Beli Mesin pengepres bal bekas (181)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 119 h, Fungsionalitas: berfungsi sepenuhnya, 1 Cgsdpfxoy I Rnuj Am Ist

Kondisi: baik (bekas), Tahun pembuatan: 2012, jam operasional: 5.812 h, Baling Press Presto HPK 50 HS, year of manufacture 2012, with perforator and incline conveyor (slat belt conveyor) Manufacturer: Presto Model: HPK 50 HS Year of manufacture: 2012 Operating hours: 5,812 Drive: 30 kW Pressing force: 50 t Feed opening: 1,600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Maximum feed volume: 1.06 m³ Cycle time: 19 s Tying: 4-fold Throughput capacity at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h Codpjy Idifjfx Am Ijgt 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8,420 x 1,900 x 2,400 mm (LxWxH) Machine weight: approx. 10,500 kg Perforator, hydraulically movable Drive power: 2 x 4 kW / 400 V Throughput: approx. 220 m³/h Clear feed opening: 1,380 x 1,200 mm Incline conveyor Length: 7,931 mm Belt width: 1,400 mm Total width: 2,026 mm Incline: 29° Speed: 0.6 m/s Materials: Paper, cardboard, plastic film, PET bottles Please note: All technical data is based on manufacturer's specifications. We assume no liability for the stated information or possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, prepayment required, sold as-is without warranty or guarantee.

Kondisi: sangat baik (bekas), HSM V-Press 825 plus baler Cgedpjv Akcijfx Am Iet Pressing force: 250 kN Drive power: 4 kW Cycle time: 39 s Loading height: 958 mm Feed opening (width x height): 1195 x 530 mm Bale dimensions (length x width x height): 1200 x 780 x 700 mm Bale dimensions (length x width x height): 1200 x 780 x 700 mm Machine dimensions (width x depth x height): 1700 x 1046 x 2370 mm Machine weight: 1063 kg Type of consumables: strapping tape Waste materials: film, mixed paper, cardboard, die-cutting waste, textiles Year of manufacture: 2012-2014, price: 6,000 EUR HSM V-Press 825 pro baler, year: 2019-2021, price: 9,000 EUR

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 3.641 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 36 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.080 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, daya: 15 kW (20,39 hp), laju aliran volumetrik: 90 m³/jam, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of manufacture: 2010 Operating hours: 3,641 hours Main press force: 36 t Specific pressing force: 467 N/cm² Cedpfeu Thh Ejx Am Iegt Feed opening dimensions: 1,080 x 1,100 mm (L x W) Cycle time: 34 seconds Filling volume per cycle: 0.85 m³ Theoretical throughput: 90 m³/hour Throughput under operating conditions with a material bulk density of 35 kg/m³: approx. 51 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 15 kW Tying: 4-fold vertical, semi-automatic, with polyester twine Throughput rates at a bulk density of: – 35 kg/m³: 1.8 t/hour – 60 kg/m³: 2.5 t/hour – 100 kg/m³: 3.1 t/hour Transport dimensions (baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine weight (baler): approx. 4 t Notes: The baler has been function-tested in our workshop, subsequently stored, and is therefore available at short notice. Full machine documentation (operating manual, CE declaration, electrical and hydraulic schematics) is available. Viewing by appointment possible. No liability is accepted for the accuracy of the technical specifications or any possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2015, jam operasional: 28.748 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 570 kg, berat keseluruhan: 20.000 kg, kapasitas tangki oli: 600 l, daya: 37 kW (50,31 hp), laju aliran volumetrik: 350 m³/jam, en-1 Codpfxjvn Tg Ie Am Iegt

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, jam operasional: 30.408 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.250 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 550 kg, berat keseluruhan: 16.000 kg, kapasitas tangki oli: 600 l, tahun perombakan terakhir: 2024, en-GB Csdpfx Aeu Thhrsm Isgt

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002, jam operasional: 44.590 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 200 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 2.000 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, kapasitas tangki oli: 3.100 l, daya: 150 kW (203,94 hp), tahun perombakan terakhir: 2025, Technical Data Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 112 Year of Manufacture: 2002, partially overhauled in December 2025 Operating hours: 44,590 hours, as of December 2025 Main press force: 200 t Specific press force: 16.5 kg/cm² Feed hopper dimensions: 2,000 x 1,020 mm Feed volume: 2.65 m³ Theoretical throughput: 795 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 75 kW Tying: 5-fold horizontal, fully automatic Throughput (MSW): approx. 48 to 54 t/hour, depending on material Hydraulic oil tank volume: 3,100 L Machine weight (press): approx. 50.8 t Scope of delivery: 1 unit baler MACPRESSE, type 111A 1 unit operating manual with CE declaration, electrical and hydraulic diagrams Comments: The machine has been serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank drained and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Dismantled press ram, disassembled into individual parts, overhauled the mechanics • Replaced the front two main running rollers • Replaced the knives on the press ram • Main hydraulic cylinder dismantled and disassembled, checked cylinder tube and piston rod, replaced complete set of seals • Counter-blade in the frame replaced • Knife clearance adjusted to approx. 3 mm • Upper steel guide rails on the left and right in the frame replaced • Removed worn press floor, replaced base plate with wear-resistant HARDOX steel • Dismantled tying and twisting unit, disassembled, overhauled the mechanics, replaced all twisting shafts and ball bearings • Replaced all wire spools in the needle heads Cgodpfx Ajx Dnb Uom Iet • Cleaned and readjusted wire cutters, lubricated and tensioned chains • All wire guide rollers refurbished • All door contact switches replaced • Vibulator dismantled, disassembled and serviced • General maintenance performed Finally, the baler was tested in both manual and automatic modes; see our video of the machine function test. Complete documentation is included (operating manual, CE declaration, electrical/hydraulic diagrams). Inspection is possible by appointment. We accept no liability for the technical data or possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 170 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.800 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat keseluruhan: 40.000 kg, kapasitas tangki oli: 3.000 l, tahun perombakan terakhir: 2024, For sale is a used bale press system consisting of a chain belt conveyor designed for below-floor operation, equipped with a feed hopper, a hydraulic pre-compressor with agitating device, a MACPRESSE 111A baler, two complete wire feed frames each with five wire reel stands (without wire). Technical Data – Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, overhauled in 10/2024 Main press force: 170 t Specific pressure: 14 kg/cm² Feed chute dimensions: 1,800 x 1,020 mm Fill volume: 2.5 m³ Theoretical throughput: 750 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 55 kW Binding: 5-fold horizontal, fully automatic Throughput: approx. 30 to 35 t/hour, material dependent Hydraulic oil tank volume: 3,000 L Transport dimensions (baler with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight: approx. 40 t Notes: The baler has been partially overhauled in our workshop and tested upon completion, see our functional video for reference. The system was previously used for baling paper and cardboard from municipal collections. After the contract period ended, the press line became available for sale. Details of overhaul work and replaced spare parts can be found in the detailed photo documentation and our offer. Complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available. Inspection by appointment is possible. We assume no liability for technical details or possible errors. Technical Data – Conveyor: Manufacturer: Wagensfeld B.V. Model: Chain Belt Conveyor 1700 mm Year of manufacture: 2017 Drive power: 7.5 kW Belt speed: 14 m/min Feeder belt length: 6,900 mm Incline belt length: 12,885 mm Gooseneck length: 1,747 mm Total length: 21,271 mm Incline: 32° Usable width: 1,644 mm Height of drive axle above ground: 5,777 mm Side wall height feeder: 500 mm Side wall height incline: 880 mm Steel carrier height: 40 mm Carrier spacing: 1,200 mm Transport dimensions (dismantled): 15,005 x 2,503 x 2,435 mm (L x W x H) Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Notes: The chain belt conveyor (year 2017) was custom-built and installed to match the press during the last installation in the Netherlands. The conveyor is in good working condition and was not overhauled. A layout drawing with pit dimensions is available. Cgsdpfx Aeu Th D Rom Ijt Scope of delivery: 1 chain belt conveyor by Wagensveld B.V. 1 feed hopper with pre-compression flaps 1 agitating device 1 MACPRESSE baler, type 111A 2 wire feed frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic diagrams

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 13.209 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar bukaan pengisian: 1.050 mm, panjang bukaan pengisian: 1.250 mm, lebar bal: 1.100 mm, tinggi bal: 700 mm, berat bal: 500 kg, kapasitas tangki oli: 400 l, tahun perombakan terakhir: 2025, laju aliran volumetrik: 108 m³/jam, en-GB Cgsdew U Dt Nepfx Am Ist

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. Cjdpfxjvf E Avj Am Iogt - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, jam operasional: 32.169 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.320 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 750 kg, berat keseluruhan: 22.000 kg, kapasitas tangki oli: 900 l, For sale is a complete baling plant consisting of conveying equipment, baler (partially overhauled and tested), and wire stations. Technical data for the baler: Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main ram force: 60 t Pre-pressing force max.: 25 t Feed hopper dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Bale dimensions: 1,100 x 720 mm, length variable Drive power: 45 kW Total connected load: 60 kW Tying: 5-fold vertical Throughput rates: Cedsviwdmspfx Am Isgt With bulk density of 30 kg/m³: approx. 5.5 t/h With bulk density of 50 kg/m³: approx. 10 t/h With bulk density of 100 kg/m³: approx. 16 t/h Bale weights: 400 up to 750 kg (depending on material) PLC control: Telemecanique TSX Micro Machine weight (baler): approx. 22 t Scope of delivery: 1 chain belt conveyor 1 Bollegraaf baler HBC 60A with wirbulator 1 maintenance platform with access ladder 2 wire stations with deflection pulleys for 10 wire spool racks (without wire) The following repair and overhaul works were performed: - Hydraulic oil tank fully drained, cleaned, and refilled with new oil - Oil filter and air filter replaced - Hydraulic block partly resealed - Hydraulic hose on hydraulic block replaced - Wire feed wear tracks at bottom passages welded and smoothed - Tying mechanism cleaned and serviced - Electrical system refurbished, some door switch contacts replaced - Wirbulator repaired - General maintenance performed, lubricated - Machine tested in running mode, without material, in manual and automatic mode (see functional video) Remarks: The plant has already been fully dismantled, stored, and is available at short notice for loading. Documentation (operating manual, CE certificate, electrical/hydraulic circuit diagrams) is available. Inspection possible by appointment. We accept no liability for technical data or possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2009, jam operasional: 22.029 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, lebar bukaan pengisian: 1.000 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 16.000 kg, daya: 45 kW (61,18 hp), tahun perombakan terakhir: 2025, Technical data of the baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 h (as of December 2025) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput rates at a bulk density of: Cgsdpfjx A U Ncex Am Ijt - 30 kg/m³: approx. 6.0 t/h - 50 kg/m³: approx. 10.5 t/h - 100 kg/m³: approx. 17.5 t/h Bale weights at a bale length of approx. 1.2 m: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Baler dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (baler): 16 t Special equipment: - Wear-resistant base made of HARDOX steel - Special press ram for compacting "difficult" materials and loose bulk goods of small grain size - Control cabinet air conditioning - Machine stand increased by 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following work has been carried out and parts replaced: • Dismantling of the press ram, disassembly into individual components, servicing of the mechanics, replacement of the following plastic wear rails and plates: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Main plastic wear plate (support plate) centrally under the press ram • Replacement of steel guide rails left/right at the top of the frame • Replacement of the complete base plate, four-part, made of wear-resistant HARDOX steel • Wire feed rails in the press base newly welded and smoothed • Replacement of the counter knife, two-part, in the frame • Adjustment of the knife clearance to approx. 2.5 mm • Dismantling of tying and twisting unit, disassembly into individual components, servicing of the mechanics, replacement of all deep groove ball bearings and axial bearings on the twisting shafts, cleaning and adjustment of the wire knives, chains greased and tensioned • Support roller in front of twisting shafts renewed • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for tightness • Hydraulic oil is only one year old, was chemically analyzed, is still in good condition and was therefore not changed, but can continue to be used • General maintenance carried out Finally, the baler was subjected to a machine test in manual and automatic mode, see video for machine function test.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, gaya penekanan: 80 t, dixi-80-sld-horizontalpresse Cgodpfx Aoy Iykxem Ist

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 40 t, berat bal: 370 kg, HSM-HL-4010-ReLi-HU-IT-LT Cgsdsy Iyd Sjpfx Am Iot

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, lebar bukaan pengisian: 1.195 mm, panjang bukaan pengisian: 65 mm, panjang bal: 120 mm, lebar bal: 110 mm, tinggi bal: 120 mm, berat bal: 550 kg, lebar total: 1.570 mm, tinggi total: 2.985 mm, panjang total: 1.800 mm, berat keseluruhan: 2.403 kg, Merek: HSM Cgjdpsy Iwcxjfx Am Ist Tipe: V-Press 1160 plus Tahun pembuatan: 2008 Tekanan tekan: 532 kN Tegangan: 400 V Berat bal maksimum: hingga 550 kg (tergantung pada material) Dimensi bal: 120 x 110 x 120 cm Berat mesin: 2403 kg Dimensi mesin: 180 x 157 x 298,5 cm Ukuran bukaan pengisian: 119,5 x 65 cm Kondisi: sangat baik! Video mesin dalam keadaan beroperasi tersedia berdasarkan permintaan.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 2 t, panjang bal: 1.200 mm, lebar bal: 500 mm, tinggi bal: 400 mm, berat bal: 100 kg, berat keseluruhan: 1.820 kg, Ini adalah mesin press baling sepenuhnya otomatis yang mengikat bal dengan dua kawat baja (diameter 2,2 mm). Sebuah kipas meniup kertas limbah ke dalam mesin melalui tabung khusus berdiameter 100 mm. Kipas dan tabung sepanjang kurang lebih 10 meter sudah termasuk dalam harga. Mesin dalam kondisi kerja dan dapat diuji coba. Dijual karena jarang digunakan; ideal untuk pengepakan kertas limbah dari percetakan dan produk higienis. Cgsdpfx Amoy Ic Rue Ist

Kondisi: siap digunakan (bekas), HSM V-Press 860 baler, year 2008-2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1110 mm Feed opening width x height: 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 780 x 1200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1797 x 1247 x 2985 mm Machine weight: 2008 kg Binding material: wire Pressed materials: foil, mixed paper, cardboard, die-cut waste, textiles, big bags, polystyrene HSM V-Press 860 plus baler, year 2013-2015, price: €8,000 HSM V-Press 860 L baler, year 2015, price: €9,000 Cedpfx Asra Rbgom Ijgt HSM V-Press 860 plus baler, year 2019, price: €9,000 HSM V-Press 860 plus baler, year 2024, price: €10,000 HSM V-Press 860, new, demo model, year 2020, price: €13,000 4-fold wire bale tying Bale dimensions (L x W x H, mm): 1200 x 800 x 1000-1200 Bale weight (approx.): 500 kg Technical data: L x W x H (mm): 1213 x 1824 x 2987 Feed opening (mm): 1200 x 565 Cycle time (s): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B baler, year 2020, price: €14,000 Pressing force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Feed opening width x height: 1500 x 651 mm Bale dimensions (L x W x H): 1500 x 780 x 1200 mm Bale weight: 550 kg Loading type: manual Machine dimensions (W x D x H): 2099 x 1245 x 2985 mm Machine weight: 2336 kg Binding material: wire Pressed material: film, cardboard Idle cycle time: 25 s

Kondisi: baik (bekas), Mesin press Strautmann AutoLoadBaler Mesin press untuk: - Karton - Plastik film - Botol PET - Busa - Kaleng - Limbah elektronik Dimensi mesin (panjang / lebar / tinggi): 2047 / 2179 / 2950 mm Bukaan: sekitar 1192 mm / 575 mm Ukuran bale (panjang / lebar / tinggi): 1200 / 800 / 1100 mm Codjv Aktnepfx Am Iegt Berat bale: sekitar 480 kg Tekanan press: 530 kN Tahun produksi: 2017-2018

Kondisi: baik (bekas), 1 Cgedev Akr Rspfx Am Ist

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Model HSM HL 3521 S dengan bukaan pemuatan yang sangat besar adalah perangkat optimal untuk memadatkan sejumlah besar kertas, karton, plastik film, dan bahan kemasan lain yang berukuran sangat besar dan tidak praktis. Model HSM HL 3521 S juga merupakan spesialis untuk memampatkan bahan yang sangat mudah mengembang seperti busa. Press dibeli dalam kondisi baru dari pabrik. Selalu mendapatkan servis rutin. Harga mesin baru: sekitar 90.000 € Tahun produksi: 2023 Gaya tekan: 320 kN Berat baling maksimum: 600 kg Cgsdsy H Dazjpfx Am Iot Dimensi unit (lebar x panjang x tinggi): 7900 x 1660 x 2485 mm Bukaan pemuatan (lebar x tinggi): 800 x 2100 mm Tersedia beberapa unit model HL 3521S dari tahun produksi: 2011 / 2015 / 2017 / 2023.

Kondisi: baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, en Cgjdpfxoy A Ibne Am Iet

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Bale Press Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Cgjdpfey Avlnsx Am Iet Year: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Cycle time: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 4-way, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on manufacturer information. We assume no liability for the details provided or any possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Viewings are possible by appointment. Sale is ex works, payment in advance, without warranty or guarantee.

Kondisi: baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Bale Press Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year: 2019 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Cycle time: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 4-way, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Csdpfx Amoy Avhcj Iegt Please note: All technical data is based on manufacturer information. We assume no liability for the details provided or any possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Viewings are possible by appointment. Sale is ex works, payment in advance, without warranty or guarantee.

Kondisi: diremaj di bengkel (bekas), panjang bal: 1.200 mm, lebar bal: 700 mm, tinggi bal: 800 mm, berat bal: 380 kg, Mesin press dalam kondisi ideal, tidak digunakan setelah renovasi. Perawatan hanya di produsen. Kondisi sangat baik. Operasi sepenuhnya otomatis. Panjang bal yang dapat diatur 600-1200 mm. Motor 15KW. Tahun 2007. Berat bal sekitar 380 kg. Cgedox S Sbdopfx Am Ijt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, lebar bukaan pengisian: 920 mm, panjang bukaan pengisian: 1.600 mm, Halo, saya menjual baler saluran Paal Comdec yang berfungsi penuh. Mesin telah diservis dan dalam kondisi teknis yang sangat baik. Mesin dilengkapi dengan konveyor sabuk. Pada tahun 2025, sabuk konveyor telah diganti. Csdpoyk Uzpsfx Am Ijgt