Quantity: 1 piece available - Transport dimensions: 3000 x 1335 x H750 mm - Weight: 2749 kg

Kondisi: sangat baik (bekas), Travel distances 600 x 560 x 510 mm Table size 900 x 560 mm Spindle taper SK40 Spindle speeds 20–12,000 rpm Tool changer with 30 positions Control: SIEMENS 840D Nlodpfx Aevhahrjbgoi Through-spindle cooling Various accessories MARCELS MASCHINEN CH

Kondisi: bekas, Clamping plate - table of a long planing machine - Table width / Clamping width: 1845 mm Table length / Clamping length: 5505 mm 7 longitudinal T-slots for T-slot nuts: M 30 T-slot pitch: 263 mm Total length: 6230 mm Nledpfebn Amfex Abgoi Total plate height: 350 mm Weight: 11 t

Kondisi: bekas, Gewinderollmaschine ORT RP30U Njdet H Ty Uepfx Abgsli

Kondisi: sangat baik (bekas), Double spindle, C-axis FANUC 18i-TB control Turning diameter: up to 300 mm Turning length: up to 366 mm Main spindle speed: 30–5,000 rpm Counter spindle speed: 30–6,000 rpm Turret: 12 driven stations C-axis indexing: 0.001 degrees Nljdpowufdqjfx Abgei Various accessories MARCELS MASCHINEN CH

Kondisi: baik (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 1.740 mm, jarak lintasan sumbu Y: 760 mm, jarak gerak sumbu Z: 660 mm, gerak cepat sumbu X: 36.000 m/menit, pergeseran cepat sumbu Y: 36.000 m/menit, pergerakan cepat sumbu Z: 36.000 m/menit, lebar meja: 760 mm, panjang meja: 2.000 mm, beban meja: 1.400 kg, 9199 Nlsdpfx Absw Rntrogei